Counting matching models…
This is an old model I made and used for several pieces of furniture. It screws to the bottom of the leg or furniture to hold an M8 nut. An alternative design is to drill into wood to fit and hold the nut:…
This is a remix of flummer's battery box in order to use different battery contacts. The contacts I am using are available here for a quite reasonable price:…
Prints without support. Tolerance are quite large to allow the core to go through with minimal friction. The “pin” is quite tight. Rimming the whole with a 7mm drill bit might help. Prints without supports. Fun toy to play with. When…
Simple adjustable feet based on an M8 bolt and nut. I am using them for a table. The upper part fits into a 25mm hole drilled into the wood with a 25mm forstner bit. Printed in PLA. I printed the upper part with the "fuzzy skin" option in…
It turned out that one of the butterfly nut on the light stand I was fixing is actually M6. This is a customization / modification of the M5 version for a larger 10mm (M6) nut but keeping the nob identical. M4:…
No support needed. Just clean the hole with a 5mm drill bit or with a knife after printing.
The Skadis hooks and the drill hooks are printed separatly and glues to the base plate. I used some gel superglue and it seems plenty strong. Hooks are printed in "add:north X-PLA – Power Tool Lime Green" to match the ryobi color.
Looking for a bit holder, I liked many of them but did not find one that had exactly what I needed or that was easy to modify. So here is the one I made with FreeCAD. I was planning for a really nice modular and parametric model in…
I exported a "strait" option that allows mounting the ventilation duct in line with the fan if you need that. The “side” version is the one I used to extract air from a cabinet as shown on the pictures. The cabinet is used a cat litter…
This is a parametric design. I uploaded a set of sizes as a starting point but let me know if you need other sizes. In all 3 dimensions, the boxes can be sized in increments of 20mm. I printed the boxes with a Marble PLA filament using a…
Printed in PLA. The hooks need some support to print correctly. The drill holder shown on the picture is here: https://www.printables.com/model/1380191-skadis-holder-for-ryobi-drill-and-bits
Standard 370 motor has a length of 30.5mm a diameter of 24mm. Printed in PLA with whatever default settings. The motor is held with zip ties to the mount. That ensures that there is no play. The mount is attached to the pedal with 2 M3…
In the same series as my M5 and M6 but smaller :-) M4: https://www.printables.com/model/1343661-butterfly-nut-for-m4 M5: https://www.printables.com/model/1293990-butterfly-nuts-for-m5 M6:…
Prints without support. The M8 bolt press-fits in the ball part. The ball part can be pressed in the foot. Can be used as an option with those two alternative adjustable feet:…
Designed for protect the feet of a garden table standing in the grass. The plastic feet have holes to drain any water out and keep the wood dry. The model is parametric…. for the most part :-). If you need a specific size leave a comment…
Small power supply based on a cheap DC-DC converter and a USB PD module. Runs from any USB-C PD power brick. The 20V from the USB PD powers the DC-DC module as well as a barel jack which I amn using to power my soldering irone (TS-100).…
This is an alternate door for the GoPro Hero 8 which allow connecting the USB-C charging cable for operating the camera with an external power source. Typically long timelapses or long drives, etc. It is similar to the ULANZI G8-7 GoPro 8…
Here is a simple parametric project enclosure. I am using this design for generating boxes of the exact size I need. I add the holes, mounts and stuff needed for the specific projects by importing the box in openscad. You can see a few…
Printed some in PLA, PETG and TPU. No support is needed: There is thin “plug” in the hole that acts as support for the hexagon. It is easily removed by hand with an 8mm bit or a knife.
Model has a flat for easy printing. Fits well for 7mm holes and seem to bond quite well using wood glue.
Fits nicely to organise small parts. I used many for both small screws and electronic components. The inside of the insert is "rounded" to make it easy to pickup parts.
Untested as I do not own a Streamdeck XL I designed around this model of the Streamdeck XL: https://www.printables.com/model/790772-stream-deck-xl Give it a try and provide your feedback!
This is a simple modification of the "M3 double nut thumbwheel" by jpaandu to make a replacement part for a swimming pool cover. Perfect! The black part on the second photo is the original part. If you need a similar part, the SCAD file…
Printed in PLA, 0,4mm nozzle, 0.2mm layers and support for the hooks. I chose to go with simple hooks to be able to easily move the holder on the SKADIS board. Seems plenty strong with the 3 hooks.
Printed in PLA. Fits well and mixes well with original inserts.
I like this size of boxes. You can fit a lot of them on shelves to use the depth of the shelves efficently. To organize the inside of the boxes there is only one size of inserts so I made a parametric model to use as much of the volume…
Learning the basics of Freecad and playing with vase mode. I am printing it with a 0.8mm nozzle for more strength but it can be printed with a standard 0.4 nozzle as well. Make sure you pick the correct lid. Sliced with OrcaSlicer with…
This is a replacement pulley for the IKEA TUPPLUR blinds. The pulley mounts on the wall and support the 'chain' used to roll and unroll the blinds. This is as close to the original design as I dared to get in order for the replacement one…
It is similar to many other models but I had fun designing the brackets to fit my wall. The 2 sides of the Ikea rod have different diameters. I made the bracket with the larger diameter and the "spacer" slides in the bracket to reduce the…
We needed to mount some cameras in corners so this bracket replaces the default mounting bracket which monts flush to a wall or ceilling and allow bolting the camera and dome directly to it using the stock bolts. Printed in PETG for extra…
I have been using that design for a while to have different size tables easy to put up and store. The table legs have a slot to slide in and out of the clamp. This allows putting and removing the legs without having to take the bolt/nut…
This was a repair for my specific chair. I modelled the shape for the leg and designed a drilling guide to drill 8mm holes strait into the wood. The thredead rod is embedded about 6cm in the wooden leg. The body of the foot is printed in…
These are all currently available results.
