P
PrintablesColten (Hardware Haven)
Lab Rax 120mm Fan Side Panel
Replacement Lab Rax side panel that can mount a 120mm fan. Lab Rax: https://makerworld.com/en/collections/5813742-lab-rax
- Downloads
- 318
- Likes
- 51
- Rating
- 0
All models
Counting matching models…
P
PrintablesColten (Hardware Haven)
HP EliteDesk/ProDesk Mini Flex 2 2.5Gb Ethernet Bracket
This works with HP EliteDesk and ProDesk G6 (and possibly G9?) Mini systems. It replaces the blank panel on the Flex IO 2 Port and let's you mount an ethernet adapter. It might work with other Ethernet adapters, but I've only tested it…
- Downloads
- 254
- Likes
- 44
- Rating
- 5
P
PrintablesColten (Hardware Haven)
5-Bay 3.5" Hard DriveCage for 120mm Fan Mount
Overview This was designed to fit inside this specific case , where it replaced a 12-bay drive cage that is attached to some 120mm fan mounts. It might fit fit other cases with similar mounting points, but no guarantees. These each…
- Downloads
- 214
- Likes
- 70
- Rating
- 0
P
PrintablesColten (Hardware Haven)
Cover for 2X 10 inch Rack 1U
I wanted to use 2 of the 2x3.5" bays from Nautilus Forge , but I wanted to add some labels on the front, so I just made this very simple little cover. You have to install the bottom bay first with just the bottom 2 screws, and then just…
- Downloads
- 184
- Likes
- 50
- Rating
- 0
P
PrintablesColten (Hardware Haven)
80mm Fan Shroud for Nvidia V100 SXM2
This is NOT a very good model, I just designed it for this video (need to add link after publishing) and wanted to share it on the off chance someone needs it. It fits the shorter heat sinks like what is on this listing here:…
- Downloads
- 165
- Likes
- 20
- Rating
- 0
P
PrintablesColten (Hardware Haven)
![[Compact] Framework Industrial Mainboard Case](https://media.printables.com/media/prints/6cd80c56-b03f-4332-a792-97700c120b5e/images/10655890_16338e5a-1fab-4623-8bf4-d74735e77fbb_ec5db624-2b2f-46c2-adff-4f47f07da8ff/compact-industrial-case.png)
[Compact] Framework Industrial Mainboard Case
Remix of the Framework Industrial Mainboard Case by @Magmabow. It removes the expansion card slots so that it's easier to plug directly into the USB ports on the main board. It also makes it so that it can be printed in two pieces on a…
- Downloads
- 150
- Likes
- 17
- Rating
- 5
P
PrintablesColten (Hardware Haven)
OPS Module 10" Rack Mount
I created a simple mount to hold OPS modules in a 10" rack. There are two versions: V1 is what I used in my video. It works fine but is a bit flimsy. V2 is more rigid, but uses a bit more filament. It also has better fitment with the…
- Downloads
- 125
- Likes
- 22
- Rating
- 5
P
PrintablesColten (Hardware Haven)
GridFinity 3.5 HDD Holder
There are two different models: 3x5 units -- holds 7 3.5" drives (odd number but seemed to be the most efficient) 3x3 units -- holds 3 3.5" drives BUT has wider slots (I use this to store cold spares still in packaging) Category: Computer
- Downloads
- 119
- Likes
- 21
- Rating
- 5
P
PrintablesColten (Hardware Haven)
4-Button ESPHome Controller Enclosure
A 4-button controller housing for ESPHome or whatever else you might want to do. I use it to run scripts/scenes in Home Assistant. it requires a SEEED Studio XIAO ESP32 board and 4 standard keyboard switches. You'll need: 1 - Seed Studio…
- Downloads
- 106
- Likes
- 19
- Rating
- 5
P
PrintablesColten (Hardware Haven)
1U JetKVM Rack Mount Holder
The JetKVM just stays in place with friction. Category: Computer
- Downloads
- 78
- Likes
- 7
- Rating
- 0
P
PrintablesColten (Hardware Haven)
1×5.25" ODD Bay to 4×2.5" Adapter (Remix)
Just a very simple remix of the original design. I printed mine in Pro PCTG with no supports.
- Downloads
- 76
- Likes
- 8
- Rating
- 0
P
PrintablesColten (Hardware Haven)
OPS Module 10 Inch Rack Bays
Works either for OPS or the larger OPSC Modules. From this video:…
- Downloads
- 28
- Likes
- 6
- Rating
- 5
P
PrintablesColten (Hardware Haven)
Louvered Door 80mm Fan Duct
A duct I made to pull or push air through a louvered door with an 80mm fan. Check out the video here: https://www.youtube.com/watch?v=vQdEbQBt78s Print Settings Printer Brand: Bambu Lab Printer: A1 Mini Supports: No Filament: Generic PETG…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesColten (Hardware Haven)
Small Vesa Kiosk Stand (75x75, 50x75)
A simple stand that I made for mounting an Aopen Chromebase Mini Commercial for use as a Home Assistant controller. It has 75mm x 75mm spacing for most smaller devices, but also has 50mm x 75mm holes as well—this allowed me to mount the…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesColten (Hardware Haven)
60mm Fan Mount For Inspur X540-T2
Clip-on 60mm fan bracket for Inspur X540-T2 dual 10Gb NIC. Used in this video here: https://youtu.be/3QGLxbYxoyA Category: Electronics
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesColten (Hardware Haven)
DELL/EMC AX4-5 Replacement Caddies (3.5" and 2.5")
I created these for a project with an old EMC/Dell JBOD They were originally made for an EMC MPE, but this should be the same enclosure and therefore the same caddy designs for the Dell AX4 and possibly AX5 lineup. Note that these don't…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesColten (Hardware Haven)
Server PCIe Card Shrouds (Fits some half-height server cards)
Shrouds were used in this video here: https://www.youtube.com/watch?v=J0ibj-7mhQs I can't guarantee it fitting any cars other than what I used in the video. Print the base and snap it to the card. Then print either the full shroud or the…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesColten (Hardware Haven)
Microserver Tray from HH Video
From this video: https://youtu.be/eAbyIfv7bEU I don't see why someone would want to recreate this project, but I know people will ask for the file, lol. Category: Computer
- Downloads
- 7
- Likes
- 2
- Rating
- 0
P
PrintablesColten (Hardware Haven)
HP Microserver Gen7 Hardware Haven Logo
Not sure why you would want this logo, but here it is. Simple replacement logo for the front of the case. I printed with white PLA for the majority, and then black for the top few layers. This helped the light to be more visible.…
- Downloads
- 5
- Likes
- 2
- Rating
- 0
These are all currently available results.