Counting matching models…
I chose this model was because of the “Height”. I have noticed the power wires at the right-back corner, which means we would need more space to make sure the wires won't interfere with the platform leveling process. And the stage I have…
Description The stock model cooling fan duct sucks. Here I have redesigned one. The main purpose is to add air flow guiders so the cooling air could be more even and stronger. To maintain the dimension is important so it would not cause…
THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…
Tweaked from Qidi Q2 Cable Chain Clip Guider ( I can't find any specific link to it ) to make it easier for installation. Can be used for 9mm wide cable chains. Make sure the two dots are on the top when you print. Updated on Nov 27,…
Multi-Function Desiccant Bin for Qidi Box. Compatible with regular 1kg filament spools, fits Ø200mm and 52~70mm wide spools. Capable for up to 1kg desiccant . Yes, it's big. :) Quick to remove and attach , so you can easily swap…
Qidi Q2 puts its AP (Host MCU) Board on the left side panel in the chamber. This leads to the chances of the system crash(unexpected shutdown) due to the high temperature of the chamber. General speaking, comsumer grade MCUs have -40°C ~…
One of the main functions of Qidi Q2 is the chamber heating. However practically the heating efficiency is fairly low due to its thin plastic panels. Thus it also consumes a lot of electricity because of this especially if you have a long…
A jig, designed for helping you make your own nozzle wiper, which can be used to replace Q2 trash roller wiper. The wiping result is much cleaner than stock one. Material The raw material is 4mm thick silicone bar , ideally 12mm wide.…
The annoying ratchet noise of the Qidi BOX is well known. Personally I had tried to apply grease in the ratchet mechanism to lower the clicking sound. Not really satisfied with the result. It's ok at the beginning. However, the grease…
Description When you have some spools which are made by paper, or your spools have broken edges, or less heat resistant spools, etc. You may need these Ultra Thin Spool Edge Clip Circle Adapters to help you. Simply clip it on the spool,…
Description I always wanted to make some improvement on Q2's foot support. The stock ruber feet are small and don't really seem to be capable of its weight (>25kg)，especially with fully loaded Qidi Box on the top, the total weight goes to…
Description The stock power supply for Qidi Q2 is 350W which barely powers the system. I personally replaced it with a 600W PS from MeanWell, Model No. LRS-600-24 . It's not mandatory, but a plus for better system operation. This model…
Everyone has wrenches. There are many wrench organizing solutions out there. However, I couldn't find one really suits my needs. The challenges were: I have more than one sets of wrenches which are in different sizes, shapes and types.…
Description In order to use my Qidi Box to print in multi-color while keeps at least one channel for external manual filament feeding. I personally have printed many Y-Splitters that I found on the Internet. Most of them were failed on…
Love the original design. Remixed to octagonal shape, so it's no longer rolling away on the table. Can use heat insert nuts (M3x3x4.2mm or M3x4x4.2mm) , no panic if you happened lost the nuts on site. Still can use regular Hex nuts as…
This set of mounting solution was originally designed for my wrench hanging system. Click to see Universal Stackable and Flexiable Wrench Hanger/Organizing System for more details. I am sharing it as an individual project since I think it…
These are all currently available results.
