Counting matching models…
New edition - April 2025: A guide pin has been added to prevent the cutter from twisting. The thread for the screw has been made more print-friendly. All that is needed in addition to the printed parts is 1 segment from 18 mm snap-off…
The Holder for kitchen utensils and knives consist of two parts. They must not be glued together, as this will make cleaning difficult. It was designed for a Bürster Premio Life caravan, but has been redesigned for more general use.
The holder is made for a pegboard with a thickness of 5.2 mm. The thickness of the IKEA SKÅDIS can vary, so it is not certain that it will suit everyone,
Lego has made a nice little Christmas train ( 30584 - Winter Holiday Train ), but unfortunately there are no tracks for this train, as it is too small for Lego's own train tracks. But then you can just make them yourself. This is a set of…
To make this cable entry, a print "Part B-C" and a print of "Part A" (A1, A2, A3, A4, A5 or A6) must be made. The thickness of the plate in which the cable entry is to be mounted, determines which "Part A" is to be used. This solution is…
Can be assembled without the use of glue In addition to the 3D printed parts that must be used: 2 x M4x35mm, nut and washer. 1 x Ø2 mm bicycle spokes in stainless steel (> 11cm). It may well be an old cracked spoke, as only the threaded…
The topedo is made with cavities for ballast. The chamber for ballast is approx. 150 cm3/cl. Balancing is important. Too little ballast will not dive, but will search for the water surface. Too much ballast will sink. Theoretically, the…
Christmas bauble inspired by the moon rocket from Tintin Destination Moon
Losing a piece of your puzzle is annoying. Even though you know the piece is gone, it doesn't feel like the puzzle is finished when it's possible to put the last piece. If you have a 3D printer, the solution does not have to be far away.…
A very simple small stand for pictures, cards, calendars, notes or whatever you want to place on top of your DELL computer screen. It is made specifically for the DELL U2415 monitor, with a hook to grip the edge of the back of the…
The print is designed specifically for the Schneider Electric Thermostat ClimaSys CC There are two versions of the print. One version with connect box for WAGO Connector and one version for 4 Connector Strip. It is designed for 2x0.75mm2…
A small tool to attach to the top of a broom or paint roller handle, designed to assist with Christmas light setup. Version v02 has a different 18mm thread (added in December 2025). Can be printed without support Thanks to Cornflakesninja…
Storage rack for the small tool set (Universal wrench and 2 allen key) that is in the box together with Original Prusa MINI+ Semi-assembled 3D Printer. The storage rack is made for mounting on an IKEA Skådis pegboard with a board…
These are all currently available results.
