Counting matching models…
Simple test print to give you enough layers to check out up to 5 materials at once. It's 1 cm tall and you can scale it larger if you want it. Update 12/13/2018: Added Solid version (FlowerSolid.3mf), prints faster without the inner…
The license plate on my new-to-me Fiat 500e was missing the inserts for the lower bolts that retain the plate. The holes were 9.5mm square and I didn't have any square bolts. Instead I made these inserts. Print as loaded, no supports. I…
My clips have been broken forever. PixelPicker's clip was just the inspiration I needed to get this done. Their clip is a very good reproduction of the original, but I wanted something a little easier to print and a little stronger.…
Remixed in some female threads into this male-on-a-pole threaded 90* adapter. Print in place, no supports needed. This is a very quick, but functional, part. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No…
Print out, no supports, thread directly onto a ball jar. Generally I use vinegar (for the red ones) and beer (for the black ones). I used to add soap, but I don't find I need it. This could probably have less holes, but it works pretty…
Cool looking glasses stand I found on Thingiverse. Original post had some little hooks for the glasses stem on the side which I don't intend on using, so I cut them off. While I was in there, I resized it smaller to what I needed, fixed a…
I tried the tuna-can slug beer trap, and liked it! But watching at night, I noticed most slugs went in, grabbed a six-pack and left. I had the best luck with a can that had an overhang and thought I could print something. I found a couple…
Rain can collect at the top of the Strut (under the hood), and rust the bolt making the strut harder to service in the future. In later years, Fiat included a cap, but my car only had one. I saw a few of these online, thought I could do…
I'd spent a lot of time trying to get my e-steps right, after enough I made this tool. You put a bowden/reverse bowden in one end, and feed the printer from the other (you could just as well put it in a bowden feed to the extruder). To…
The hose broke on my Dyson - at first, I just heard a high pitched squeaking sound, with some loss of suction. Upon inspection, I saw the tab holding the "internal hose" (best guess is part number 920682-01) had broken, allowing the hose…
Just followed tutorial from Prusa newsletter. Split into two pieces and trimmed to a hexagon with 3D Builder. It is scaled 1.5x in Z, too much more looks unrealistic. Pardon the sloppy print! Print Settings Printer Brand: Creality…
For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff . Included there is a link to cwkoehler's stand for this Thing, listed here as a remix.Thanks Chris! This uses the plentiful bearings and axles from…
Kinda a real WIP. I made a series of drippers, trying to keep them from spraying instead of dripping and tried a bunch of designs. Just like the store-bought ones, if you don't have low water pressure it can be hard to get consistent…
I wanted a smaller fly trap to fit a standard clear jar, and settled on the Organic Peanut Butter from Costco. Turns out, it still doesn't fit on my MARS2, so I tweaked it a little and FFF/FDM'ed it. It printed fine, so far I've caught 0…
I came up with a battery holder for the Anker PowerCore10000, but getting the whole set up in my case required putting the battery in a bag and letting it ride the lenses. This would not do. So I spent 10 minutes in 3D Builder and hacked…
Print in TPU and keep your elegant but poorly standing trimmer vertical. Category: Bathroom
I was looking for a way to keep my house key from scratching stuff in my pocket. I was inspired by kwfredeen's cover, but wanted something that “stayed” on, was easy to remove, and easy to tell which side went up. This cover features a…
For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff The idler drum on the MMU2 uses two screws going through two square nuts to fix it to the motor's shaft. In the instructions, they mention being…
The tires on my venerable WLToys A979a finally wore out, along with the wheels all being broken and made of mostly glue, and as a replacement set was ~$15 I thought I'd try printing some. These tires are "airless", and are locked to the…
Er, I always worry when I find my gloves that I wear to prevent spider bites that the fact they are often covered in webs means they will be filled with evil spiders. I made this "chip clip" extra loose to allow the gloves to fit nicely…
I've used a few rear hubs and found that they didn't work, either by being too weak, having the wrong sized holes, or being incompatible with ball bearings. I whipped these up and they work great. Note they may not fit the a9x9b series.…
I had a transistor/capacitor tester sitting in a drawer for a couple of years, always meant to make a case. I finally did, and knocked it off the desk, breaking it just before putting it in said case. :-( I've since ordered a new one but…
For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff I have used a lot of bowden style feed-throughs that use purchased parts. These can have small outlets which drag on filament. I wanted something…
I wanted a set of road cones (I was using old tires but when you hit one they tend to roll away) for my RC car, with a few criteria: Don't roll away when you hit them. Next to carry easily (these stack on remote's antenna) Print quickly,…
A friend was told to roll her feet on an ice roller, I'd seen stainless steel rollers for sale in various stores. This allows you to take an Arrowhead brand (700 ml / 23.7 oz) water bottle, the ones with the flip top, and fill them with…
Every time I flip open the MMU to work/clean, the bolt falls out, the spring rolls away, and I spend half an hour on the floor with a flashlight. No more. Add these to your bolts, probably tighten the bolts a half turn less, profit. For…
I've had this HF cord reel for years. When I first got it, I cut the end off the cord, drilled a hole to the center, and let the cord dangle out - so I could use the cord without fully unwrapping it - it makes putting the cord in and out…
My eyepiece kept getting dusty. Having to choose between cleaning or printing, I choose printing. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Sport & Outdoors
I really liked Sixteenbit's model, but wanted color on the back - and I was more than a little inspired by his “clean” model. Anyway, I copied, dropped, subtracted, copied again and dropped the blood down again in five minutes of 3D…
When you update the firmware, you have to pull everything apart. I made this little snap in place holder that allows you to access the port through a cooling vent on the right-front. Allows you to use a common microSD to SD card adapter…
For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff If you own a Prusa MMU2.0, then you know you press the reset button 15 times for every print that comes off the bed. Which means finding a tool,…
I have a walking stick with a removable tip, and when I get to certain terrain, I remove the tip to use the spike beneath. But then what do I do with the tip? Dirty my pocket? NO MORE! Carry it around like a buffoon? NO MORE! Take off…
Someone overtightened the screws that hold the cover on the steering on my Fiat 500e. I made these inserts to add some strength. You could probably get away with something weaker/lighter, but this is hardly a weight driver. Flip over,…
This holds an Anker PowerCore10000 power bank onto the collection of Elite Strap clones here for the Oculus Quest 2. I found other solutions for holding the power bank too hard to use. I didn't have any good rubber bands, and wasn't about…
I'd suggest not using this part. See below. For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff Given the laughable state of development of the MMU, one often needs to deactivate it ENTIRELY to make…
I couldn't find a good place for my charger, so I mounted it on the ceiling. I imagine you could mount it on a wall with this. Flip part, print without supports. Break off the support for the retention tab (see picture, rectangle that…
My friend had a magnetic wired charger set up in her car but wanted a place to just drop the phone and go. I set this up (by request) to "lock" the phone in behind the shifter, so when you're in drive you cannot access the phone to…
Humidifier has a stupid bright light that keeps me awake. Now it doesn't. I printed this with supports, but could be designed to print without supports. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker…
It can be hard to load your grinder sometimes - bits can get in the center and prevent it from closing fully, or if grinding shake you have to carefully get it all in the confines. This is a quick fix type design. The parts just slip on.…
Instructions on my RO water system said "tighten with wrench" and yet there was no wrench to work with these. Will probably post pics later. No supports, I printed in PETg with like 4 walls will just make the front end solid. It fits some…
For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff I recently tried out VincentGroenhuis' awesome Universal Auto-Rewind Spool Holder, https://www.thingiverse.com/thing:3338467 but didn't want my…
For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff I find that when I have filament from one PTFE, and I feel it into a second one, after the print gets going these can bump together and cause…
I bought a few spring powered BB pistols back in the day, with this Crosman PSM45 easily being my favorite. Great for backyard plinking without expense or having to worry about hurting anyone. After a while, the feeding became unreliable,…
Customized version of https://www.thingiverse.com/thing:3232719 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3232719 Instructions Using the following options: cableLength = 156 cablesPerGroup = 10…
Customized version of http://www.thingiverse.com/thing:1943463 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1943463 Instructions Using the following options: hole_shape = Round feature_length = 1…
Non slip, non-scratch foot for a Gourmet Basics by Mikasa 3-in-1 Convertible Basket Print Settings Filament: asdasdsda TPU Category: Household Supplies
New version!! https://www.thingiverse.com/thing:4329697 Uses Prusa parts, no new dividers required. For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff This is a very early part for keeping your new…
These are all currently available results.
