Counting matching models…
Description: Recently, I’ve been working a lot with construction adhesive, and every time there was a problem with glue drying inside the nozzle. To solve this, I came up with the idea of making a simple tool that helps clean the nozzle…
This tool helps drill a hole centrally in the side of a board or hardboard. I used a 608RS bearing from a children's scooter, which has an internal diameter of exactly 8mm, which is the same as popular wooden dowels for connecting…
Have you ever found yourself needing to squeeze construction adhesive into a narrow gap, only to realize that the standard nozzle was too thick? If so, help is on the way: A flattened nozzle for construction adhesive or silicone. Fits…
Introduction Three cable clips that can be mounted on any surface using double-sided adhesive tape or glue. Print settings I recommend printing all clips in a vertical orientation to achieve maximum mechanical strength. Layer height: 0.2…
Descryption I needed a flat holder for a Shelly smart switch and some Wago clamps to connect three lines of LED spots to one Shelly and to fit it inside a purlin of my winter garden. The holder is attached to the purlin using double-sided…
I needed a holder for connecting electrical wires in my winter garden. It had to be flat to fit inside a purlin and have a way to secure WAGO connectors. Cables can also be fastened with zip ties. Maybe it will be useful to someone else…
Desorption A simple container for eleven 608 bearings with a threaded cup. Print settings Layer height: 02.mm Nozzle: 0.4mm Infil: not applicable Supports: no Brim: no
It’s basically the same as just adapted for AAA batteries and rechargeable AAA cells, with the tolerance slightly reduced so the batteries fit a bit more snugly. Print settings - Material: Any - Nozzle: 0.4mm - Leyer: 0,2mm - Infill: 20%…
The Fabryka Samochodów Małolitrażowych (transl Small Car Factory), commonly known as FSM, was a Polish car factory
Dust Cover for Magnifying Glass Lamp A while ago I bought a magnifying glass lamp. After some time, I noticed that a lot of dust was gathering on the lens, and I had to clean it every time before use. To solve this, I decided to design a…
These are all currently available results.
