Counting matching models…
Best effort attempt at recreating an Owala water bottle model. I used the specs from the website and my own bottle. Updates: A huge thank you to everyone ( @Hondaman74_265897, @EmilyTaylor_3024203 , @Agne_2844318 , @Dieselmh_2984182 ) who…
Best effort attempt at recreating an Owala water bottle model now with color changes. I used the specs from the website and my own bottle. I've successfully printed the lid base and bottle models but don't have a nice camera setup to take…
An updated print method for the original Owala Lid Model . Bottles 32oz Bottle 24oz Bottle Updates: Thank you Nathan_1472019 for helping review this model pre-launch! This Lid has been updated with new threads which fixes thread splitting…
UPDATE: I found that the “nubby” sphere broke too easily when dropped, so I included a few updated STLs with thicker walls. I also discovered how much fun “fuzzy skin” is, so I included a new smooth texture sphere which can be sliced with…
1. Reinforced Hair Dryer Mount: Infill of 50% No Supports 6 perimeter shell layers I recommend getting some sticky felt and adding it to the top of the whole mount along with the interior side and bottom of the small arm to prevent…
No MMU/AMS needed. Schedule color changes just before/after the front and back faces or use the included beads.3mf file which has them pre-set. 15% infill No Supports 0.2 Layer Height Diameter of hole is 0.15in or 3.81mm. If you'd like to…
Basic Base: 100% infill No Supports PETG preferred, I found PLA to break easily Layer Height 0.2 Enamel Pin Base: 90% infill No Supports PETG preferred Layer Height 0.2 Brooch Pin Base: 90% infill No Supports PETG preferred Layer Height…
UPDATE: Multicolor file now available. To use the STL, break the object into multiple parts in PrusaSlicer or load in the 3mf file. An ergonomic duck puck shaped scraper to help remove calibration dots and stubborn prints from the bed.…
A simple U channel for routing cables which can be mounted to the underside of a desk. Each piece is interlocking to create a chain of the 8.6in long, 1.5in diameter tubes. Side walls are 0.25in thickness. Printer: Prusa MK4 Layer Height:…
Plants: There are 5 different sprouts to spruce up your life: Fern, ZZ Plant, Seaweed, Money Plant, and Grass. Orient each plant so that it prints flat on the print bed. Infill 15% No Supports Layer height doesn't matter Once it's done,…
Best effort attempt at recreating an Owala water bottle model. I have successfully printed this model, I just don't have any nice photos if anyone wants to help out by posting pics of your make. :) Also see: MMU/AMS Remix 100% scale is…
Print Instructions: 15% infill Supports: Yes 0.2 Layer Height If printing with MMU/AMS, print the duck and the hat separately. They will need to be glued together after assembling the propeller. Assembly Instructions: If you've printed…
Printed with Ninjatek Cheetah TPU (This filament is magic, totally worth the price.) 15% infill No Supports 0.2 Layer Height Belt Bag: After it's done printing, slip an Xacto knife into the gap and cut the sides to enlarge the size of the…
Spherical magnetic fidget toys inspired by acupuncture massage balls. There are 2 new textures - dimpled hearts and bumpy hearts. See the 5 original textures here . Print the two pieces of each sphere, insert the magnet after printing,…
The Dyson Reinforced Hair Dryer Mount now remixed with MatthewWaters_464803 's model with mounting screw holes. Reinforced Hair Dryer Mount with Mounting Screw Holes Infill of 50% No Supports 6 perimeter shell layers I recommend getting…
Quick and easy print. I used NinjaTek Cheetah TPU which does a great job gripping the rubber cap with a nice tight friction fit. However, TPU is a tad bit sticky and the lower ring has slightly more friction when closing the lid causing…
This is a Scrubber Ducky the Print Bed Scraper Duck Puck accessory. This bubble bath nest sits snugly on the right Z axis support tower of a Prusa MK4/S. 15% infill Supports Everywhere 0.2 Layer Height is what I used but 0.15 may look…
Use this pipe sleeve and cable router in combination with all other plant pieces (tongue, teeth, pringles pipe topper, spots, and original gums) here: https://www.printables.com/model/502103-piranha-plant-piggy-bank-lid to create a Mario…
See the rest of the collection here: Print Instructions: 60% infill No Supports. 0.2 Layer Height 4-6 Perimeter layers Filament Polymaker HT-PLA-GF - Color: Tool Red Note you must have a hardened nozzle to print with GF Tool…
Tested with the 40mm Garmin Vivomove Trend watch, but might work for other 40mm Garmin watches as well, depending on the button placement. The fit is very snug and surprisingly clings on very well without additional straps. This was…
Check out the updated adorable duck version here: https://www.printables.com/model/1086950-scrubber-ducky-the-print-bed-scraper-duck-puck Quick and easy little print. 15% infill No supports Recommend 4-6 perimeter shell layers which…
Quick and simple little print. Diameter of hole is 0.15in or 3.81mm. To enable multiple colors, schedule a color change just after the first face and before the last logo face or use the included 3mf file. 15% infill No Supports 0.2 Layer…
Quick and easy little print. Infill doesn't matter. Set perimeters to 8 layers. No Supports 0.2 Layer Height If you'd like to remix this model here is the OnShape link.
Ergonomic sleeve for the RunLessWire Click for Philips Hue Self Powered & Wireless Smart Dimming Switch. For more info on this switch see: https://www.amazon.com/White-Philips-RunLessWire-Compatible-Assistant/dp/B07MMWH2YB There is a…
Print Instructions: 15% infill Supports: Yes 0.2 Layer Height I recommend adding a brim for the head and teeth. Assembly Instructions: Check out the original post for gluing instructions . It was a bit hard to figure out where the spots…
These are all currently available results.
