1 / 2
Feet for Workbench (Storage Works and others) — zdjęcie 1
1 / 2

Feet for Workbench (Storage Works and others)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet for Storage Works 440lb cedar wood top Workbench. It can also fit other brands (~ 51 x 31 mm )

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
200
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Standard Digital File License

These feet fit the “Storage Works” 440lb cedar wood top Workbench (Harbor Freight, Princess Auto, etc. ) It also fits a workbench with “L” shaped metal feet or workbenches that have the following dimensions: ~ 51 x 31 mm (rectangular metal frame) for the main part of the leg and ~51 x 105mm covering the full floor attachment plate.

NOTE:

> You can print these feet on standard PLA Pro or 95A TPU or any tough filament such as PA6.

> Increase the wall count depending on how much weight you are planing on placing on top of the workbench. A good start point is 4 walls at 35 - 60 % Honeycomb infill…
 

> This model has a 6mm hole for a #12 self drilling  1-¼ - 1-½ inch screw …

> To keep the feet in place you can either pressure fit it, use a #12 metal screw, or use a little bit of light glue (Acrylic based or hot glue)


Like it? , please consider donating the small amount of $1 to help me with development and Design… (via: Ko-Fi ) - Thank You!
 

*********

More of my >> workbench << series here…

*********
 

Tagi