Counting matching models…
A little holster to hold your Logitech Meetup remote on the wall so it doesn't get lost. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution: .2mm Infill: 20 Filament: HatchBox PLA White…
This is a dog treat dispenser based on the Judd Treat Dispenser code from NYCCNC. Project information available here: http://www.nyccnc.com/judd-treat-machine.html I modified the code so it controls a servo to dispense the treats. It's…
a little box to hold the 4 channel sainsmart relay. I printed it with a raft, and supports for the slots... i put both the box and the lid side by side on one raft, and it printed nicely :) i used the default settings for standard print…
Customized version of http://www.thingiverse.com/thing:117519 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=117519 Instructions Using the following options: Text_Size = 11 Text_Font = write/orbitron.dxf…
holds the two units nicely. :) I removed the ipod mount and just duplicated the base, and shrunk it down to 75mm long. :) print standing on it's end with supports. :) Category: Audio
just chopped it up, to suite my needs, thank you alTec0 for doing all the hard work. printed in PLA Category: Electronics
i broke the knob on my Tandy 1000 TL while taking the cover off. So I printed another one. press it into the Metal case hole, then into the 10K pot, use the cotter pin to hold it in place. and you should be good. :) works great. :) Print…
Customized version of http://www.thingiverse.com/thing:247231 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=247231 Instructions Using the following options: words = SOPHIE cone_top = 140 bowl_d = 127…
This is an enclosure for the Acorn Atom Recreation by Chris Oddys. This is for use with the Acorn Atom Motherboard designed to fit in an Electron case. I didnt have one so I designed my own case. I purchased the bareboard for the…
This is a small case for Lee hart's Z80 membership Card computer. It's designed to fit in an Altoids Mint tin. With the addition of the SIO/RAM/CP/M card, the Altoids tin was no longer tall enough to accomodate the stack of cards. So I…
Basically i created a block a bit thicker than the iphone 6s Plus with rounded corners, and Booleaned out some of the model. I also made a grove for the lense as it slides into place. and I also made the lense hole a bit bigger. :) I…
Lee Hart has made a number of cool little projects that fit in an Altoids container, which is pretty awesome. I created this little "retro" case for his latest Cosmac VIP2K. Check out his projects: http://www.sunrise-ev.com/projects.htm…
A rather tall stand for the logitech webcam pro 9000. prints on it's side with no supports. The Replicator 2 did a great job bridging. (first time I tried...) I added another stand, this one with a flat bottom that can be glued on top of…
Here are the files for both the lid and base for the VIP-S. The base can be used on it's own, if you prefer to display your VIP-S circuit board, or you can Print the Lid, and either use it with the base, or on it's own. :) Included are…
Customized version of http://www.thingiverse.com/thing:247231 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=247231 Instructions Using the following options: cone_bot = 130 $fn = 100 words = SOPHIE bowl_d…
Customized version of http://www.thingiverse.com/thing:44906 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44906 Instructions Using the following options: unit = 1 spool_hole_diameter = 19 spool_width =…
Customized version of http://www.thingiverse.com/thing:57810 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=57810 Instructions Using the following options: Cord_Direction = 1 Lettering = Sample Bends = 25…
This is an enclosure for Arno Puder's PocketTRS. It's an awesome project, so I thought I would show it a little love. there are 4 parts in total. two feet with pegs to be glued into the base, the base, and the lid. :) It's made to look…
Customized version of http://www.thingiverse.com/thing:1039106 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1039106 Instructions Using the following options: labelHeight = 20 textStyle = out textFont =…
I added a stand to this very clever design by Habales. printed at .1mm because of the tiny pegs to hold the raspi cam. 25% infill. I know there is no joint to pivot the camera, (next one will have that) but for now, i was thinking i would…
this is a raspberry bi mount for the makerbot replicator 2. I has an extended front where a raspberry pi cam can be mounted for monitoring prints... ( please note you have to adjust the focus on the little raspberry pi cam board) works…
This is a stand my buddy Josh asked me to create to showcase the 1974 CMOS FLIP game published in Popular Electronics May 1974. The game was created by Joseph Weisbecker (Famous creator of the RCA COSMAC 1802, and COSMAC ELF and COSMAC…
I flattened the mounting portion of the item I remixed, so it can be screwed down or extended with the extension piece i made for the original stand. :) i only included the changed STL file and the extension, the Original front and back…
Customized version of http://www.thingiverse.com/thing:109739 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=109739 Instructions Using the following options: RulerLength = 15 RulerText = Sir Wilfrid…
These are all currently available results.
