Counting matching models…
The original mount relied on a machined effector plate to fit an original e3d hot end, but this resulted in a 4 mm gap between the housing and radiator, when used with stock radiator. Also, I removed the nut pocket for the radiator. It…
Thickened the side walls that hold the hygrometer. The one I printed with the latest Bambu Studio had no side walls until I checked “Detect thin walls”, but it still fell apart before I could assemble it. Also added a ledge so it snaps in.
This is a case for the MKS Pi touch screen with hinge for mounting to extrusion. I created this to add KlipperScreen to my SuperRacer, which has the Pi in the top, using this mount . You can mount it to the frame with a 2 or 3 M3 screws…
Removed front emblem. Added reinforcements to sides of both backs to prevent flexing. Added new flap design with coarser slots. Moved the OTG and SD slots 1.5 mm for better appearance. Also moved these parts on the PCB. Larger screw holes…
I remixed CdnReprap's awesome Pi case (Pi 2/3) to add a broader base, a 4010 cooling fan, and updated it for the Raspberry Pi 4b I use for OctoPrint, but especially OctoScreen. This is one for the Raspberry Pi Touch Screen, and may not…
Remixed to make the mount stronger, but also to use with the Lisen Magsafe Car Mount Wireless 15W Charger Print two of the mounts from Josh Johnson's iPhone mount, but use my ring file to hold the slightly larger Lisen mount. I chose this…
Remixed for this LANMU Micro SD to SD Card Extension Cable Adapter from Amazon . Fits snug so shouldn't need anything to hold it in. Fasten with #5 hardware or smaller to your printer's rail. Like my work? Post a make! Print Settings…
Please read before printing. Prints fine, and print is centered. You'll need to use the included effector spacers at both ends of the rods. At the effector end to prevent the fan from hitting the rods and at the top of the rods to keep…
I couldn't get ArketypeDesign's Extruder Side Mount Rev1 , which was designed for a Bondtech extruder, to work with my stock Titan extruder, and wasn't ready to purchase a Bondtech extruder when I still hadn't seen a satisfying print (due…
There's a newer, MUCH better version available, based on my v2 SR mount . FLSUN QQS-Pro Sherpa/Orbiter Housing I had trouble leveling the bed after adding a Volcano hot end to my Flsun QQ-S Pro with Foxies firmware with the head stopping…
Chamberlain wanted me to use double-stick foam to mount this to my garage door... I don't think so. Disappointed that no-one created one yet, so here you go. I added a ridge around the top and bottom to secure with a tie wrap, should it…
I love the idea of using a piece of silicone, instead of a wire brush, to keep my nozzles clean, especially when I have a silicone sock on my extruder. But I haven't used a purge bin since adding custom extruders to my Pro. For stock…
This is a case for the official Pi touch screen with hinge for mounting to extrusion. I created this to add KlipperScreen to my SuperRacer, which has the Pi in the top, using this mount . You can mount it to the frame with a 2 or 3 M3…
This is a mount I created for my FLSUN SuperRacer for a 100 mm long 24v LED strip. You can use an strip, up to 10 mm wide. I have a print-in-place hinged version (that swings out) and one that's solid. Except for the hinge, both versions…
Nissenko's awesome V3 duct was a little too tall and little tight snapping under the screws of my SuperRacer with Volcano hot end. Still, I love the design and thought it was perfect for my dual 5015 fans. Adjusted the height shorter so…
Wanted a way to secure my cable so created this. Make sure you install this at least half-way up and that your PTFE hose doesn't snag on it. Print Settings Printer: FLSUN QQ-S Pro Rafts: No Supports: No Resolution: 200 Infill: 38…
This is not really a remix, but more of an adapter to work with Walker56's extruder mount. Walker's mount is intended for the Voron M4 extruder, and I prefer to work with a BMG-clone extruder. You'll want his longer mount. This mount also…
I had y-axis issues with my i3 Mega that were fixed by Todd Lowe's tensioner , so when I had similar trouble with my Artist-D and the y-axis was so similar, it seemed like a good place to go. I was half-way done designing it from scratch…
This is a part-cooling fan duct for my BMG Aero mount for JGMaker Artist-D AND the BMG Aero Ender-3 / CR-10 mount by Adolf_Muffin that my extruder mount was remixed from. Both were generous enough to post their step files or my things…
Inspired by Uhlala's FLSun QQ-S Led Strip , but that was too narrow for my led strip and didn't have mounting holes, so I whipped up a new one. I don't know why you'd need this much light, so populate as many sides as you need. I started…
Remixed to allow two fans to cool both boards with Michael's (Teaching Tech) Raspberry Pi mount / mainboard spacer . This allows you to have two 80 mm fans, one for your main board and one for your Pi. I used WINSINN DC 80mm Fan 24V 8015…
Loved the idea of a puck light for my SuperRacer, but hated the glare. This shield lets you work with the light on, but without the glare. I used this 24v puck light and this Rocker Switch from Amazon . Update 12/12/2021: Added taller,…
If you relocate your extruder closer to the hot end, do want a big gaping hole? Heck no! This will fill the hole and possibly you can use it to mount things, like a light switch or who knows what. Step file available on request. Note:…
I remixed Adolph_Muffin's BMG Aero extruder mount to fit the JGMaker Artist-D IDEX printer, well known for under-extruding. This mount will work with a cheap Bondtech BMG extruder as well. So no need to pay $65 per extruder for the Winds.…
FLSUN Deltas are notorious for extruder noise. This mod is intended to work with the thick metal (stock) extruder mount, either in it's stock position or when relocated to the side like the SR delta. I would assume most, if not all FLSUN…
Trying to level your lowered Tesla? Here's a fun tool to tell you how even the wheel spacing is on your Tesla. Although you can probably use this tool without it, having a spare wheel cover to steal the spring wire from, helps hold it in…
LED mount for FLSUN SuperRacer to mount a 8 or 10 mm wide LED strip behind the hot end. Slots are included for wire tying the strip, since adhesives aren't great in warm places. Be careful what LED strips you buy. You want one that is 55…
This is a mosfet holder for the JGMaker Artist-D or Artist-D Pro printer. You'll need 3 mosfet boards (4.5 cm x 7 cm) and screws to secure them. The boards I've linked to below come in 2 packs. Possibly other brands may work as well. The…
I loved MatGyver85's optical limit switches, but had trouble getting one of mine to trigger, so I remixed his flags to be one mm taller, so will trigger one mm sooner and you'll lose 1mm of print height. These endstops worked great, but I…
This is a remix of Perinski's awesome Led Light for BMG Aero Extruder. I found it didn't fit my Mellow Aero Winds and wanted to use a low power light strip I already had on hand. If you have left and right aeros, the aero mount should…
These are all currently available results.
