1 / 2
Feet for Workbench (Storage Works and others) — image 1
1 / 2

Feet for Workbench (Storage Works and others)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Feet for Storage Works 440lb cedar wood top Workbench. It can also fit other brands (~ 51 x 31 mm )

Rating
0 / 5
Likes
3
Downloads
14
Makes
0
Views
200
Reviews
0

Updated at source:

Model information

Category
Garage
License
Standard Digital File License

These feet fit the “Storage Works” 440lb cedar wood top Workbench (Harbor Freight, Princess Auto, etc. ) It also fits a workbench with “L” shaped metal feet or workbenches that have the following dimensions: ~ 51 x 31 mm (rectangular metal frame) for the main part of the leg and ~51 x 105mm covering the full floor attachment plate.

NOTE:

> You can print these feet on standard PLA Pro or 95A TPU or any tough filament such as PA6.

> Increase the wall count depending on how much weight you are planing on placing on top of the workbench. A good start point is 4 walls at 35 - 60 % Honeycomb infill…
 

> This model has a 6mm hole for a #12 self drilling  1-¼ - 1-½ inch screw …

> To keep the feet in place you can either pressure fit it, use a #12 metal screw, or use a little bit of light glue (Acrylic based or hot glue)


Like it? , please consider donating the small amount of $1 to help me with development and Design… (via: Ko-Fi ) - Thank You!
 

*********

More of my >> workbench << series here…

*********
 

Tags