109 models
Just two simple kubotans, one with Planetler logo :) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 100% Category: Sport & Outdoors
My design of a HAWT :) Just stick asemble and/or use some glue. Total maximum height: ca. 292,5 mm Tower/Stem: ca. 145 mm Blade: 99,5 mm Check out my other designs here on thingiverse :) Print Settings Printer: CTC Bizer Dual Rafts:…
Want some cool accessory for your cat? After printing you'll have a roman cat fighting for the S.P.Q.R. Just assemble everything (better stick "aufbau" and "helm" together) and glue some feathers on top of it. After assembling "visier" to…
Just a short angled fore grip which fits exactly on the picatinny rail. Have fun :) Lenght: 89,9 mm Angle: 30° Barrel cover: https://www.thingiverse.com/thing:2886730 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't…
another silencer/suppressor, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 10% should be enough Category: Sport & Outdoors
just a silencer, fits on a 14 mm thread. Threaded version aviable now (14 mm ccw)! Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 10% should be enough Notes: Recommended layer height for…
Completely printabe airsoft foregrip :) UPDATED MOUNT FOR BETTER SCREWING! Version with screws: https://www.thingiverse.com/thing:2000846 Need some rails? https://www.thingiverse.com/thing:2053075 ,…
Replaces the original sling plate :) Forward assist: https://www.thingiverse.com/thing:2886570 Mag release: https://www.thingiverse.com/thing:2886262 Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter…
Just a simple rail riser :) perfect length for standard red dot ;) Three diferent hights available (picture shows highest version). Use M3 bolts and nuts. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes…
Custom magazine catch for M4/M16 airsofts :) Custom boltcatch: https://www.thingiverse.com/thing:2886261 Custom forward assists: https://www.thingiverse.com/thing:2886570 https://www.thingiverse.com/thing:2886571 Outer barrel cover:…
Threaded flash hider, fits on 14mm ccw thread. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 Infill: 50% Category: Sport & Outdoors
Since my new LiPo doesn't fit inside the handguard of my G608, I designed a LiPo battery box. To secure the cap I drilled a 1 mm hole though the joining of the two halves and put a wire though. Two versions available, one with two…
Just a simple fire selector for M4/M16 airsofts :) Redesigned for better mounting. Use a M2(9,4 mm) self-tapping screw please. Other versions: https://www.thingiverse.com/thing:2890070 https://www.thingiverse.com/thing:2889913…
another flash hider, fits on 14 mm thread. Threaded version aviable now (14 mm ccw)! Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 20% should be enough Notes: Recommended layer height…
Mute talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Just replace your original bolt cover. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,08 - 0,1 Infill: 100 % Category: Sport & Outdoors
Custom boltcatch for M4/M16 airsofts :) Custom magazine lever: https://www.thingiverse.com/thing:2886262 Custom forward assists: https://www.thingiverse.com/thing:2886570 https://www.thingiverse.com/thing:2886571 Outer barrel cover:…
NON-AFFILIATE LINKS: Coustom scope riser for the Begadi "Competition" scope:…
Wanted to create a mount on my own ;) my designs: flash hider: https://www.thingiverse.com/thing:2364355 short rails: https://www.thingiverse.com/thing:2053075 long rail: https://www.thingiverse.com/thing:2053074 fore grip:…
Lost or broke your G36 charging handle? Print a new one ;) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,1 Infill: 50%, 100% for pin Notes: Haven't printed yet. Category: Sport &…
another silencer/suppressor, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 10% should be enough Notes: Printed in BQ pure white. Category: Sport & Outdoors
another silencer/suppressor, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 10% should be enough Category: Sport & Outdoors
Custom forward assist for M4/M16 airsofts :) Another version: https://www.thingiverse.com/thing:2886570 Cusotm boltcatch: https://www.thingiverse.com/thing:2886261 Magazine lever: https://www.thingiverse.com/thing:2886262 Outer barrel…
Just a simple fire selector for M4/M16 airsofts :) Redesigned for better mounting. Use a M2(9,4 mm) self-tapping screw please. Other versions: https://www.thingiverse.com/thing:2889913 https://www.thingiverse.com/thing:2890069 Cusotm…
Everything can be printed, except: two M4 screws and nuts the two rubbers for stabilization plastic adhesive You'll need one "befestigung", one "stabrechts" and one "stablinks". Furthermore you'll need two objects of "stabverbingung", two…
Destiny raid logo keychain ready for dual extrusion! :) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Notes: I recommend at least a 0,3 mm nozzle. Category: Keychains
Twitch talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Custom forward assist for M4/M16 airsofts :) Another version: https://www.thingiverse.com/thing:2886571 Cusotm boltcatch: https://www.thingiverse.com/thing:2886261 Magazine lever: https://www.thingiverse.com/thing:2886262 Outer barrel…
Distance between drillings: 85mm Rail should fit on all G36 versions. I used M5x0,5 for mounting (JG 608) Long rail: http://www.thingiverse.com/thing:2095264 Standard version: http://www.thingiverse.com/thing:2053075 Another version:…
Just a simple fire selector for M4/M16 airsofts :) Redesigned for better mounting. Use a M2(9,4 mm) self-tapping screw please. Other versions: https://www.thingiverse.com/thing:2890070 https://www.thingiverse.com/thing:2890069 Cusotm…
Rail should fit on all G36 versions. I used M5x0,5 for mounting (JG 608) Short rail: http://www.thingiverse.com/thing:2095271 Standard version: http://www.thingiverse.com/thing:2053074 Another version:…
Multimaterial dice :) Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,05 Infill: at least 50 % Filament: DasFilament PLA White Category: Dice
Just a simple KeyMod foregrip. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25 % Filament: DasFilament PETG Black Category: Sport & Outdoors
Adjustable upgrade for G36 stock (doesn't affect foldability). I put some foam between the mounts and the stock to reduce the clearance. Use M3 nuts and screws. my designs: flash hider: https://www.thingiverse.com/thing:2364355 short…
another silencer/suppressor, fits on 14mm thread. Threaded version aviable now (14 mm ccw)! Print with prongs upside. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 10% should be enough…
Reusable hookah hygenic mouthpiece. Usable for mouthpieces form approx. 9 to14 mm bore diameter. Just break away the constructed support after printing. Print Settings Printer Brand: Prusa Printer: MMU2s Rafts: Doesn't Matter Supports: No…
Mount for bipods. The normal version fits on normal picatinny rails and the short one is especially for:…
Buck talisman from Rainbow 6 Siege, ready for dual extrusion! Created with Microsoft 3D Builder Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Category: Keychains
Just a simple fire selector for M4/M16 airsofts :) Redesigned for better mounting. Use a M2(9,4 mm) self-tapping screw please. Other versions: https://www.thingiverse.com/thing:2890070 https://www.thingiverse.com/thing:2889913 Cusotm…
Since almost everybody in my team got a G18c (cm.030) I wanted to tune mine optically. The result is this picatinny rail for mounting a red dot or a reflex visor (ca. 22 mm). Even if you don't want to mount a special visor on the rail you…
Improved the molle mount for stronger hold. You will need two M3 square nuts. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 50 % Filament: Das Filament PETG Black…
Custom flash hider for HK/Well MP7 :) Rails: https://www.thingiverse.com/thing:2837495 Stock: https://www.thingiverse.com/thing:2822468 Speedplate: https://www.thingiverse.com/thing:2837536 Print Settings Printer: CTC Bizer Dual Rafts:…
Distance between drillings: 85mm Rail should fit on all G36 versions. I used M5x0,5 for mounting (JG 608) Long rail: http://www.thingiverse.com/thing:2090887 Standard version: http://www.thingiverse.com/thing:2053075 Print Settings…
Rail should fit on all G36 versions. I used M5x0,5 for mounting (JG 608). Short rail: http://www.thingiverse.com/thing:2090888 Standard version: http://www.thingiverse.com/thing:2053074 Print Settings Printer: ctc Rafts: Doesn't Matter…
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% should be enough Category: Sport & Outdoors
Rail should fit on all G36 versions. I used M5x0,5 for mounting (JG 608). Short rail: http://www.thingiverse.com/thing:2053075 Grip: http://www.thingiverse.com/thing:2000846 Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter…
Custom suppressor with 14 mm ccw thread and inner structure. This suppressor changes the sound of your FireHawk but won't decrease the fps (tested on a HC-05 with 0,5 J) Angled grip: https://www.thingiverse.com/thing:2939218 Bolt catch:…
A combinated version for you guys :) Modified lever: http://www.thingiverse.com/thing:2120649 Longer standard version: http://www.thingiverse.com/thing:2183965 Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes…
Just a speed plate for enlarged MP7 airsoft magazines :) Use some double-sided adhesive tape for fixing. Rails: https://www.thingiverse.com/thing:2837495 Flash hider: https://www.thingiverse.com/thing:2840337 Stock:…
Thermite talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Mira talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Bandit talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
The mount fits for all handles :) Two different REVISED mounts and structured grip available now! Use M4 nuts and screws. Fully compatible with: http://www.thingiverse.com/thing:2134277 Flash hider:…
Montagne talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10% Category: Sport & Outdoors
Distance between drillings: 85mm Rail should fit on all G36 versions. I used M5x0,5 for mounting (JG 608). Long rail: http://www.thingiverse.com/thing:2053074 Grip: http://www.thingiverse.com/thing:2000846 Print Settings Printer: CTC…
The G18c (cm030) is a really nice airoft AEP, but in a fast combat its really hard to aim very precise. Since we are often playing CQB with 0,5 J only and I don't want to buy a gun above 100 € with 0,5 J I decided to create a fore grip to…
another flash hider, fits on 14mm thread. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 10% Category: Sport & Outdoors
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% should be enough Category: Sport & Outdoors
Works well on my JG36 :) Easy print (almost no supports are necessary)! Combinated: http://www.thingiverse.com/thing:2183960 Longer standard version: http://www.thingiverse.com/thing:2183965 Grip: http://www.thingiverse.com/thing:2000846…
Threaded flash hider, fits on 14mm ccw thread. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,1 Infill: 40% Category: Sport & Outdoors
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% should be enough Category: Sport & Outdoors
another flash hider, fits on 14 mm thread. Threaded version aviable now (14 mm ccw)! Recommended layer height for threaded flash hider: 100 µm Grip: http://www.thingiverse.com/thing:2000846 Print Settings Printer: CTC Bizer Dual Rafts:…
If you don't like the smaller original stock ;) Fits tightly on my Umarex/Well MP7A1. Rails: https://www.thingiverse.com/thing:2837495 Flash hider: https://www.thingiverse.com/thing:2840337 Speedplate:…
just a airsoft muzzle breaker, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% should be enough Category: Sport & Outdoors
Picatinny rail for an airsoft MP7 :) Flash hider: https://www.thingiverse.com/thing:2840337 Stock: https://www.thingiverse.com/thing:2822468 Speedplate: https://www.thingiverse.com/thing:2837536 Print Settings Printer: CTC Bizer Dual…
Aperture science talisman, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Grip: http://www.thingiverse.com/thing:2000846 Print Settings Printer: ctc Rafts:…
Just a simple rail riser :) perfect length for short/small red dot ;) Use M3 bolts and nuts. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 20 % Category: Sport & Outdoors
Was asked to model an outer barrel extension for the FireHawk... So here it is :) With this extension you'll be able to mount silencers with diameters bigger than the inner handguard diameter. Print Settings Printer Brand: Prusa Printer:…
Jackal talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% should be enough Category: Sport & Outdoors
Maybe you like StarWars ;) 140mm: http://www.thingiverse.com/thing:2113599 Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Category: Computer
Thatcher talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Custom picatinny rail for jacksb. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25 % Category: Sport & Outdoors
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% should be enough Category: Sport & Outdoors
Caveira talisman from Rainbow 6 Siege, ready for dual extrusion! Created with Microsoft 3D Builder Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Category: Keychains
another flash hider, fits on 14mm thread. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 10% Notes: Probably difficult print for your machine -> low feed speed recommended. Category:…
Use M4 nuts and screws. Fully compatible with: http://www.thingiverse.com/thing:2000846 Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0,3 Infill: 10% Category: Sport & Outdoors
Upper rail for a Well R4. Designed for Virhiryu. Print Settings Printer Brand: Prusa Printer: MMU2s Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 25% Category: Sport & Outdoors
Capitao talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Threaded flash hider, fits on 14mm ccw thread. You can find the grip ( https://www.thingiverse.com/thing:2000846 ) and the picatinny rails ( https://www.thingiverse.com/thing:2053074 & https://www.thingiverse.com/thing:2053075 ) in my…
Upgrade for G36c stock (doesn't affect foldability) Updated, for better nut fitting! The picture shows an old version with three screw holes. Use M4 nuts and screws. adjustable version: https://www.thingiverse.com/thing:2506433 Talisman:…
Use M4 nuts and screws. Fully compatible with: http://www.thingiverse.com/thing:2000846 and http://www.thingiverse.com/thing:2134277 Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 20%…
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 40% Category: Sport & Outdoors
A longer version of the standard catch. Easy print (almost no supports are necessary)! Modified lever: http://www.thingiverse.com/thing:2120649 Combinated version: http://www.thingiverse.com/thing:2183960 Print Settings Printer: CTC Bizer…
I wanted to design a four-stroke engine model on my own :) All you need is a 3d printer and some adhesive. If you want to you can use two or more cylinders in a series switching to create an in-line engine. The best example would be the…
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10% Category: Sport & Outdoors
Just a magazine holder which uses the mag mounting option. Use the strips from an old backpack (or something like that) for attaching to your leg ;) Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill:…
Just a quad fidget spinner :) Use 608zz and check out my other stuff here on thingiverse! :) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 30% Notes: Took 30 minutes to print…
Another tri fidget spinner :) Use 608zz and check out my other stuff here on thingiverse! :) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 30% Category: Other
Another tri fidget spinner :) Use 608zz and check out my other stuff here on thingiverse! :) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 30% Category: Other
Maybe someone want an ear protection? Here you go :) Inner diameter: 70mm scale for your perfect fit! Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 50% Notes: Filament: Hatchbox PLA black…
Use superglue to mount it on the magazine :) Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 40 % Filament: Das Filament PLA Black Category: Sport & Outdoors
Spare part for original buckle on tactical helmet. Print Settings Printer Brand: Prusa Printer: MMU2s Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 25% Filament: DasFilament PLA Black Category: Sport & Outdoors
just a simple filament guide. 2x: http://www.thingiverse.com/thing:2173952 3x: http://www.thingiverse.com/thing:2173956 Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 20% Notes:…
Cover for the grafics card calbe hole of a NZXT S340. With and without the p. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 10% Category: Computer
Threaded flash hider, fits on 14mm ccw thread. Check out my other designs, too :) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 Infill: 40% Category: Sport & Outdoors
another flash hider, fits on 14mm thread. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 10% Category: Sport & Outdoors
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 40% Category: Sport & Outdoors
2x filament guide. 3x: http://www.thingiverse.com/thing:2173956 1x: http://www.thingiverse.com/thing:2130148 Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 20% Category: 3D…
