Counting matching models…
1:64 scale cinder block (3x6 MM) and cinder block wall portions for building 1/64 scale dioramas and useful for stop-motion filming set builds. Print vertically and sand some of the layer lines out to give the authentic cinder block look.…
Dual gauge pod/mount for VDO 52mm (2") 15 degree tilt up & 15 degree to left (towards driver-LHD) may fit other gauges of same size/shape Category: Automotive
Decided to model a glass on glass (joint) clip for my Grav Labs 14mm reclaimer adapter so I would have a spare or two. Instructions raft and support recommended. printed @ 0.20mm, 2 perimeter shells and 40% infill Category: Other
Print with glow in the dark filament, add some double sticky tape to the back side and stick on your walls and ceiling for a spaced out look! Category: Decor
ESP8266 + BME280 enclosure with quick-slide mounting base and printable board lock for a tool free installation (not including a screw or two for the enclosure mount). I flipped the ESP8266 board inside the enclosure so the chips were…
Just a simple replacement bracket for the NZXT H440 case. I saw that someone was needing one over on Reddit/hardwareswap and I have an H440 readily available so I figured it would be great practice modeling plus it is always nice to add…
I was having issues with the original so I imported into Sketchup and cleaned up the model. Printing much better now! Thanks for the sweet file mate, printing for a reddit rematch gift ;) 19JAN15- added a second .stl file with enlarged…
Remixed from http://www.thingiverse.com/thing:40297 as a couple dimensions were off a tad for my Coolermaster HAF 922 case. (I was able to get this one to fit after cutting off some tabs and opening a couple areas with a file. Also added…
I needed to stack 4x SSD's for my recent server upgrade Category: Computer
Customized version of http://www.thingiverse.com/thing:1393686 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1393686 Instructions Using the following options: rod_play = 0 wall_thickness = 4 rounding = 6…
Single and triple fin styles! Plenty of room for advertising too. *Updated the hole diameter (now radius of 1.8mm) and added .8mm to the thickness of the board itself plus lengthened the fins for a better look. Printing another set and…
Drawbot (XY Plotter) X-Axis Carriage & Pen Lift Mechanism (Linear Actuator) more info here soon I used the servo gear and "rack" gear elements from artichoke's "Linear actuator for mini servo (11-20gr)" design found here…
Designed during my twitch live stream using sketchup for a viewer! Category: Containers
Corsair H100i AMD CPU socket adapter. AM3 & AM4 *use Intel hardware for mounting (thumb-nuts, standoffs and screws) 28OCT18- Updated the design to allow for the Corsair Link cable to be plugged into the pump...my earlier revision did not…
Customized version of http://www.thingiverse.com/thing:1393686 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1393686 Instructions Using the following options: rod_play = 0.2 rounding = 6 rod_h = 50…
Raised feet for my Coolermaster HAF 922 PC case. The need for raised feet arose after I installed a cooling fan on the inside bottom of the PC case. The stock feet provided very little airflow especially when the case is placed on carpet.…
Print 4 holders and place up to 2 frames of the same size for storage or curing/drying. Category: Art Tools
I am upgrading from factory type plug wires to a race style which are much beefier than stock (factory) wires in my VW. So instead of using some zip ties I decided to model the #2, #3 and #4 spark plug wire looms we have all seen in our…
A simple, model airplane...low-wing, tail-dragger style (aerobatics style?) Inspired by a recent printing job Propeller and wheels spin/rotate Category: Vehicles
I decided to add a keychain ring for this sweet "love oregon" model Soon to post my makes of the original Oregon with heart models...been painting for days! Category: Keychains
90T MXL Pulley w/ 4mm shaft diameter for Makeblock eggbot (and other Makeblock bots) Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627…
18T MXL Pulley for 4mm shaft Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options:…
UPDATE 18DEC13: Tried printing the arm but the end part did not print so well. Another quick mod in Sketchup and it should print better/easier now. UPDATE 17DEC13: Okay, so originally I was just hoping to just offer a quick .stl with my…
Makeblock Drawbot (XY Plotter) Pen Holder revision 2 (more info here soon) Category: Art Tools
YouTube logo for adding to your design/s I fixed the original upload as there were a couple parts of the B and E in that needed to be raised. Adding a key-chain version soon (added 27APR2020) The original file was designed by Tanjoodo…
A 3d printable version of the lathe tool height setter gauge found at https://littlemachineshop.com Quickly and easily check and adjust lathe tool bit height (adjust to center) Accepts any diameter work piece from 1/8" to 2 1/2" Use a…
Filament Spool Holder - OpenBuilds V-slot will fit 25mm spool diameter (ID) Print Settings Rafts: Doesn't Matter Notes: supports only needed for version with corner Category: 3D Printer Accessories
90T MXL Pulley w/ 5mm shaft diameter for Makeblock eggbot (and other Makeblock bots) Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627…
ESP8266 + DHT22 Enclosure with quick-slide mounting base Category: Electronics
I really liked the original design but I wanted to speed up the print with the rounded corners and I added a peg for hanging my scraper. Thanks to basnettd1 for the original upload in which my design/remix is based. Happy printing! Print…
Just a simple remix for easier printing and proper fitment on my FFCP and/or Dup4 printers. May fit other Makerbot clones Category: 3D Printer Parts
Customized version of http://www.thingiverse.com/thing:44579 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44579 Instructions Using the following options: x_hinge = 23 T = 1.6 H = 25 W = 35 L = 40 nub =…
3DP XL Spherebot Fully 3D printed (bolt and/or glue together) Extra Large Eggbot/Spherebot Files for a standard size version are included. 5mm and 4mm shaft options...comment below if you desire a different shaft diameter for the driver…
updated design as per request (even if late) :( Will be working on another version that allows the stand to clip on to yjr top, back of your monitor to help clear the clutter on your desk. The trick for that version will be to make the…
PC Case feet for use on carpeted floors to gain clearance for the bottom intakes which is very important for bottom mounted PSU style cases. Designed for use with 4mm screws Print Settings Supports: Yes Category: Computer
Lens hood for the Vivitar 43mm wide angle lens 65mm opening https://www.amazon.com/gp/product/B007OX85V2/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=schwing06-20&linkId=ee53f15c16a5c21f8c84f5ce8cd1c0b5 Category: Camera
My brother requested a print of the Herakles bust so I decided to go BIG! I took the original model and loaded it into Netfabb (PC client) and cut the file into sections. A total of 45 parts but I omitted two blocks which were void of any…
Customized version of http://www.thingiverse.com/thing:93859 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=93859 Instructions Using the following options: hole = 4 text = 420 Category: Hand Tools
The tiny rubber feet that came on my Antec LANBoy AIr PC case were too short to allow good/proper airflow to the bottom of the case where the PSU intake is so I designed these feet to match the Antec LBA case styling. At approx 40mm…
TTB-3d MK-5 Extruder Carriage for Flashforge Creator Pro and Duplicator4 printers (and similar style printers as well) I really liked the overall design by FrankenForge but wanted to clean it up and add my own touch. I have yet to print…
Enlarged the pin holes to 2mm diameter so no post-processing required to fit the 1.75mm filament as a hinge pin. 96 point circles were used instead of the default 24 point circles in sketchup for better printing and detail. Also made the…
Customized version of http://www.thingiverse.com/thing:340321 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=340321 Instructions Using the following options: Name = DANNY BlockLength = 4 BlockWidth = 2…
A collection of files associated with the Rubicon 3D Scanner that was launched/funded on Kickstarter and Indiegogo. This is not my design, I was a backer on Indiegogo and in hopes to preserve any files associated with this scanner so that…
Awhile back I bought a set of casters in hopes to fit my bakers rack. I did not test fit the casters when they arrived (or within the return period) as I was unable to fully access the rack. When I finally got around to this..I found the…
I plan on displaying some bigger GPU's such as the HD5970 dual-GPU graphics card so I decided to beef up the original version of this stand. Plus I added a couple screw holes for mounting to a surface for a more secure/permanent…
3DP MakeBlock XYP (plotter/drawbot) full upgrade. http://www.makeblock.cc/xy-plotter-robot-kit/ I wasn't happy with the carriage design of the MakeBlock XY Plotter (drawbot) so I took it upon myself to redesign the X & Y axis carriages…
Peace, Love, Happiness stylized incense holder with Yin-Yang in center Category: Containers
Drill guides/jigs for 1/8-NPT nut and 90-degree elbow/adapter (Easy-Install High-Pressure Brass Threaded Pipe Fittings found here https://www.mcmaster.com/#5021t52/=15ye4tm ) I cut the end of my elbow off for clearance reasons but the…
A pair of bearing adapters to fit the Volkswagen Type 3 engine crank pulley for balancing purposes Category: Automotive
A muffler for your piezo buzzer. Signifigantly drops the decibels of the piezo buzzer output when stuffed with foam. Needs minor adjustment to ID of circle opening for a closer fitment. I needed to wrap my piezo in tape to get the proper…
My nephew needed a pair of risers for his new board. I took it upon myself to design this pair of risers to hold a guitar pick (and jazz guitar pick) so he would always have one handy as he is always jamming out. I used the Guitar Pick…
Gluten Free Zone keychain Category: Keychains
single sided keychain more here soon Category: Keychains
Just a simple long reach tool that holds a standard 2-pin 2.54mm jumper cap. Category: Computer
I ran the key through Netfabb and cut the key in half for easier printing. Cheers! Category: Containers
I needed a universal joint for the trolling motor tiller handle extension and was unable to find one on thingiverse in a hurry so I remodeled the u-joint design found in the awesome kayak rudder setup published by @LoboCNC. I want to…
I found the v2 of this remix source weak near where the belt grips the bracket. I beefed up that area and also added .5mm to the thickness of the bracket without changing the dimensions of where the bracket mounts to the hub rings. Also…
v4 Makeblock XY Plotter feet (drawbot) no longer require the metal plate for mounting to the XY plotter frame. Plus these are adjustable height. For use with M3 nuts so the bot may be secured to a platform (2' x 2' MDF wood in my case)…
Make a simple enclosure for your FFCP printer to help reduce noise output and help retain heat generated by the HBP and hotend. A filter can be fitted to the enclosure to help eliminate odors caused by various filaments during printing.…
Feet for the Makeblock drawbot (XY plotter) for use with 3mm t-nuts so the bot may be secured to a platform (2' x 2' MDF wood in my case) the bot can be stored on the wall plus I plan a few mods for my Makeblock drawbot (xy plotter) I…
A holder for #3 size peat pots (found @Home Depot and other garden supply stores). This holder will hold 2 #3 size peat pots and holds a small amount of water which can flow from one side to the other. There is also a port for adding more…
Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: pane_size = large include_hole = no text_size =…
Just a basic remix of @3DWorkhorse's hight foot so I could raise my Duplicator 4 printer enough to provide proper space for the 120mm fan I am installing on the PSU to replace the tired 60mm screamer! Should fit ALL wood/acryllic Makerbot…
Just a simple remix to allow for use wit 6x3mm magnets. I made the pieces a bit thicker plus I changed the hinge pin diameter to 3mm (3.4mm) so either a piece of 3mm filament or a 3mm bolt/nut can be used to secure the two halves…
I have a rack of filament spools mounted above my printer and after recently restoring my Tunell Filament Monitor to working function )one of the tensioner arms broke awhile back), I needed something to guide the filament to the rear…
This is a remix...I just need to find the source on Thingiverse and give credit. I did my mods to this back in December 2016. Still needs fine tuning but I did successfully print flex filament a time or two with this drive block.…
A 3D printed model rocket launch pad built to last! With an adjustable leg for leveling and/or aiming your rocket into the wind. Designed for use with standard 1/8" or 3/16" (Maxi) sized rod for fun with ALL sized rockets. Very little…
Small, medium and large sized cleats for small boats (canoe, kayak etc) or for use around the house/shop. pics coming soon Category: Hobby
Mount set for the Tunel Filament monitor found here... http://www.toybuilderlabs.com/collections/best-selling/products/tunell-3d-printer-filament-monitor?variant=963597848 I rounded a few corners on the main brackets and made the back…
Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: text_vertical_position = 0 picture_orientation =…
Keep your vapor pens/accessories in one convenient location. Included is a spot for your Slick Ball too. Whoops! Holes are undersized...back to the drawing board! Inspired by http://www.thingiverse.com/thing:118146 Instructions Recommend…
A simple microphone/camera holder end-cap to replace the factory plastic end-cap on the "VIVO Dual VESA Bracket Adapter | Horizontal Assembly Mount for 2 Monitor Screens up to 27 inches (MOUNT-VW02A)" I still need to make one more change…
I was tired of looking at my freshly rebuilt Dellorto FRD 34B carbs collecting dust as they wait for the engine to be completed so I busted out my trusty measuring tool and designed this cap with a quickness. Enjoy! Category: Automotive
Dual Pico Hotend Carirage Adapter designed for the Flashforge Creator Pro & Duplicator 4 3D printers but should also fit Replicator and other Replicator clone printers. teaser pic here.. https://www.instagram.com/p/BOyXomyjB_Z/ UPDATE:…
Ditch to PITA Teflon tube style spacers with a pair of these 1-piece spacers. I tried the Flashforge spacers for my Dup4 but they did not fit my extruder heatsinks so I modified the design to accommodate the Wanhao Duplicator 4 printers.…
Now, with a little work you can add your name to this sweet Nokia 521 phone stand! Just download the model and import into your favorite 3d modeling program and add some letters. Export, slice, print and enjoy! Category: Mobile Phone
Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: include_hole = no text_vertical_position = 0…
Customized version of http://www.thingiverse.com/thing:162641 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=162641 Instructions Using the following options: open_bottom = yes select_eyes = oval_eyes…
Not too many changes from the original design by krid. I did add a mech. mod chip bay for those wanting to go that route. Category: DIY
Please visit http://www.myminifactory.com/object/view/624/Seasons-Greetings-Ornament and download a copy of this model if you really enjoyed it. Thanks! Seasonal ornament designed for this years www.MyMiniFactory.com winter holiday 3d…
Snapfit Y-Axis Motor Cable Chain Mount (FFCP, Dup4) (tool-less) I still haven't found the X-Axis cable chain mount I like but I modeled this recently and it fits very well, without tools. Insert an M3 nut and use an M3 bolt to remove the…
FlashForge Creator Pro - SD Card Cover keep junk from getting in the hole Add another file (before slicing) and position it above the card cover file for a different look! Do not print FFCP-SD_cc_assy.stl as it is only for assembly…
Prevent accidental switching of your electronic device. I was constantly toggling the rocker switch on my electronic device so I designed this cover to prevent switching on/off when not desired. The cover works as-is but I plan on making…
Bulb style tree ornament with "Happy Holiday's 2014" on the face with integrated holder hoop. Instructions Best printed @0.10mm layer height with support on a raft. Though 0.20mm will work, the quality is much better at the higher…
Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: include_hole = no text_reverse = no…
Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: image_file =…
I printed the original files from the Action Chess and since I was only using a max infill of 50% the Knights were a little weak near the "ball joint" area. Everytime I would insert a pawn, the Knight would break. On the pawns, I noticed…
Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: layer_height = .15 hole_diameter = 6…
Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: image_file = lithopane20131210-1047-d3p39m-0.dat…
A Luna's Puppets artwork turned litho. Check out Luna's Puppets @ http://www.lunaspuppets.com/ Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer!…
Duplicator 4 OHSH XW Lock-down and Filament Guide I was tired of my spools unwinding during a print and causing the filament to bind from behind the spool holder mount so I whipped up these lock-down/guides for the Dup4. Category: 3D…
Just modified Rev.3 a bit more as I was making an extra wide version for use with my extra wide OHSH. Added gusset, changed the dimensions a tad for better fitment. Keep your OHSH from falling or being pulled from it's perch! Enjoy! note:…
25mm post diameter for those smaller spools. Peace symbol incorporated for looks. Revision 2 posted. Instructions Print 2 of these. (Top pieces) Print 2 of http://www.thingiverse.com/thing:189571 or http://www.thingiverse.com/thing:12974…
Remixed from http://www.thingiverse.com/thing:12974 as the Dup4 is close to the Replicator 1 but it varies enough to require a slight rework. Revision 2 allows for easier attachment and better fitment with the added relief. Removed older…
Added support gussets and made the cross bar opening a tad bigger. Orientated horizontally for ease of printing. Both left and right parts can be printed at the same time. Thanks for the holder!!! I will be adding provisions for tool…
These are all currently available results.
