Adjustable Swing Arm Work Lamp fixed base for workbench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable Swing Arm work lamp base
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 776
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
This Swing Arm Adjustable work lamp base can be fixed to a workbench edge with the use of 3 or 4 x #12 1-¼" screws (6mm). The base is specifically made for the smaller “Adjustable work lamps” with a barrel base of ~12.3 mm (~0.48 inch) and the standard barrel base of 13mm (~0.51 inches)Such as the ones found at Walmart, Harbor Freight, Ikea, etc…
Note:
Please use a strong filament ( with 4 walls+), Supports are needed depending on the orientation of the print. (Tree Hybrid)
You can also use Scotch / 3M VHB or Extreme tape to attach the base to the edge of the table. However, screws are recommended for durability… (#12 1-¼" screws (6mm))
Like it? , please consider donating the small amount of $1 to help me with development and Design… (via: Ko-Fi ) - Thank You!
*********
More of my >> workbench << series here…
*********