Counting matching models…
Cookie cutter for gingerbread or other cookies. With imprints in the dough. Snorlax cookie cutter: https://www.printables.com/model/337758-snorlax-cookie-cutter Pokemon ball cookie cutter:…
A filament guide for IKEA Lack enclosure allowing the filament to smooth following the X-carriage while it moves along the X-axis. Internal dimensions (5 mm width) allows use of ø4 mm PTFE tube from e.g. dry box to extruder. Print…
The cap is designed to fit PET bottles (with thread PCO1881 which fit all bottles I could find in my household) and turn the bottle into a water irrigation system for e.g. flowers. The cap is printed without support, but a 0,2 mm surface…
Wheel bolt cover for VW and Skoda rims. Print instructions Print the cover as imported, then no additional support is required. The model has built in support for layer height 0.2mm. The support can easily be cut off, but it is not…
Foldable tablet stand with all parts 3D-printed. The tablet can be positioned in 4 different angles. Each stand needs 4 lock pins. If there are problems inserting the locking pins, verify the roundness of the holes by using a 6 mm drill.…
Spare part funnel for Bosch or Siemens dishwashers to refill salt. Fits probably other brands as well. Funnel diameter 45mm.
A box into where cotton sticks can be stored when traveling. I've also created on similar box for tooth picks: https://www.printables.com/model/304726-toothpick-box
Cookie cutter for gingerbread or other cookies. With imprints in the dough. Pikachu cookie cutter: https://www.printables.com/model/331268-pikachu-cookie-cutter Snorlax cookie cutter:…
Wheel bolt cover for VW and Skoda rims. Print instructions Print the cover as imported, then no additional support is required. The model has built in support for layer height 0.2mm. The support can easily be cut off, but it is not…
Box for four 33 cl cans. If the bottom is printed and glued to the box multiple boxes can be put on each other, There are grooves on the bottom to lock onto cans as well to allow multiple filled boxes be store on top of each other. To…
There are two different high on the lid, 10 mm rep. 20 mm. This means you can use same container and only change the lid if using different long tooth picks. I've also created a similar box for cotton buds:…
Cookie cutter for gingerbread or other cookies. With imprints in the dough. Pikachu cookie cutter: https://www.printables.com/model/331268-pikachu-cookie-cutter Pokemon ball cookie cutter:…
The model has a sacrificial layer at mounting holes to be removed. This allows the mount being printed without support.
Spare maintenance tool to open body on Husqvarna Automover 305. Tho tool has a protruded edge at the back to allow easier removal from its space. When the tool is inserted into its space the distance should be facing downward.
Jar with threaded lid. Outer diameter 105 mm, inner diameter 94 mm, height inside 25 mm.
Unicorn gingerbread cutter for Christmas, or other cookies.
Protective case for Bosch Intuvia e-Bike display. When the diplay is removed form the bike, a cover can be used to protect the electrical connections: https://www.printables.com/model/421871-bosch-intuvia-electrical-connection-cover The…
Protective cover for Bosch Intuvia e-Bike electrical connections on the bike when removing the display. When the cover is not in use it can can be stored in https://www.printables.com/model/140906-protective-case-for-bosch-intuvia-display…
A knob for Prusa Mk3 series 3D printers. No wings on the knob. There are spiral grooves on the surface, which also has been inclined to allow better grip on the knob.
Small sandpaper holder sized 42 x 22 x 10 mm. Perfect to be used when building e.g. models etc.
Can adapter to allow slim can fit into a car's can holder. Recommending printing in ABS, ASA or PETG as cars tends to be very hot summertime. Spiral vase mode adapters are available:…
If you like me occasionally rent cars you may discover there is no parking disc in the rental car. This parking disc is small enough to fit in your wallet and will always be available. And if you forget it in the car, you can always print…
Box for six slim 33 cl cans. If the bottom is printed and glued to the box multiple boxes can be put on each other, There are grooves on the bottom to lock onto cans as well to allow multiple filled boxes be store on top of each other. To…
Lamp shade for window- The lamp shade are threaded M10 x 1 to fit cable strain relief and nipple. Add cable, cable strain relief, lamp socket and lamp bulb. Strain relief can be printed using…
This part solves the problem with lamps in windows, e.g. advent stars, not hanging straight in the window. Slide the "twister" onto the cable and adjust the cable until the lamp is hanging as you want. The cable twister will fit flat…
Adjustable sink tray organizer. It is available in three sizes, one adjustable 165 and 210 mm, 205 to 270 mm and 245 to 310 mm. Each size contains of for parts, Bottom Part 1, Bottom Part 2, Top Part 1 and Top Part 2. Each parts also…
This holder makes it easier to have e.g. the yoghurt package standing upside down in the refrigerator to have the remains pouring down to the opening. This holder fits packages where the cap is on the side, e.g. Tetra Pak Rex, Elopak Pure…
The box can contain up to e.g. 10-12 TUC crackers, The lid will snap onto the bottom preventing box to unintentionally open. 2021-03-10: Added 5 TUC crackers version.
Made a box to store the different heads, bodies and parts from nendroids. The box have two storages of heads, one for a body and a compartmen for smaller accessories. There are lids with text for Hatsune Miku, Osamu Dazai, Atsushi…
Spare part funnel for dishwashers to refill salt. Funnel diameter 30 mm.
Can adapter to allow slim can fit into a car's can holder. Recommending printing in ABS, ASA or PETG as cars tends to be very hot summertime. Here is a solid can adapter: https://www.printables.com/model/287494-slim-can-adapter-for-car
Mount for katan on 19mm thick shelf, i.e. Billy bookshelf.
This holder makes it easier to have e.g. the yoghurt (or e.g. sour milk) package standing upside down in the refrigerator to have the remains pouring down to the opening. This holder fits packages where the cap is on the top, e.g. Tetra…
Replacement pin for toilet seat's hinge. Fits for e.g. Ifö, Gustavsberg and others using pins dimensions: ø6,5mm L=24mm. Recommending printing multiple instances to allow cooling between layers, and min 4 perimeters.
Can adapter to allow slim can fit into a car's can holder. Recommending printing in ABS, ASA or PETG as cars tends to be very hot summertime. Here is a solid can adapter: https://www.printables.com/model/287494-slim-can-adapter-for-car
his holder makes it easier to have e.g. the yoghurt (or e.g. sour milk) package standing upside down in the refrigerator to have the remains pouring down to the opening. This holder fits packages where the cap is on the top, e.g. Tetra…
This is cable holders to hide e.g. lamp cables if lamp is hung in a Kirsch curtain rod. The lamp should of course not be to heavy. I've attached one version for round cable, dia 6,5 mmm and for a flat cable, 7 x 4 mm.
Colour print does not require MMU, but printed at two separate parts. Disable elephant foot compensation for and enable “External paramiters first” . To print the coaster with colour on printers with one nozzle: Import the file "Hatsune…
The organizer is held in place using a magnetic holder mounted on the outside of the tray. This allows the organizer to be easily removed and reattached as needed. The magnetic holder requires two 10×10×10 mm neodymium magnets, and the…
These are all currently available results.
