Counting matching models…
A very basic model that I designed in Inventor (.ipt included), to store the hotends for the A1 & A1 mini printers. The holder makes use of the magnets on the back of the hotends (be aware though my 0.6 & 0.8 hotends had the magnets…
A recent project I was making required an LDR and it was very cheap to purchase a bulk load already on small boards that use the LM393 & output Analog & Digital signals, from Ali Express: https://www.aliexpress.com/item/1959461876.html I…
A remix of [ https://www.thingiverse.com/thing:3017633 ] I already used the above thing on a 40mm fan for my printer setup and wanted a matching design for a couple of 60mm fans that I use so I designed my thing entirely based on the…
After upgrading my IoT display from an enclosed 7" Nextion to the 10.1" that does not come with an enclosure, nor does Itead even sell one, I needed something to protect the screen. The pdf with dimensions from Nextion,(which I have…
Designed for 0.4mm nozzle @ 0.2mm layer height, recommended 25% infill, no supports. Holds 10 C245 style tips. In my design I wanted to add some weight near the base to make the holder more stable so using CURA's 'Pause at Height'…
Just a simple addon part for the great model: https://cults3d.com/fr/mod%C3%A8le-3d/divers/gemini-11-titan-2 from Amphioxus I was not that happy with the stability of the model just resting on the four small pads of the base so designed a…
Just a basic box to enclose and mount the BTT UPS 24V v1.0, knowing me I have probably over engineered this ;) To secure the base part to extrusion use 2x M3x8mm machine screws with 2x M3 T nuts, maybe a thin washer too. Fit the UPS to…
In my current house I do not really have any great access to putting the antenna for my FR24 flight tracker in a suitable outdoor position but still want as good reception as I can get. I found that by securing the antenna to the inside…
Simply just replacement legs for the Corsair Raptor K30 keyboard. Designed to be printed at 0.2mm LH with extremely minimal and easily removed support under the lugs.
I wanted to add a little more detail to the US Flags on my Saturn V model from: https://cults3d.com/en/users/theamphioxus/creations this one: https://cults3d.com/en/3d-model/various/apollo-15-saturn-5-pack-1-4-etage-s1c the blue ground…
This is my dimensionally accurate, (after many iterations & fails), of the left rear mount required when upgrading to a dual Z axis configuration. I have also included the stepper bracket as mine was modelled using a thinner than the…
Just a simple design because I was fed up with bug taking a swim in my drinks when left unattended. Don't you just hate it when you put your drink down & go off to do something else and when you come back a bug is floating in it. Simply…
Designed to be printed at 0.2mm layer height. Print at orientation as opened in slicer. Minimal support required for FramePart.stl, no support required for SensorPart.stl Finished mounting as shown in image. HARDWARE REQUIRED 2x…
They way that an iPhone 11 Pro Max is secured in the RC for the DJI Mini 2 means that it interferes with the power & volume buttons and they can suddenly cause unwanted actions to the phone when in use, i.e. powering off the phone, not…
Designed for 0.4mm nozzle @ 0.2mm layer height. Lots of calibration tools available, I just wanted something to give me a bigger overall picture than the usual 20x20x20 cubes to calibrate my Steps/MM in X, Y & Z This is 100mm in all 3…
I use an OEM NOIR Pi Cam that does not have power traces on the PCB mounting holes, so I designed a lightweight camera & IR led mount. My mount is designed to directly fit the gooseneck jointed arm setup:…
I got inspiration from: https://www.thingiverse.com/thing:3796938 and thought that this was a extremely clean and simple answer to adding a second Z stepper & leadscrew to my Anycubic Mega Zero 2. Having tried many other designs to…
I noticed that wherever I placed my HomePod I would get vibration from something on the same surface with heavy bass sounds. All parts need to be printed in the orientation of the stls for best finish & I have tried my best to minimize…
Just a simple model to add a cover to the front of the Y carriage on an Anycubic MZ2 I have included a badge that can be glued on [optional] complements these V slot covers: http://www.thingiverse.com/thing:3396601 Cover @ 0.2mm LH Badge…
Here is my remix of: https://www.thingiverse.com/thing:4699840 for Anycubic Mega Zero It is necessary to replace the extruder screws with 40mm long ones. The Runout sensor can be left complete with no need to remove the base but only to…
A slight remix of: https://www.thingiverse.com/thing:4221768 This is firstly a mirrored part to mount the screen on the right hand side. Having done this for my own purposes I found that the bracket was a little insecure with just the…
These are all currently available results.
![Yet Another Calibration Tool [Y.A.C.T]](https://media.printables.com/media/prints/281544/images/2492536_972ed959-446f-4233-9b7c-1b5238d64351/large_display_100mmx3axis-calibration_281544.png)
