Adjustable Swing Arm Work Lamp fixed base for workbench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable Swing Arm work lamp base
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 43
- Makes
- 1
- Views
- 776
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Standard Digital File License
This Swing Arm Adjustable work lamp base can be fixed to a workbench edge with the use of 3 or 4 x #12 1-¼" screws (6mm). The base is specifically made for the smaller “Adjustable work lamps” with a barrel base of ~12.3 mm (~0.48 inch) and the standard barrel base of 13mm (~0.51 inches)Such as the ones found at Walmart, Harbor Freight, Ikea, etc…
Note:
Please use a strong filament ( with 4 walls+), Supports are needed depending on the orientation of the print. (Tree Hybrid)
You can also use Scotch / 3M VHB or Extreme tape to attach the base to the edge of the table. However, screws are recommended for durability… (#12 1-¼" screws (6mm))
Like it? , please consider donating the small amount of $1 to help me with development and Design… (via: Ko-Fi ) - Thank You!
*********
More of my >> workbench << series here…
*********