Counting matching models…
This extension was designed to move the camera outward from a helmet chin mount. It allows the camera to be tilted to a position more consistent with the rider's point of view. There are no special instructions for printing.
This key cap is designed to fit cherry mx type keyboards. It has been tested and fits a generic keyboard as well as a razer keyboard. For best effect, print in transparent and paint masking your legend and the outer ring to allow RGB pass…
This is a caddy I designed to hold two drives for an HP ProDesk 600 GT which I purchased without the original part. It connects with the original locking mechanism and holds securely in place. You will want small (possibly set type)…
This bracket was designed to quickly convert 1 inch PVC pipes into a towel rack of whatever length you would like. I have tested this with lengths up to 2 feet and it works well. Your mileage may very with longer pipes as PVC is a very…
This case is designed to be printed in two different materials. There is an inner liner designed to be printed in a soft medium. I used TPU, bit I expect expanding filament would also work well. There is an outer shell which should be…
This should be an easy print in the material of your choice. The model I have included has no call sign. You may add your own, or contact me for a model with yours. Align the back section of the model with your build plate. Depending on…
This is a plug designed to fit between the cap and your low point drain. It should be printed in TPU or similarly flexible material. This should allow you to close your drain point without using excessive pressure and additional…
This model is designed to hold the round insect screens in place over your heater vent without having to use the frustrating little spring clips. Materials: Choose a heat, UV, and chemical resistant material. Tested with PETG.…
I have provided both the combined design and split so you can print in a single material or color or different colors or materials. Print scaled to 50% to get correct dimensions
This model is pretty straight forward. Put the flat side of the ‘fence’ toward your build plate. Do the same with your posts. Supports may or may not be needed depending on how well your printer handles overhangs. There are four screw…
This is designed to replace the AC plug cover on a GeoPro 15TB. It will likely work with other GeoPro models and will work with any other RV using the same style of connector. You will also need 2 M3 screws around 10mm long. A round end…
These are all currently available results.
