P
PrintablesNir Dobovizki
Caulking Gun Nozzle Unblocker - without support
Caulking Gun Nozzle Unblocker - without support
- Downloads
- 3,660
- Likes
- 1,189
- Rating
- 4.98
All models
Counting matching models…
P
PrintablesNir Dobovizki
Silicon tube stopper
Some time ago I found a silicon tube stopper on thingiverse - but it didn't fit tubes sold here (those are 16mm OD of the screw) So I made a new one - but it didn't seal well And then I designed this model, it has space at the bottom (or…
- Downloads
- 1,851
- Likes
- 444
- Rating
- 4.83
P
PrintablesNir Dobovizki
Silicon tube stopper for flexible filament
I published a silicon tube stopper with a TPU gasket a few days ago - and that got me thinking, if I make the whole thing out of TPU I won't need the separate gasket part. I made it shorter so you'll be able to tighten it without hitting…
- Downloads
- 562
- Likes
- 136
- Rating
- 5
P
PrintablesNir Dobovizki
Printed SG90 Servo Connector
The SG90/9G servo is very popular - and every time I see it in a project (including my own ) the little white plastic connector that comes with the servo is used (because the connector has tiny teeth that are not printable). For my next…
- Downloads
- 508
- Likes
- 12
- Rating
- 4.5
P
PrintablesNir Dobovizki
Articulated Robot In 10 Minutes
I have a problem - it's difficult to demonstrate a 3D printer to your guests - you show them the printer, send a small print, and .... it will be ready after they leave. So I designed this model with the explicit purpose of being able to…
- Downloads
- 373
- Likes
- 31
- Rating
- 5
P
PrintablesNir Dobovizki
Badge Holder
An Id badge holder for credit card sized badges, with a honeycomb pattern on the back because everyone loves honeycomb patterns. I printed mine in white PETG because I believe it will be more durable than PLA. Print in fie orientation (on…
- Downloads
- 344
- Likes
- 28
- Rating
- 5
P
PrintablesNir Dobovizki
Fast edge over/under extrusion test
I doing some testing and I needed an over/under extrusion test I can repeat with different settings without wasting hours or tons of material - so I designed this little thing. It uses about one gram of filament and takes 7 minutes to…
- Downloads
- 235
- Likes
- 25
- Rating
- 5
P
PrintablesNir Dobovizki
Durable Fully Printable Customizable Spring
My previous printable spring has an annoying tendency to break, this is the result of me trying to solve that problem. In this spring every layer is made out of continuous and long strands of plastic, this makes it very strong and…
- Downloads
- 214
- Likes
- 23
- Rating
- 5
P
PrintablesNir Dobovizki
Fast over/under retraction test
Retraction has a very big effect on print quality, especially in infill and thin areas, and also, the correct retraction can vary quite a bit between materials, meaning it needs to be calibrated for each material – including the expensive…
- Downloads
- 213
- Likes
- 14
- Rating
- 5
P
PrintablesNir Dobovizki
Emergency Stop "Mushroom" Push Button
This is a nice emergency stop mushroom button you can place above any switch, this is both useful for safety and to make your machine look more impressive. There are 3 ways to use this model: You can use the entire model as-is, the box is…
- Downloads
- 206
- Likes
- 34
- Rating
- 4.5
P
PrintablesNir Dobovizki
Code Monkey
A code monkey Don't have a 3D printer? buy one at my shop Not related to the song with the same name (if you know what a code monkey is and don't know the song got to youtube and listen to it now) Print without support (it already has…
- Downloads
- 202
- Likes
- 14
- Rating
- 5
P
PrintablesNir Dobovizki
Dyson nozzle connector
A connector to make your own nozzle/adaptor for Dyson v8 v10 and probably other models
- Downloads
- 136
- Likes
- 18
- Rating
- 5
P
PrintablesNir Dobovizki
Robot toilet paper holder
What can I say, it's a robot-shaped toilet paper holder. Don't have a 3D printer? Just want one already printed and assembled? buy one at my shop This is my second bathroom robot (the first one is http://www.thingiverse.com/thing:1409367…
- Downloads
- 126
- Likes
- 31
- Rating
- 5
P
PrintablesNir Dobovizki
Display stand for lego planes
A way to display your lego planes
- Downloads
- 104
- Likes
- 13
- Rating
- 0
P
PrintablesNir Dobovizki
Fully Printable Spring-Loaded Missile Launcher
This is a small spring-loaded missile launcher based on my printable spring design The design doesn't have a trigger, there's a small hole in the back of the launcher you can tie any thread or wire to and pull it down to fire (the reason…
- Downloads
- 97
- Likes
- 14
- Rating
- 2
P
PrintablesNir Dobovizki
Resting Robot Cellphone Stand
This is my first model on Thingiverse, a cute little robot that looks a bit tired but is always happy to hold your cellphone for you. Don't have a 3D printer? Just want one printed for you? buy on at my shop There are 3 versions of this…
- Downloads
- 89
- Likes
- 6
- Rating
- 0
P
PrintablesNir Dobovizki
MiBox 3 Wall Bracket (cables from below)
The Xiami MiBox is a really nice Android TV streamer, but it does have a really strange shape that makes it not fit any square bracket. I wanted to hang mine on a wall and needed some way to hold it in place so I designed this bracket.…
- Downloads
- 84
- Likes
- 10
- Rating
- 0
P
PrintablesNir Dobovizki
Exhaust fan for any enclosure
This is an enclosure exhaust fan you can add to any enclosure, it uses a standard 120mm fan and standard clothes dryer air hose. The part has space for an activated carbon filter, but with a cheap fan the filter reduces the airflow too…
- Downloads
- 84
- Likes
- 12
- Rating
- 0
P
PrintablesNir Dobovizki
MiBox 3 Wall Bracket (cables from left)
The Xiami MiBox is a really nice Android TV streamer, but it does have a really strange shape that makes it not fit any square bracket. I wanted to hang mine on a wall and needed some way to hold it in place so I designed this bracket.…
- Downloads
- 69
- Likes
- 4
- Rating
- 0
P
PrintablesNir Dobovizki
LG Nexus 5X USB C Cable Protector
This is a cable protector for the USB-C cable that comes with the Nexus 5X. Print wit 100% infill, no supports, It's intentionally a very tight fit, I recommend inserting the cable immediately when the printer finishes when the plastic is…
- Downloads
- 64
- Likes
- 8
- Rating
- 0
P
PrintablesNir Dobovizki
Battery door for Microsoft Wireless Mouse 3500
The battery door on one of my computer mice got lost, luckily I have a few more of the same model so I could measure the door and make a new one. This was a tricky model to design because of all the curves, I scanned another door with a…
- Downloads
- 52
- Likes
- 1
- Rating
- 5
P
PrintablesNir Dobovizki
Robot with ultrasonic distance measuring sensor and microcontroller
A big robot with an HC-SR04 Ultrasonic distance sensor in the eyes and a mini-breadboard with an Arduino Nano microcontroller in the body. This is the first model I designed with electronics inside the model. This model seems complicated…
- Downloads
- 51
- Likes
- 5
- Rating
- 0
P
PrintablesNir Dobovizki
Box for SDS drills, screws and anchors
The box is based on Parametric Box v2 (single clasp)
- Downloads
- 50
- Likes
- 15
- Rating
- 0
P
PrintablesNir Dobovizki
Robot Dog Poop Bag Holder
This is a robot shaped dog poop bag holder, use it when you walk your dog and everyone will know how cool and fashionable you are. Don't have a 3D printer? Just want one already printed? buy one at my shop This model is designed for the…
- Downloads
- 41
- Likes
- 7
- Rating
- 0
P
PrintablesNir Dobovizki
Giraffe
I know real giraffes don't look like that, but its close enough, it was fast to model and fast to print. No supports required (except for the too small pieces of modeled in support you need to cut)
- Downloads
- 39
- Likes
- 3
- Rating
- 5
P
PrintablesNir Dobovizki
ESP 01 Programming Cradle
The ESP 01 (ESP 8266 based) is a very nice tiny WiFi-enabled board, it's extreamly useful, especially if you upload new firmware into it. However, it is not solderless-breadboard friendly and requires connecting and disconnecting wires to…
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesNir Dobovizki
Small "technology appliance" box for Raspberry Pi and buck converter
A small box for a raspberry pi and a buck converter that looks like a typical technology appliance you'll find at home (set-top box, router, etc.). Designed to look like any of the boxes we usually have around the TV and not call…
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesNir Dobovizki
Audio Plug Socket
This is a fully printable 3.5 audio jack socket that connects directly to breadboard jumpers. I was looking for a cable to connect components of another project and decided to use standard audio cables - they are available everywhere, are…
- Downloads
- 27
- Likes
- 7
- Rating
- 0
P
PrintablesNir Dobovizki
Power supply to 2 AAA batteries adaptor with buck converter
This model is an adaptor that lets you connect an external power supply to a device that only works on 2 AAA batteries. It has channels to pass wires to where the battery's contact would have been and place for a mini buck converter that…
- Downloads
- 25
- Likes
- 6
- Rating
- 0
P
PrintablesNir Dobovizki
Outhouse double poop-bag dispenser
An outhouse-shaped dispenser for two poop bag rolls
- Downloads
- 22
- Likes
- 5
- Rating
- 0
P
PrintablesNir Dobovizki
Basic Rapberry Pi Case
This is a basic Raspberry Pi case, designed for the Raspberry Pi 2 but should also fit the 3 and B+ The case has access to all the Pi's external ports and the SD card, there's a decorative hole in the lid (no fan) that can help a bit with…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesNir Dobovizki
3 Sided USB drive spinner
This is a USB drive inside a fidget spinner I originally designed for my son (now used by my wife). More details on my blog at https://nirrobotics.com/2017/05/the-usb-spinner/ It uses a 4x13x5mm 624 bearing, a USB drive of the kind used…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesNir Dobovizki
Battery Door for Yongnuo YN465 SpeedLite
My YN465 flash took a dive off a lightstand a few years ago and the battery door broke, I kind-of got it to stay in place and it worked until last week when it finally failed. So I designed this replacement door, this is a new design and…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesNir Dobovizki
Tracktor robot with place for electrnics
This is a model I made for my youngest son. There's a place for a battery box, a 4x6cm proto-board, a power switch and a led on top of the head. Mine has a 555 IC that blinks the led and is printed in a really beautiful wood-filled PLA.…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
These are all currently available results.