Counting matching models…
I bought myself a Moza R9 base to really get down with sim drifting and rally simulators. It will not be as quick to change wheels with this adapter, because you need to tighten 2 bolts to the wheel base. But it is solid and sturdy, can…
For use with Moza wheel bases. I think they have the same shaft size at least. Wheel bolt pattern is only for 70mm, because that is the only wheel bolt pattern I have. This is a continuation of my non quick release Moza Adapter for 3rd…
I ran with a Tentacool nozzle duct for a while, but noticed it was lacking in flow. I also needed a new setup due to me using a BD Sensor M, so I started working on a new simple duct system for my Artsy printer. Which also made it work on…
A newer mod for my G27 pedals, but should for any Logitech pedals. They are in need of update, I saw now that Shaun Hutchinson G27 pedal model is not at all accurate to my G27 pedal set. Maybe there is a difference in between the models?…
I am working on designing a new exhaust manifold for my Volvo 940 turbo, and I remembered seeing a tube snap-on plastic fabrication system from a company. Searched for a 3D printed version and found don-f design over at thingiverse;…
No CMS in use; Only the outlet muffler box, with a small impact of the motor muffler box; And the full CMS in use; This was designed after watching Andrew46 present a truly awesome design for a muffler system for the CPAP motors, that…
A simple non intrusive design for implementing a load cell into your G2X pedals. I would like to thank Shaun Hutchinson, for his G27 pedals design. Which allowed me to make a quick mod for the pedals. Logitech G27 Pedals I personally use…
I have purchased a new Volvo 940, first one in 14 years. Back then I only had a stick welder to do stuff and hand tools. Now I got 3D printers, so when it was time for me to increase power in my 940 Turbo. Injectors and MAF housing will…
A simple coin tray a friend asked me for.
A holder for 2 different inductive probes, STEP file and .f3d file are available. So they can be easily adjusted to fit your needs.
Never been a fan of the “A-beam” gauge mounting cluster, former owner had loosely mounted one. So I decided this time I would just remove the ash tray and that little storage compartment which I never use anyways so. Here it is, 3 gauges…
This enclosure is made for the Speeduino 0.4.3C ECU board, with a MEGA 2560 MCU. It also comes with a mounting plate, for Volvo 940 and perhaps 740 as well, in the same place as the stock LH 2.4 fuel ECU box reside. Fits behind the…
I needed a new PC case for one of my PC's. I have recently built a “His & Hers” J shaped computer desk for me and my girlfriend. The criteria for this project was; Quiet Compact Simple Easy printable parts Large simple parts milled out of…
A simple mount to allow toolboards to have it's cables come out vertical instead of at an angle. Primarily made for mounting with the ProtoXtruder v1 & v2, but should fit other Nema 14 pancake stepper motor printheads with and open…
A 3D printed PC case I designed to be used for my server computer. However I never got around to finishing it, due to the parts broke down from a short circuit. But I figured someone else might find this case interesting enough to use it.…
Another Volvo 940 Turbo part. I wanted a more high flowing air filter, that also sucks in cold air and is "shielded" from the warm air in the engine bay. So I came up with this tube design, that utilizes the stock hole that is not…
One of the first things I wanted to upgraded on my Chevrolet Monte Carlo '76. Was the intake filter system, as well as using my 3D printer for a car project. So I came up with this design, not optimal in terms of it sucking the hot engine…
Both a 3mf and step file are available, for end user customization and just plain printing as is.
A simple locking mechanism I made for the louver/jalussi accessory to Volvo 740.
A simple mounting plate to screw on top of the valve cover to allow a fixed position of a wasted spark coilpack from aftermarket or OEM packs. Features the mounting holes fitting the 032 905 106B coilpack, or wasted park pack with built…
Another model of a TPS adapter to use on a stock B230 throttlebody, my 14 year old bosch style TPS adapter was faulty due to trace or brush being worn inside of it, possibly also a very loose fit on this chinese made low priced unit. This…
I needed a handbrake for my simulation rig, and I couldn't find any one handbrake that fit my requirements. Also no one so far have utilized a force sensitive resistor, and I had such a thing laying around from a previous project. All…
Another TPS adapter among many, I came up with this for a minimal solution instead of the bulky ones out there. This does however require you to both shorten the throttle body butterfly axle/rod by the required amount your particular TPS…
My kid had the urge to get into sim driving like I have been for some years. So I started designing a foldable rig that could fit his needs. Originally designed for a Logitech G29 wheel with accessories, I ended up using it for myself and…
My kids telescope, a Skywatcher Explorer 130. Had it's focuser tubes rack break, the gears was stripped. So I looked at replacements on the market, as well as 3D printed ones. But no one fitted my kids telescope as is. So I started…
A simple model of th sway bar bushing in the front, for the 22mm diameter bar.
Some simple seals to prevent vacuum or boost leaks, couldn't find any reseller sotcking replacements for the throttle linkage side, and while I was at it I figured I could do one for the O-ring side as well.
Before going knee deep in building my upcoming intake manifold, I cam up with this idea. A plenum expander as well as a 16v to 8v intake adapter, with 3 vacuum ports and 1 IAT port. For turbo charged engines I would go the route I will,…
I made this model so I could make an adapter to fit he 8v intake manifold, but I wasn't satisfied with how it would be sitting on it. It is a functional part, and I didn't bother making the whole throttle body as I did not need it. 16v…
The plate was made in 5083 cast alu, pre-milled for flatness. The round plug was made out of PET, I think it was. We do not sort our plastics well at work. The plate recieves a O-ring with the dimension of 50x3.5mm, so IDxThickness. The…
Before going out and purchasing a seperate proper BOV unit, which I would place closer to the throttle than the built into the turbo BCV unit of the stock Mitsubishi TD04 turbo kind. I thought it could be fun to see what one can do with a…
Only a template for designing a PCV box or plate, can be used to double check fitness by 3D printing it out. The holes are to allow it to fit on the bottom of the stock PCV box, either the NA kind or the turbo kind. Drain hole is 18mm…
These are all currently available results.
