Counting matching models…
I designed this case for an Arducam. I specificall used the B0200 camera ("Arducam 1080P Low Light WDR USB Camera Module for Computer, 2MP 1/2.8” CMOS IMX291 100 Degree Wide Angle Mini UVC Webcam Board with Microphone") Amazon / Arducam…
My laser cutter is up on risers for rotary engraving so I didn't feel like laser cutting the ruler, here's a 3D printable version of it.
I made this magnetic fume extraction setup for my xTool M1 hybrid laser and blade cutting machine. This makes it easier to move the machine around, and allows me to add a second fume extraction fan. I still wasn't satisfied with the…
I remixed "Amass XT60 enclosure mount" to fit better with the following improvements Made the hole for the front mount and front half of the connector 0.5mm larger in each dimension for easier fitting of male piece when connecting First…
I made these holders for our dish scrubbers at our apartment Note - the refillable soap one will only work with the replacement sponge heads, for some reason those are totally different than the first head that comes with the scrubber.…
I made these larger feet for the xTool M1 so that I could fit an air filter underneath the machine. I modelled them to have the same top and bottom diameter as the original feet so it should be a drop-in replacement. You can try to pry…
An adapter plate for mounting one piece of 4040 aluminum extrusion at a right angle to another piece to the side of the piece. I have a design where I can't just put the second piece vertically on the first piece, so I designed and…
It's a sign. Add a color change before the text starts.
I made a mounting device for the popular 3-core xConnect connector. This connector is commonly used for advanced Christmas light displays to music using xLights or similar software. You can see this Instructable I wrote about getting into…
The two files can be used separately or together. The first is a stackable lid or hat for the Meanwell LRS-350 power supply, mine is the 5V version but I think they're all the same body. It gives you a few cm of clearance from the power…
A model of a replacement ground stake for an outdoor volleyball boundary webbing such as "Park & Sun Sports Outdoor Volleyball Boundary Webbing with Ground Stakes". One of the originals broke so I modelled it, making the back part larger…
I designed this for my YESHOMY Height Adjustable Electric Standing Desk , the top measures 15.25mm thick. It lifts my Bose Companion 2 Series III speakers to be inline with my monitor, but mostly it just frees up a little visual desk…
A bottle holder for 6 essential oil bottles by O'Linear. The bottles are 25mm diameter. For extra flair you can add some rubber feet on the bottom and then it won't slide around and looks a bit more professional. Fusion 360 model…
A clamp to attach two ribbon cables for the Pi Camera together. The cable I had wasn't quite long enough, but I had another ribbon cable that would give it enough length. I laid the two ends on top of each other and used electrical tape…
Designed for these wheels: https://www.robotshop.com/en/60mm-mecanum-wheel-set-2x-left-2x-right.html "60mm Mecanum Wheel Set (2x Left, 2x Right)" from RobotShop RobotShop sells a 4mm adapter and a 6mm adapter for these wheels, but the…
A potentially overengineered solution to a broken can opener handle. I didn't trust plastic alone to spin the metal piece and not deform over time, so I used 8 M3 bolts to keep this part strong. Hardware Needed 6x 20mm M3 bolts. These Can…
I didn't like how other spool holders either required a specific spool width or required many different parts to print. This part prints in a single piece, then you use a heat gun to warm up the lids and push them down to be flat over the…
The new Unsouled badge design from the upcoming Cradle animated series based on the Cradle book series by Will Wight. I included various file types, and the source Fusion 360 files. The badge is 100mm wide, but you can scale it larger or…
A fun tray for Santa's Milk and Cookies! No MMU (multimaterial) necessary, just a few manual color changes or paint. It also has an optional orange carrot model you can place in the corner. Fun tray you can make in the comfort of your…
I made a version of my 3D printed magnetic fume extraction system that can be laser cut and uses a standard size of PVC pipe. These models are designed to use standard 2.0" or 2.5" PVC pipe from any hardware store. My google search says…
A vertical mount for the Falcon "4-String Differential SmartReceiver Board" from https://www.pixelcontroller.com/store/index.php?id_product=56&controller=product Use M3 bolts (short ones) to attach the smart receiver to the part. You can…
Simple panel-mount connector for the generic 2-pin, 3-pin, 4-pin, 5-pin, or 6-pin Big connectors by BTF-LIGHTING sold on Amazon here: https://www.amazon.com/gp/product/B01LCV8LVK/ They use the same outside shell for the 2-pin and the…
This is a remix of " PPD Geo Wreath Mount " but Thingiverse's Remix feature seems to be broken right now. I smoothed out all the sharp corners on the print for aesthetic purposes. From the original Thing: This is a mount for the Boscoyo…
I was really bummed that doorway pull up bars are sold out everywhere due to Covid-19 / quarantine, so I decided to make my own. It uses $20 of materials to make which is on par with similar bars on Amazon . I 3D modelled and printed some…
A replacement for the small, thin rubber gasket used in these waterproof ethernet glands from Amazon . The gland comes out easily and is easy to lose, I designed these to be printed in TPU or NinjaFlex to replace them. Anmbest 5PCS Panel…
I designed this NFC tag holder so that when I put my phone in the dashboard phone mount it will automatically open Spotify (using the iPhone Shortcuts app) and turn on my Bluetooth. The NFC tag is embedded in the print by doing a color…
I designed this middle extender piece so that I wouldn't have to reach as far to grab my headphones. I suspect the original design was for 4' tall cubes, my office has full ~6' tall cubes and it would be a stretch to reach headphones from…
A remix that deletes the bottom 0.4mm of the original lid so that you don't have to do any fancy things in the slicer before printing it. I recommend printing with supports on everything, it will look nicer than without supports.…
These are all currently available results.
