Counting matching models…
Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…
Loved the hot rod Ossum made so much I had to make one. I wanted it to be functional as an actual rock crawler so I put most of the weight up front and down low for steep climbs. I designed it to work with an axial ax10 wraith or scx10…
This 32? Ford cab is designed by Ossum (you can find his design in the remix area.) I Basicaly squashed it down 20% to make it look more rat rod like. And some other adjustments to fit it on to a SCX10 frame. His work is amazing! Some day…
1/10th scale accessory. these are 80lb and 75lb midsize tanks The wheel is for the cart, Cart is being made out of metal so there is no stl for that. standard phone wire has red and green wires that will be great for the hoses I think.…
These are some of the non functioning parts I made to mock up my designs, I suppose you could use them in a scale garage or something. They are as close as I could get to the actual dimensions. Parts are: rear ar60 axle, AX10 style…
Made this for modeling up RC Crawlers, Not sure how accurate the motor mount is I think the motor sits several mm too low, but it all seems close enough to me. Found a better picture for the motor mount, I expect everything is accurate to…
Built this to mock up parts on inside fusion 360, but haven't finished it yet. still needs all the mounting holes and such, but you may find it useful. Will update when finished. Added some mounting spots, sill not complete but I'm busy…
Updated this with standard mounting holes. The body is 2mm thick, it's too complicated for me to print, and no idea how strong it is. Also made it look more like the original. axial 3 gear ax10 transmission in 3d, no mounting points you…
Basically its an axial bomber hood with a big ol' motor sticking out of it. I use an older version I made that I had to grind away a bunch of material on, hopefully this one doesn't need any grinding. The front kind of clips on, but mine…
Made this front grill for my Axial r/c Ossum hotrod build. https://www.thingiverse.com/thing:2942759 It attaches to the stock servo mount on wraith ar60 or scx10 ar40 axles. It extends to hide some of the links too. so it does mout…
Need to have an rc car for your rc car? Will not work with Axial, wraith scx10, honcho, bomber, Vaterra Ascender, rc4wd, TRX-4, Redcat, G-made, HPI, ECX or any other rc car you can imagine! Obviously... Category: R/C Vehicles
Print on back, supports if you need them. I did not make any brackets to mount the circuit board, I threw all the Tenlog electronics away and use can-bus. I printed it on the quick with a 1.0mm nozzle and it worked fine. Remove the big…
This scale accessory is a bolt on air induction hood scoop with carburetors. The files are numbered for different angled hoods. 0, 2.5, 5, 7.5 and 10 degrees. The bolt holes are for m3 bolts and are 30mm apart Category: R/C Vehicles
an upgrade to Ascender body mounts for SCX10 II https://www.thingiverse.com/thing:3210534 These should be more universal to different lengths of bodies. part A screws to part B, separated for strength. Bumpers can be found here…
This is a front bumper / grill for an scx10 hot rod build. it includes a servo mount under the grill. I haven't printed it yet to know how well it fits, but it should be good. There is a pretty good remix of this over here…
Just a basic roof, I have not printed these myself, but I think printing them on their sides or rear down would work best. Unless your printer dosen't need supports Category: R/C Vehicles
Just a different style then the other. your 3d printing software should be able to mirror this thingy. Category: R/C Vehicles
Some Toyzuki v2 or v2.5 sliders, Might work with the rc4wd toyota hilux hard body. The body mounts end up 152mm apart and you need to drill them yourself. I don't have this body so I can't test it out. The forward sliders are probably the…
These are Rock sliders for the Toyzuki v2 and 2.5. They sit lower then the previous sliders I have made. Youtube Video https://youtu.be/JaMNlem1ttY Ugly video https://youtu.be/P-q0k2z9Xbc The nice thing about these is they are totally…
A pretty plain dash you can add to. This fits in the Bomber chassis pretty snug. If you go for the wraith interior and the ax10 transmission, this is good to go with that. Just drill it to add a steering wheel. here is a forum thread with…
These are doors I made, that have 3d vent things to make your car go faster :P The holes are too small and its a tad thin but it fits. I printed it with petg and is was flexible like a credit card. Category: R/C Vehicles
Cargo tray for axial bomber, Mounts to rear shock mount. I relocated my shocks to rear axle and Used one of the gas tank screws for the top shock. V2 can mount with stock rear shock configuration. and has thicker walls, and has hand holes…
esc for mock up. no wires Category: R/C Vehicles
This is a blank door, if you like plain, or bling it out yourself. Your 3d printing software should be able to mirror this thingy. Category: R/C Vehicles
Using this in a project to add a DeWALT battery to my remote so I don't need to use screws to remove this cover. I probably should use this to create a sliding door as well, more people would want that I imagine. Category: R/C Vehicles
I originally made these to drill out stock plastic wheels to fit on slw style hubs for 1/10th scale rc cars, but you could also use them as wheel spacers. Category: R/C Vehicles
Some Sliders I designed for my Toyzuki v2. I haven't tested yet. Thought I would share. They are 40mm wide each side, 80mm total. You can change the width in your slicer probably. Category: R/C Vehicles
Modified this well designed bumper platform to mount an ascender truck body to my SCX10 II. Bumpers can be found here https://www.thingiverse.com/Goodsons_Hobbies/designs The rear is a strong hinge joint and the front is a simple pinch…
Some Sliders I designed for my Toyzuki v3. I have tested them and they fit great. Thought I would share. They are 40mm wide each side, 80mm total. You can change the width in your slicer probably. I added a skid to mount the rc4wd Hilux…
Simple holder, made for use with zip ties but you can drill holes in to your hearts content to screw it into anything you want, preferably not pets. V2 Files dont have all the Zip tie Holes so drill your own Holes Category: R/C Vehicles
Wismec reuleaux charging base just add usb cable. Original fits Wismec DNA200, and original Wismec reuleaux RX200 with small screen. One fits Wismec reuleaux RX2/3. One fits Wismec reuleaux gen3. Center of of usb port is 10.5cm above…
Works with some 7in touch screen with the ears on top and bottom. I was off by 1mm (115 vs 116mm) for vertical holes but it mounted fine. like this one I got the measurements from one that didn't have a digitizer for touch but I think the…
These are all currently available results.
