Counting matching models…
A Lego mini figure can sit in the kayak. The Kayak floats, but there is also a cover to protect it from water splashes. This flips over like a real kayak, nor very stable on the water. Print Settings Printer Brand: Creality Printer: Ender…
This part was originally not meant for 3d printing, however, that should not hold us back. The orientation on the printer bed makes a difference. I am not sure which is better, try different ones. The one in the pictures was placed…
Case for raspberry pi 4 with 5 inch display for Klipper. The design revolves around the display: CUQI brand 5 inch DSI touch display from amazon . I am using this display since a couple of days with a Klipper installation. This is not a…
Sunglasses wall mount rack/holder. There are mounting holes on the back. Multiple pieces can be stacked in a row (use 2 end caps and connectors in this case).
Long GoPro thumb screw, for my floating case . A M5 60mm bolt with hex head needs to be inserted. Screw in an M5 nut to pull in the screw all the way. I added later shorter versions also for 30, 40, 50mm bolts. See download files. Print…
This is an ice skate blade cover. It is a symmetrical design, requiring 4 printed parts in total for a pair. To form one cover, 2 pieces have to be attached together by an elastic cord, as shown in the pictures. I recommend using a 2.5mm…
This filament sensor mount is smaller than my previous design, restricting the movement of the sensor to keep it more stable. Requires an m3 threaded insert to be inserted into the mounting whole. Print Settings Printer Brand: Creality…
This stand has a 25 degree incline. Print it with supports. On the bottom there are 2 recessed places for a rubber sticker. If you don't want to add this, just don't remove the supports.
This is a remix of the 25 degree stand. This stand has a 35 degree incline. Print it with supports. On the bottom there are 2 recessed places for a rubber sticker. If you don't want to add this, just don't remove the supports.
DJI Mic Mini magnetic lanyard. I use a 2mm cord. The holes are 3mm for the cord. In case you are using magnet delivered with the Mic Mini, just press it in an you are good to go. In case you would be using other magnet, add a drop of glue…
When jumping with the Arrma Typhon Grom the bottom hits to ground, causing some severe use and tear. These pieces are to be mounted on the bottom front and rear, over the existing piece. Just undo the 4 screws and mount this with them.…
Print it out of (flexible) TPU, 95A works well. Keep the print light and flexible by using 0.8mm wall (2 layers) and 0.8mm top and bottom layer. Use supports. Print it with the front side facing upwards to minimize supports. Use 10%…
The temples of my sunglasses broke so I designed this replacement part. I used ASA but other materials should work also. I reduced the side-walls of the print to 2 layers (0.8mm) to keep it light and a little flexible. The design file is…
GoPro adapter to DJI action 3/4 magnetic mount system. This is an update version, compatible with the latest DJI Action 4 mounts (previous version was Action 2 compatible) This adapter requires 2 magnets 18x8x4 mm size. These were the…
I have been using this mount system for a while and I find it very practical, because its easy to move the camera around. It is compatible with all latest GoPro models 5, 6, 7, 8, 9, 10, 11. I have made this out of PETG, 0.2mm resolution,…
A case for mounting Samsung SmartTag+ (or SmartTag) tracker with zip-ties. Example: mount a SmartTag underneath bicycle saddle. The design requires 4x M3 melt-in-inserts and 4x M3 10mm bolts (for battery later replacement). This will not…
I designed this for my kid to play with. Having no clear references I tried to replicate what I have seen in images over the internet. Have fun.
This is a GoPro Hero 9/10 floating case. This must be printed with TPU (flexible) filament, so that the case can flex to push in the camera (and not scratching it). This case will keep the GoPro floating, however this depend also on what…
Handles for skipping rope with 606 ball bearing. 2 x 606 ball bearing required for each handle (4 in total). The outer bearing is press-fit, the inner one is loos-fit, you can pull it in using the rope itself. Supports are required for…
Print it out of (flexible) TPU. Keep the print light and flexible by using 0.8mm wall (2 layers) and 0.8mm top and bottom layer. Use supports. Print it with the back screen side facing down to minimize supports. Use 10% infill.
This is a floating case for the GoPro Hero 5,6,7. It is important to keep the case light but also airtight so take caution at the slicer settings. 10% infill is required to keep the structure sturdy and to support the top layers. The case…
Print it out of PETG. Support required. Increase the number of walls (to ~6) to achieve 100% infill. Requires an M5 hex nut (add a drop of superglue if required). Secure it after mounting with a zip-tie. The design file is there too.…
Just press in the smartwatch charger and wrap around the back side the excess cable. There are 2 Models, one for the current original Samsung(30mm) and one for the Apple (28mm) changers. Print it on the flat back side. Support are required.
Duali contactless reader card holder. Clip it on. Hold card in place. Flip it on it's edge for printing, that way no support are required. Category: Other
uTrust 4701 F contactless reader card holder. Clip it on. Holds card in place. Category: Other
This is a cover cap, placeholder for automatic triggering system of the Decathlon (not anymore) Automatic Inflatable Life Jacket. Just unscrew from the bottom of UML unit the trigger system and place this cap to prevent unintended…
Any material is fine. No supports required.
These are all currently available results.
