Counting matching models…
The Bookshark - the bookmark that bites! Be carefull, you bookworms! There is a predator hiding in your books… Easy print, just 0.2mm layer height. Use ironing to get a smooth surface. See my settings in the 3mf file for details. If you…
Do you know that problem? Everytime you are in your workshop you suddenly need this one bit to adjust your tools. And of course you cannot find the bit driver. Here is the solution - just put this tiny mini bit driver to your keychain and…
This is a spoon that allows fast and precise spooning. You can easily fill your smallest and largest desiccant containers without spilling the tiny pearls - say goodbye to funnels. The unscaled spoon can hold ~12ml that is 10g of…
These are two simple bezels for the Bambu Lab P1P / P1S screen. Choose what you prefer. The bezels are optimzed to be printed with the standard 0.16 “optimal” system setting, no support or brim needed. They will be pressed on the screen…
As you can see, this is a small treasure chest - quite similar to the ones in Fortnite. I designed it as a multi part model so it can be printed in different colors. The design matches the pictures of Fortnite chests on the internet. But…
Well ... uhm ... I just had published my latest model: https://www.printables.com/de/model/606404-mini-bit-driver-keychain Unfortunally directly afterwards I got another idea: What if I double the bit driver? I just had to do it: The Mini…
This is a sliding parallel marking gauge with a metric scale. It is very usefull in wood working to draw lines parallel to an edge. You can download two sizes: A small ruler with a range of 150mm and a large one with 250mm. The small one…
While I was experimenting with trapezoidal threads I found out that this nut and bolt combination is quite a nice fidget toy. The parts are easy to print without support but they need a layer height of 0.12mm or smaller. Otherwise the…
GGs Looper! Are you tired of boring standard loot from standard chests ? Do you want some rare stuff? OK, take this rare blue chest for some fantastic loot! This was more work than I initially thought. But now it is finally finished:…
This is the better version of my fortnite treasure chest. The design of my other model was based on some pictures I found on the internet. It was close to the chest in the game but not close enough for me. So I took a deep look at some…
When working with small models sometimes my fingers just are too big. So I made a fully printable hand vise. Print everything in PLA with a layer height of 0.2mm or lower. Support is not needed. The thread is close to M12 and should work…
Celebrate your latest epic victory with this printed 3D puzzle of the Fortnite Victory Royale sign! This is a tough print. Your printer must be calibrated and you really need to deburr all parts thoroughly after printing. I recommend…
You can find serveral Bambu Lab AMS lite spool adapters for spools with a larger inner diamenter. Most of them need lots of filament and take a long time to print. I wanted to have something simpler that does not need half a spool of…
Describtion: There are a lot of AMS risers on printables and I looked at all of them. Most of them have the same issue: They are large, beefy and need supports to be printed - that means lots of filament are necessary. I wanted a riser,…
This is a toy plane that is based on the famous Boeing Stearman Model 75 biplane. https://en.wikipedia.org/wiki/Boeing-Stearman_Model_75 The toy plane has a wingspan of 240mm and a length of 196mm. It can be completely assembled without…
Howdy, wastelander! You will never guess what I found near the ruins of Lexington. Yes, a stash of Nuka-Cola Quantum! No, not only some Quantum bottle caps but even a few bottles. And one bottle was full and sealed. I immediately emptied…
I was just playing around with printable trapezoidal threads and before I realized it, I had designed a large machine vise… The vise has a clamping range of 120x120mm. It is good for circuit boards because plastic is non-conductive.…
The Sunlu S2 is a really good filament dryer. But it has a major design flaw: The hot air cannot vent out. There is simply no large enough opening in the top cover. Ok, I could just drill a hole in the cover but I like printing more than…
Start into the Year of the Dragon by decoration your mechanical keyboard with these Dragon Keycaps . The keycaps are a replacement for the ESC-key and the spacebar. They fit on Cherry switches and have an OEM profile. I have tested the…
Do you know this spooky feeling? Something is watching you… Now you can enjoy the being-watched-feeling everywhere, anytime you want - just print you own eyes! Add some double sided tape to the back and stick your eyes anywhere you want.…
Hey Loopers! Looking for loot? Here, have this large ammo box. This should keep you equipped for the next encounter. I guess you already know what this is: The Large Ammo Box from Fortnite. Print it and store all your V-Bucks in it. Or…
I am using serveral M.2 SSDs to clone and backup my computers. For storage and protection I designed a simple M.2 case. This case fits a single M.2 SSD in the very common 2280 size. Printing is easy. Use your favourite material and set…
Just a mini shelf - 170 x 100 x 50mm Print without support Use Ø4mm screws. Disclaimer: This work by blecheimer is licensed under CC BY-NC-SA 4.0 You are not allowed to copy this model to other 3D printing websites without my permission.
You know, for christmas I like it simple. A simple tree, simple LED lights and some simple decoration. So I made a simple print-in-place christmas bell with clapper for you all to enjoy. And for those who just want a bell without…
You already have the mini bit driver ( https://www.printables.com/de/model/606404-mini-bit-driver-keychain ) and the mini double bit driver ( https://www.printables.com/de/model/607231-mini-double-bit-driver-keychain )? Now you want more?…
This is a simple Cable Clamp that can be screwed (e.g. Ø3x12 screws) or glued to the underside of your desk. It supports multiple cables at once and is printed in only a few minutes. Print preparation: Make sure that your print bed is…
I needed a small flower pot for my small cactus. So I made a simple pot and a matching tray. The pot has holes in the bottom so that excess water can drain off. The opening is 83mm hex. Both things can be printed with layer heights up to…
When soldering printed circuit boards (PCBs) it is necessary to clamp the PCB. This is a simple holder that lets you clamp the PCB (or wire) that needs to be soldered. The different sides of the clamps offer different clamping…
This is something for the wood workers and carpenters out there. When you need to glue large pieces of wood you need something to apply the glue. And exactly for this task is my printable Textured Glue Roller . It has an exchangeable…
I really like mosb1000's infinity cube ( https://www.thingiverse.com/thing:3496723 ) and was thinking about making an infinity pyramid. You can find an infinity tetrahedron from errrr on thingiverse (…
Where did I put that doorstopper? Do you know this feeling? You want to stop a door but you cannot find the doorstopper. Again! With this doorstopper this will not happen to you. It has a hole so you can simply hang it to the doorhandle.…
Some pens are just too interesting to be kept in a dark drawer. They need to be presented right on your desk. Therefore I designed a pen stand in two versions: for a single pen and for two pens. Choose your favorite color, print your own…
WAKA - WAKA - WAKA Here comes Pacman - and Inky, Pinky, Blinky & Clyde - for your fridge! And I added a scared ghost as well, just in case Pacman finds a super-pill in the fridge... Each model is made out of at least two parts and a…
Łukasz Janikowski did an awesome job on making a printable version of Jörg Sprave's Sliding Legolini. https://www.thingiverse.com/thing:4210059 Due to censorship you cannot get the original Legolini on thingiverse.com anymore. So, just…
Do you have a mechanical keyboard with Cherry switches? Do you think that your keyboard can need some colour? Look no further and spice-up your keyboard with a Rubik's Cube Keycap. This cube is 18 x 18 x18 mm and fits most Cherry-style…
I needed some small bench dogs for my workbench to clamp small objects. The Ø20-short version fits nicely into the Black + Decker workmate's holes. The rest are for larger workbenches with different hole sizes (Ø16, Ø19, Ø20). If you need…
Cubception - this is a Rubik's Box that can hold a Rubik's Cube. Or something else. The inside is 60x60x60mm and should fit most standard Rubik's cubes. The outer dimensions are roughly 70x70x70mm. I guess that the parts can be scaled to…
Recently I bought a new Ducky One 2 SF keyboard. I just love the Cherry MX switches and the exchangable keycaps. Of course I need to make some keycaps myself. So I made a Panic-key and an Any-Key. The Panic-key is a replacement for the…
EDIT: I got a request for another racetrack, so I added WATKINS GLEN. I was thinking about re-decorating my apartment - spicing-up these old cupboards and lockers or some new pictures on the wall. As I am a huge motorsports fan it might…
Sometimes I need a tool for bending small sheet metal parts. You can buy these bending tools but they are expensive. And making is more fun then buying. So I made a bending tool for fine sheet metal parts. It is fully printed and you need…
This is my interpretation of a Star Trek Communicator Badge that is used in DS9 and VOY. I made a two piece design for easier printing. Just glue the two parts together. You can choose if you want a plain badge or a badge ready for 6x3mm…
Sometimes you just need a hammer! And I mean a real one - not a warhammer or Mjølnir. Just something that gets the job done. For my sheet metal project I needed a small dead blow hammer. What is a dead blow hammer, you might ask: A dead…
I needed a sturdy camera mount with robust threads that do not break easly when torqued. A printed M20 thread seems robust enough to me. Of course I overengineered it and the result is a modular universal mount for cameras, action cams…
Spanish comic artist Francisco Ibáñez died not long ago. He was famous for "Mortadelo y Filemón" aka "Clever & Smart" or "Mort & Phil". Fans of his comics will remember the little six-leged spider that could be found outside of the comic…
What do you do when you are bored? I just design some things... This time I designed a simple smartphone stand that can be used with small and large phones. My Samsung A5 with attached bumper (5.2") fits nicely and even my large Pixel 6…
Disclaimer: Due to the recent incidents (things appearing on ebay) I just want to make something very clear: I do not allow any commercial use of my STL-files, my designs and my photos! Description: Maybe some of you know the problem: You…
This is a Nuka-Cola bottlecap. A very, very big bottlecap… I made two models, one for smaller printers with a diameter of 180mm and one for the big boys with a diameter of 250mm. You can try scaling the model if you need other sizes. Both…
This is a small stand for my “Fast and Precise Spoon": https://www.printables.com/de/model/556258-spoon-for-fast-precise-spooning A comment of an user on makerworld with the name fish_ gave me the idea of designing a stand - so, thank you…
Disclaimer: Due to the recent incidents (things appearing on ebay) I just want to make something very clear: I do not allow any commercial use of my STL-files, my designs and my photos! Description: Maybe some of you remember my…
A real ball bearing needs a cage to separate the balls. So I changed my first ball bearing ( https://www.printables.com/de/model/236154-another-ball-bearing ) to 8 balls and added a cage. I was a little suprised that the cage really…
It is getting close to christmans and I was looking for some decoration. So I made a Super Mario Shining Star. The star is hollow and has a groove for a 12V LED strip (~10mm width). I recommend a strip with 60 LEDs/m. I have used 120…
This is the imperial (inch) scale version of my sliding parallel marking gauge . It is very usefull in wood working to draw lines parallel to an edge. At the moment you can only download the short version (~5.8 inches) that can be printed…
This is what annoyed Picasso the most: Drop your used paintbrush on the expensive dining table. And now you have a solution for the Picasso-problem - The Paintbrush Rack with Removable Tray Just an easy print: 0.2 layers, 3 walls, 4 tops…
Maybe you have already seen my Magnetic Bit Driver Handle . Now here is an alternative version: The Stubby Magnetic Bit Driver Handle Features: Can be used with every 1/4'' (6.35mm) standard bit Bits are hold in place by a Ø4x2mm magnet…
“Let 'er rip” - epitaph of Leslie Nielsen This is a printable, portable, hand-operated fart machine. You need TPU for the print. TPU90A is very much recommended as it is flexible AND robust. I expect that harder TPU will tear between the…
This is a very soft version of the great X52 Spring Plate. RabidRedRabbit, already made a soft version: https://www.thingiverse.com/thing:2405980 But I still want it a little bit softer. So I reduce the overall height thus compressing the…
This is just a 3D coordinate system. What can you do with it? - I have no idea... Why did I design this thing? - Because I can... Print 1x center piece and 3x axis pieces. Stick together. Use glue if necessary. Disclaimer: This work by…
It is a struggle - the more you print the more space you need to showcase all the makes. But wait! Now you can print space - with my new designed Floating Corner Shelf ! The size of the shelf is 185 x 185 x 240mm. You need 4x 4.5mm screws…
Me and my friends enjoy watching really bad B or C movies. For a friends birthday I designed a simple DVD stand that features two of the most well know movie monsters: Godzilla and KingKong To give some extra weight to the stand (white…
Oh no, not again another ball bearing... Sorry, but I just have to show my final design. jonathanw's comment on my last ball bearing ( http://www.thingiverse.com/thing:57762 ) gave me new ideas. I reduced the bearing to three parts. The…
"Do you like melted chocolate? Do you like melted faces? Melt whatever you want with a Maliwan!" – Mad Moxxi This is a Maliwan Ammo Box from Borderlands 3. The lid can be opend, the tray inside is optional. Take it out if you want some…
I was playing around with my 3D scanner and this is the result: Large & small paperbags There are two model - the small one fits all printers, the large one is for A1, P1, X1. But of course you can easily scale them in the slicer to any…
When I am using my X52 HOTAS together with my Oculus Rift I have to find all switches blindly. For me it is difficult to distinguish between the three T-switches at the base of the joystick by just touching them. So I made a clip-on cover…
Description: As I have now a Micro Dumper ( http://www.thingiverse.com/thing:32773 ) I need something to play with. And what matches a Dumper? Right - an excavator. My Micro Digger is 25 x 25 x 23 mm (1 x 1 x 0.9 in) and has a fully…
Keep Christmas simple - with this simple hollow Christmas bauble! The bauble has two halves that are connected by the middle belt. It is hollow and has an opening on the top so you can put a LED inside (eg from a fairy light). Print…
I prefer cars that are powerfull, rare and a little bit cranky - in short, I like english sportscars. Since some time ago I am a proud owner of a TVR Cerbera 4.5 - a monster that tries to kill its driver each time you take it for a ride.…
Ten years ago I designed a frame for a Lotus Seven Replica. Today I tried to print this frame without any change (just scaled it down to match the bed of my Ultimaker). I also did not use any support. The result is far from being ok, but…
Disclaimer: Due to the recent incidents (things appearing on ebay) I just want to make something very clear: I do not allow any commercial use of my STL-files, my designs and my photos! Description: I was tired of using the crappy…
For my projects I have to solder quite a lot. It might be a good idea not to inhale the soldering fumes - so I designed a fume extrator and filter from parts I had laying around. You only need an 80x80xmm PC fan and a sheet of activated…
Doors are not your friend? They hit you in the back everytime? Today it is time for revenge! Suprise your door with this minimalist doorstopper. It is so small your door will not realize it until it is too late. I recommend you print this…
This is a full size prop of the “Outatime” license plate from the movie Back To The Future. Its size is 12" x 6" (304,8 x 152,4 mm). Because of this large size it can only be printed on a printer with a printbed that is minimum 305mm. I…
Disclaimer: Due to the recent incidents (things appearing on ebay) I just want to make something very clear: I do not allow any commercial use of my STL-files, my designs and my photos! Description: To keep my screwdrivers in place I…
Over the years I have collected a lot of bits in different forms and sizes. But without a bit driver they are pretty much useless. Therefore I have designed this Magnetic Bit Driver Handle . Features: Can be used with every 1/4'' (6.35mm)…
I just hate to crawl under my table to plug-in an USB stick. So I designed a simple UBS holder for two AmazonBasics USB 3.0 extension cables. The extensions can be clamped in the holder and then screwd to the table. There are two…
Description: I like small things. And I like vehicles. Why not combine both and make a very small dumper? The Micro Dumper I designed is 25 x 20 x 17 mm (1 x 0.8 x 0.65 in). I was curious if my Ultimaker can print such a small object...…
Disclaimer: Due to the recent incidents (things appearing on ebay) I just want to make something very clear: I do not allow any commercial use of my STL-files, my designs and my photos! Description: On a stressfull office day I always…
I needed a planter for my desert rose (adenium obesum). So I started to design something. At this point it got all out of hands... This is a diorama of an oldfashioned, dark and forgotten corner of an unknown street. Some might remember…
Time to organize things - so where do I put my headset? Maybe I should just design and print a simple wall hanger for headsets? ... OK, done! Category: DIY
For breakfast I like a hard boiled egg. But I do not like peeling the egg, so usually I cut the top of the eg with a knife. And of course I hit my fingers. More than once… The solution are egg cutters, or egg openers or breaking point…
Citizen! Do you love freedom? Do you love liberty? Then you love Helldivers! Show your dedication for managed democracy with this printable Helldivers Spacebar Keycap! This is a printable Helldivers spacebar keycap for mechanical…
This is just a very simple stand for a single DVD or Blu-Ray. It might even hold smaller smartphones... (not tested). Print it fast and ugly. 0.3mm layer height is possible if your printer supports it. Category: DIY
My TVR Cerbera is now 21 years old and some small parts are hard to get, e.g. the rubber stoppers for the bonnet (TVR U0811). They are sold out everywhere. So I made a casting mould for them. Print the models at 0.1mm layer height. 0.2 mm…
I was looking for a stand to keep my fountain pens upright. I did not find something that I liked so I designed something. This pen / tool stand is shaped like a spring and it even has some flexibility. There are four designs: straight…
Now you can fight your icy windows with a smile! This little helper scrapes ice of your car's windows in two directions. Push and you will scratch ice, pull and you will scratch ice, too! Get your windows ice-free in half the time. The…
I planted a little bit of garlic in my garden. Just in case of a vampire invasion - you never know… To find the garlic again later I designed a simple sign. Print preparation: Make sure that your print bed is clean and grease-free and use…
I did not know where to hang my winter coat so I tried some door hangers I found on thingiverse. Most of them broke immediately or after some days - my coat was just too heavy. Other looked quite robust, but I did not like the design. So…
Last week I got some new filament for my little Fabrikator 2 Mini. It was the dirtiest filament I have ever seen in six years of printing. No way I will feed my printer this material without a filter. So I designed a filament guide and…
This is a little tool for the pivot screw of the Coast-Knives' FX352. Coast-Knives is using a screw with a 5-point head for the pivot joint. To adjust the knife's folding mechanism you need a special tool. For the tool you need five steel…
Disclaimer: Due to the recent incidents (things appearing on ebay) I just want to make something very clear: I do not allow any commercial use of my STL-files, my designs and my photos! Description: I like my knifes sharp, so I am using a…
You know, sometimes you are having a bad day. And then you hit the wrong button and - surprise - it is getting worse. This seems to have happened to the little bot. Someone messed around with it's program and now the bot is going berserk.…
I wanted to spice up my home office (aka "the Nerdcave") and there was a WS2812B LED-stripe laying around… A few moments later my printer started to print the first pieces of a 800x180mm Nerdvana marquee. You need: 750gr black PLA 250gr…
This is the famous German road sign #282 . It declares the end of all restriction. And you always love to see it on the Autobahn. For more information see this Wikipedia article . The size of the sign is 300mm in diameter. Scale it in x…
Citizen! Did you already try the new Helldivers Spacebar Keycap ? And now you need more? Yes, I know - democracy is addictive! Here, have a Helldivers ESC Key! This is a printable Helldivers ESC keycap for mechanical keyboards. It fits…
I never liked the original thumb lever of the Real Steel H9 Takin knife. In my opinion it was too large, too chunky and too ugly. So I designed a very simple replacement. Print it slowly at a small layer height. I used 0.08mm layer height…
The Boker JC1 knife does not have a thumb pin. It is possible to open it with one hand but this is not very comfortable. I designed a thumb pin that can be clipped on. Opening the knife is much better now. Category: DIY
The coolie hat of my old Logitech X52 hotas broke just while I was landing my space ship. After being annoyed for some seconds I designed a printable replacement. Be warned - this repair is not for beginners. It includes small screws,…
These are all currently available results.
