Counting matching models…
DDD Printable Wall Control System The DDD Printable Wall Control project provides a wide range of modular pegboard hangers for use with the Wall Control powder-coated steel pegboard solutions available on Amazon . After much research I…
DeWalt AirLock compatible twist-lock dust collector fitting I like DeWalt tools well enough and own a bunch, but like every other tool vendor their approach to dust collector connections is psychotic. I'm not at all convinced that any two…
Ever forget to close up your gas cylinders and then donate your bottle gas to the atmosphere? This project fits onto a 5-lobe Sherwood cylinder gas valve and provides an instant visual indicator if the valve is opened or closed: The…
Adapter to connect FESTOOL™ CLEANTEC™ D27 Dust Extractor to DeWalt™ Air-Lock™ tools This adapter is designed to allow a FESTOOL dust collector with a D27 hose fitting to connect easily to DeWalt tools featuring the "AirLock" style dust…
Wife was going to write plant names on popsicle sticks and I said NOPE we can waste so much more time if we do it my way. Models come with suggested colors but I'm not here to tell you what to do, have fun go bananas!
This STL is an 8-up copy of the Photonsters Resin Exposure Test v2 arranged for use with the Anycubic Photon M3 Plus. Here's what I've done: Subdivided the 197mm x 122mm build platform into 8 equal sections Scaled the original STL by 95%…
I needed a cover for a 4" exhaust vent and this project is the result! Features Fits 4"/100mm vent pipe Wall mount has standard 105mm screw spacing to fit a 120mm fan Flap model acts as a valve when used as an exhaust vent Modular mount…
The Sunlu S1 filament dryer works nice and the price is right, but I have repeatedly run into an issue when the filament spool runs low. The spool will “rack” in the enclosure, twisting to one side, and then get wedged into position…
This project provides the models for a printable vacuum clamping system utilizing the Dewalt Grabo DCE592B lifters. All fittings are ¼" push connect lines and ¼" NPT thread. BOM Dewalt Grabo DCE592B lifter Minwax Polycrylic sealant 1/16"…
Print in PETG or TPU, the jaws are printed face-down so the gripping surface can match your print bed (use smooth bed for smooth jaws, textured for texture, etc). Geometry was 3D scanned from the tool for precise fit, this should easily…
Fire HD 10 Tablet VESA Mount This model provides a 100x100 VESA mount for a 2019 Amazon Fire HD 10 Tablet . They're big, reasonably reliable, and dirt cheap. Project page Please visit the project page for full details, BOM, and an…
Started with @gleonard3's awesome design and slimmed everything down to better fit in your pocket while still offering solid protection on all sides. Camera ring now prints as a separate piece and everything should print in the provided…
All credit for this design goes to @EricAnastas_578679 , I've only made minor modifications to an already-excellent model.
Tormek T-4 Rotating Base Tormek sells a rotating base for their sharpening system for $70, which I guess is reasonable if I had any money left over after buying all the damn accessories for this thing. Couldn't figure out how to print…
Gridfinity storage solutions for all the stuff that comes w/ the XTool RA2. There are two models here to hold the rollers, one with the baseplate/drive unit and one without. If you don't need storage for the baseplate, you can save…
Print in PETG or TPU, the jaws are printed face-down so the gripping surface can match your print bed (use smooth bed for smooth jaws, textured for texture, etc). Geometry was 3D scanned from the tool for precise fit, this should easily…
3D printable enclosure for the BigTreeTech SKR-Pro v1.2 controller and TFT35 v3.0 touchscreen LCD Project Repository Link Head to the project repository for the latest revision of this model along with full assembly instructions and CAD…
Fast printing fence post topper for 5x5 vinyl fence posts. No supports required, print in the provided orientation. The “user” facing side prints on the bed, so you can use a smooth sheet for a nice smooth finish or textured or whatever.
These fan housings are for use with 140mm fans mounted to a sim racing cockpit. These fans can be used with SimHub Dashboard to control left/right fan speed in response to your speed in a supported game . The rear inlet has been optimized…
Overview The Analog Discovery 2 from Digilent is a handy tool for simple electronic experimentation offering a full digital + analog lab in your pocket. Digilent offers a BNC Adapter Board for use with more traditional test probes but is…
I recently purchased the Photon M3 Plus along with their AirPure filter, only to find that there's no place to put the filter if you have the camera installed. This model sits snug on top of the resin pump and provides a platform that…
Mashup of the awesome Gridfinity Carousel by Nich Fugal made to work with the DDD Wall Control system
I've been building a lot of stuff over the years that need USB power and never found a suitable standalone enclosure solution so I've set about designing my own. Goal was to take some common AC to USB power supply and wrap the project…
I bought some Bessey TG4.540 clamps from the HD and it took maybe an hour after bringing them home before I lost one of the @#$% pads. No problem I figure, Bessey offers replacement pads and I can probably just pick some up from The Big…
I have a Prusa Lack enclosure with the lift-up lid. I wanted a way to mount a few S1 dryers to the top with the following features: Allow for easy lift in and out, making filament changes easy. Keep the unit securely held in place when…
Mount 14 of your recip saw blades to Wall Control using this handy holder. Project includes the rest of the components required for a complete model using 2 of these mounts for a total of 28 blade capacity. See the base project for…
The OWON benchtop meters XDM1041 and XDM1241 are both nice units for benchtop work but could use some gridfinity lovin' so here we are. This model should fit the meter tightly such that it won't just lift out of place. To insert, start…
TTGO T-Beam v1.0 Enclosure This is an enclosure for the TTGO T-Beam with OLED version 1.0. All credit goes to the SoftRF project for the original design. Remixed features This enclosure has been generalized for use outside of the SoftRF…
2x 1y 5z gridfinity with 3 and 4 bins and embedded glass slide
Honeycomb Storage system wall panels that can attach to Wall Control pegboards using the DDD Wall Control system
I ran across the Gratkit Firefly filament dryer and it checked my boxes - reliably gets up to heat, actually dehumidifies filament per independent tests, and offered an interesting control solution that I can hook into Home Assistant. One…
This is a two-part model that works with the Desk Clamp (Modular) system. Model prints in two parts, one that connects to the clamp to hold the cables and another to keep them from falling out. Channels for the cables are 4.6mm wide such…
Snap-on fit magnetic bit and fastener holder for the DeWalt DCF850 impact or DCF870 hydraulic drivers. Bits are NOT firmly held, magnets hold the parts in place as you climb ladders etc but leave the bits freely accessible for one-handed…
Snap-on fit magnetic bit and fastener holder for the DeWalt DCF921 or DCF923 impact drivers. Bits are NOT firmly held, magnets hold the parts in place as you climb ladders etc but leave the bits freely accessible for one-handed use. Great…
Hold six 1/4" driver bits in the handle of the Williams WRS-1 ratcheting screwdriver . Remix of the great idea from johnzanussi , this re-work offers easier installation and removal of the driver bits while still maintaining a firm hold…
VESA mount for common DRO mounting arms This model provides a 100mm x 100mm VESA mount for common DRO mounting arms that have a 10mm mounting hole through a 20mm thick bar. Project page Please visit the project page for full details, BOM,…
Pixel 3 Phone Mount This is a USB-C charging base for the Pixel (non-XL) 3 phone. It is designed to be compatible with the Brodit ProClip line of custom car mounts . To use this, you'll need the following items: Brodit mount for your…
DDD Wall Control hanger set for the Crescent 3/8" Drive Pass-Thru X6 Tool Set CX6PT25 Everything you'll need to build a hanger for this tool set is included here. If you have a standard I3-sized print bed, rotate the 11x piece by 38° in…
DDD Wall Control + Klein Tool Ratcheting Driver and Flip Socket
I have a steel door with glass on either side and no wires run for a doorbell. The Ring Video Doorbell seemed a good fit, but my general issues with technology commitment (sorry Amazon, it's you not me) kept me from wanting to run screws…
This is a case designed for the LimeSDR version 1.4s Micro USB Type B board. This case has 12 x 6.5mm cutouts for SMA pigtails and embossed labels for each port. You'll need 4 x 6mm M3 screws and nuts to secure the board to the bottom, 4…
DDD Wall Control tool holders for PB Swiss SwissGrip drivers. Rainbow Slotted Screwdriver Set PB 8240.RB Slotted Screwdriver Set PB 8240 Rainbow Phillips Screwdriver Set PB 8242.RB Phillips Screwdriver Set PB 8242 Torx Screwdriver Set PB…
3D scanned holder to precisely fit the contours of the DC921 and DCF923 impact drivers for DDD Wall Control System
Simple adapter allowing a D27 FESTOOL hose to connect to DW 32mm taper fittings such as the plunge router base. Maybe.
Optrel air hose holder part number 4551.024 for the e3000 PAPR system I got a great deal on a like-new PAPR grinder hood from eBay but it was missing the hose clip. I picked up a matching welding hood that had the correct part, so I…
This collection of models provides hand guards and handles for tools like cold chisels, pin punches, center punches, etc that have hexagonal shanks in imperial dimensions. They are designed for printing with TPU and have no overhangs nor…
Soft Jaws for Wilton Tools 650P Vise Print in TPU and vary infill % to adjust overall stiffness. Unlike softwood soft jaws, TPU will never splinter and will return to its original shape after deforming when clamping irregular shaped…
Based on the Torch Wall model from the OpenForge project , use the negative STL in your slicer to cut out a spot for the battery holder, torch, access to the power switch, and a path for the wires to connect them. BOM CR2032 coin cells…
Soft Jaws for Rockler 9in Quick Release Workbench Vise Print in TPU and vary infill % to adjust overall stiffness. Unlike softwood soft jaws, TPU will never splinter and will return to its original shape after deforming when clamping…
Gridfinity base for the PB Swiss bitblock holder PB 990.Leer
MP Select Mini Gantry Support This is a remix of the support pylon for FDM_Guru 's excellent X Gantry Support System for the Monoprice Select Mini 3D printer. It appears that there are now variations in different releases of this printer,…
DDD Wall Control mounts for the Mitutoyo QuantuMike Series 293 micrometers. Includes all models required from the original project for a complete mounting solution. Currently, this includes: 0-1" Mitutoyo 293-185-30 1-2" Mitutoyo 293-186-30
BOM Gratkit Filament Dryer 2x M4x100mm Socket Head Cap bolts 2x M4x40mm Socket Head Cap bolts for the brace, optional The drybox will fit snug into the base part. Brace is optional and probably not necessary. It can be used if you have a…
Tool holder for the Wera 3/8" Zyklop Comfort Ratchet: https://amzn.to/4q0i4ud
Mini Ultra LoRaWAN Enclosure A 3D printable enclosure has been created to house the Rocket Scream Mini Ultra LoRaWAN device with pin headers and battery holder installed. The enclosure may need to be modified if additional…
Acer XZ321QU 31" Curved LCD Hat for 12mm LED Strip This comes in two parts with a dowel pin to connect them together. The model was too big to fit on the bed of my XL so I had to split it in two. The result is still too big for most…
These are all currently available results.
![MP Select Mini X Gantry Support + Camera Mount [Reinforced and Realigned]](https://media.printables.com/media/prints/104933/images/1050470_7bd50778-aa3e-40f4-a1fa-3073ec9c5961/aa03752483e09f37421c28265c134c55_display_large_10.jpg)
