Counting matching models…
A simple, articulated duck made using the tools here: https://www.thingiverse.com/thing:2840744 https://www.thingiverse.com/thing:2135142 No rafts, no supports. Make sure your printer is calibrated well, especially in terms of extrusion…
A simple pair of brackets to snugly hold a glove box using the honeycomb storage wall (HSW). Can be mounted vertically or horizontally. Brackets come with integrated hex plug for directly inserting into the HSW. Internal dimensions of the…
This is a replacement toilet flapper. The lower bulb is roughly 40 mm diameter at its widest part x 32 mm long. The top "brim" is about 100 mm diameter x 12 mm high. The "fins" in the back extend about 50 mm away from the brim. I printed…
Can print this “standing up” with tree supports for the pegs.
This is a shim for door hinges, which allow you to increase the distance between the door frame and the actual hinge. This helped me level the door, so that it would close and lock properly. The shim is 2 mm thick, which you can obviously…
Certain slim/key sized USB flash drives are prone to the metal casing bending and "bowing" in. I created this end-cap in an effort to reduce the chances of my Kingston DataTraveler SE9 Gen2 drive caving in. There are two versions: SHORT -…
This is a Dolphin Snowflake Ornament. You can scale to any size you like, but I found 120 mm diameter to work well for my tree! Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,2 Infill: 15%…
Print vertically with the rake prongs vertical along the Z-axis, pointing up. No supports should be needed. I modeled it after a real product made out of metal which costs over $100 USD.
I just discovered the joy of extruder motor indicators, and decided to make one myself! You will need to glue a 8x3mm magnet onto the smooth, flat side of the print. v1 - more industrial, sharp lines v2 - chamfered for that refined look…
This is a hose clamp that can accomodate up to a 5mm diameter aquarium hose. It will allow you to control the flow of water so that you can “drip” water into a container to slowly acclimate new livestock to the conditions of your…
This is a simple dustpan, printed in two parts: PAN: The dustpan measures 200 (L) x 240 mm (W) x 70 mm (H), perfect for the build plate of a Prusa i3 MK3. You can scale it as you wish. I would recommend using a bed adhesive or printing…
I purchased Eve Motion Blinds which support Thread (and Matter as of Dec 2023): https://www.evehome.com/en-us/eve-motionblinds However, they only support roller blinds with an OD of 38-51mm. I only realized after purchase that my rollers…
The dryer exhaust port outside my house has 3 flaps which blow open when the dryer is running and close when the air stops. One of the flaps recently broke, necessitating a replacement. Approximate dimensions: Body of flap: 104mm (width)…
This is an IKEA Skadis mount for the Ubiquiti Unifi Cloud Gateway Ultra / Max. The original was created by @Blunk_1885178 but was made for a different orientation. Requires 2x Skadis T-Clip System - Low Profile Flush Mount Clips No…
Recently, my keyboard leg broke. Instead of buying a new keyboard, I decided to print a replacement leg. These fit an HP KU-1156 keyboard, but I suspect they may work for most keyboard models/brands. There is a Left and a Right leg,…
CORSI-ROSENTHAL AIR PURIFIER Bill of Materials: 360mm 2040 aluminum extrusion x8 400mm 2040 aluminum extrusion x4 M5 x 10mm button head hex screws x24 M5 sliding T-slot nuts x24 M5 x 16mm self tapping screws x 16 M3 x 17mm hex cap screws…
After getting started with my Flashforge Dreamer and printing @BaronWilliams' OmniStands, I was able to use a wide range of 3D filament from different manufacuters. The problem was, they tended to use filament spools of varying depth and…
I wanted a knife block similar in shape to the existing wooden one, but customized to hold 4 kitchen shears and 6 steak knives. I suggest using your slicer to “cut” the model between the top and bottom parts and create peg-and-holes to…
I printed @mroek's Cyclone triple track marble machine and loved it. However, being rather lazy I wanted an easier way to operate the marble lift. So I replaced the drive cap with my own that has a Phillips' indentation at the top, thus…
These are all currently available results.
