Counting matching models…
Designed roughly after my Accordion / Ziehharmonika / Ziach / Quetschn / Zugin / Zugan / Rumpi / … however you call it 😅 You can print the flat version out of TPU and stick it to the wall at the position of a door handle as doorstop. Or…
I tried to recreate the Standard LEGO Head for some future projects. Dimensions are possibly not 100% correct as i am no LEGO-Designer :-) The “non-functional” file without hole has an overhang of 65° around the neck. The files including…
This Camera Mount attaches your Webcam to the X Gantry! The “NebulaScrew” is needed anyway - and regarding the "NebulaMount" there are a few different versions: X4 Short (50mm “arm” length - camera gets blocked by extruder while homing)…
Diese Semmeldrücker wurden in F360 erstellt (das alte Design unter Zeitdruck, da Brötchenbacken am Nachmittag geplant war, deshalb nur ein Kreis als Basis). Dieses Design wurde aber noch überarbeitet, um beim “drücken” der Semmeln die…
I was not happy seeing how the cable on the extruder was hitting the Z-Rods and the Top-Bar while homing X and while printing near Z-Max (with the original cable clip the cable touches the top bar at around z=20cm. So it was time for my…
Spider and Spiderweb designed in Fusion 360. You can set the nozzle diameter to 0.5mm for a single wall line on the Spiderweb (even with a 0.4mm nozzle). I even tested 2 extrusion lines per Spiderweb-line (set nozzle to 0.4mm and…
This new mount repositions the Filament Runout sensor, because the original one guides the filament directly onto the extruder cable connector on the extruder. It basically is a 20mm extended part, made to be printed without support and…
I was looking for some nice Geometric stuff to print with dual color filament and found this amazing design from https://www.printables.com/de/@dgemily and adjusted it to make it faster to print. Instructions: Print Wolf-Fox-Simplified (I…
Simply scale it to your needs and hit print (or slice and then print 😂). Make the contour bigger using horizontal expansion in your slicer (the right bunny in the picture). I tried to create this file using 3D Builder - and it worked nice…
When I got my KLP1 there were some problems by design. One Problem was the lower belt on the right rear side. The idler pulley is mounted too far to the left, resulting in a non-parallel belt path, resulting in different belt tension…
Print it face down, preferably in ABS (PETG might also work well). Has a weight of 13g compared to the 43g of the original metal part. Paint the /!\-Sign like I did if you like :-) You might need to drill the holes for the screws…
Even simpler wall mount (you can hang the poles onto the hooks if needed, maybe try stretching the part to make the hook longer if you have very wide skis).
After I uploaded my Bone-Extruder-Cover using Voronoi patterns I was asked for a clean STEP file for customization… and here it is 😉 Feel free to contact me if you find flaws or need some other improvements. Print it “face down”. The Hole…
Prints without supports. Needed parts: 2x Magnets 6x3mm (6mm diameter, 3mm thick) 7x M3x12mm Screws (black screws with flat heads work the best) 7x M3 Washers (6x to get some distance between wheels and body + 1x between "Base-Main" and…
When using the C270 in my Kingroon KLP1, I wasn't able to see very much of the build plate because of the C270's small FOV. I grabbed the cheapest “Smartphone Wide Angle Lens”-Kit on Amazon and made it fit onto my C270 using the Remixed…
The small spider is sitting behind the cards, waiting for the greedy customers to steal all your business cards… The idea is to take a spring out of a pen (infos read below) and glue it onto the pin of the spider and then into the hole of…
The “flat” Pulley fits on a 5mm axle of a Stepper Motor with a flat spot. The “bearing” Pulley has 3mm “long” larger diameter on each side of the hole to push small bearings into it. This Pulley with the bearings can be mounted using a M5…
I needed to drill large holes into Styrofoam for mounting the top bar of our new terrace roof to our house. The core structure of our house is made out of wood with 16cm styrofoam as insulation on the outside. To mount the top bar sturdy…
The remix of the mosquito was just a scaled version to adjust its height (RED). This part now is correctly cut (GREEN).
I simply closed the hole in the center (i couldnt fit a long enough screw through it anyway) and added a chamfer for SUPPORTLESS printing. This part is a remix from the Bird Temple by JobSmolders: Bird Temple by JobSmolders
I simply split the STL apart to make better use of leftover filament.
Just a modified feeder to let it print without support easier. (Removed some material underneath the round cutouts) While slicing with Cura 5.2.1 the Layers sometimes started almost mid air so I added a little grove for the Z Seam in…
These are all currently available results.
