Counting matching models…
A small stand made for catching drippings of hot glue from a glue gun. This model was designed specifically around a dual temp mini gorilla glue glue gun, but it should work with other small glue guns.
Brackets for joining 120mm fans together. Join fans in many configurations for different applications
Three stackable moss pole styles and base Each pole is 200mm tall. Print with a brim Some support may be required
80mm fan shrouds 30mm tall with 90-degree air deflection. Walls are 2mm thick in most areas of the v1 model. Walls of v2 model are about 3mm thick and requires significantly less support. I made this for the cooling fan in the base of my…
Aquaponic planter rack for the Top Fin Indulge Easy Clean 3 gallon Aquarium Set on top of your TopFin 3 gallon aquarium and grow some plants! Support required for the net pot.
A little axial flux generator made as an experiment for a vertical axis wind turbine. Fits on a 12mm shaft. It doesn't output much power but is a decent example nonetheless. You'll need a minimum build plate size of 200mm x 200mm to print…
A little cookie cutter in the shape of the logo for Michigan's football team, the Detroit Lions. Make sure you use a clean nozzle and food-safe filament for any prints that touch food. Right and Left facing versions now available.
Brackets for joining computer fans together. Supported fan sizes: 220mm 200mm 140mm 120mm 92mm 80mm 70mm 60mm 50mm 40mm
Two-Piece Lid for Mini Fish Tanks, 2.5 Gallon Aquariums.
A nice snowflake ornament for the holidays
A thing designed to be screamed into. The internal design is an experiment in waveform theory and the Huygens–Fresnel principle . The resulting shape was intended to dampen sounds in the 30Hz to 150Hz range, but instead seems to produce a…
40mm Fan Deflector for Type A Machines Series 1 3D Printer Comes in a six-fin design and an eight-fin design. 50 degree deflection No supports required Edit: added a thicker, redesigned 6-baffle deflector.
A small trellis for plants that can be stacked. Use a twist-tie, string, or zip tie through the small holes to join one trellis stacked to the next. Support touching the build plate required for the stakes. No support necessary for the…
Aquaponic planter rack for the Top Fin Indulge Easy Clean 3 gallon Aquarium Set on top of your TopFin 3 gallon aquarium and grow some plants! No support required
Protective cover for 92mm fans. 2mm thick.
Don't want your Voxelab Aquila glowing all hours of the night? This screen cover has you covered. Support required.
Small modular mount for two TB6600 stepper drivers and an 80mm fan. These mounts are designed to be connectable if more drivers are needed. Mounting holes for the drivers are 4.4mm in diameter. Mounting holes for the fan and the mount…
Fan shrouds for seven standard computer fan sizes: 120mm 92mm 80mm 70mm 60mm 50mm 40mm Two Sets included: Fixed height set at 22mm Proportional set where height is equal to the fan size divided by pi. Support Required.
An 80mm fan cover to redirect air flow. One centimeter tall. Screws onto an 80mm fan with typical pc fan screws. Two styles available. Some support may be necessary.
A holder for dry erase markers to hang on top of little white boards. The white board I made this for is about 7mm thick.
Small bracket to mount a Schurter C14 Power Receptacle. Does not require support. Mounts with M3 screws. .stl and .step files provided.
This is a modified lower grille panel for 1st gen scion xBs. This is not an exact copy of the original, featuring its own geometric hex design distinct from the OEM design. Front Grille Assembly for 1st Gen Scion xB (2004 - 2006) Part #:…
A magnetic corner clamp to assist with box-making. Included are models for captive magnets that require pausing the print to insert, or models for slide-in magnets that are inserted after the print is complete. Note: it is recommended to…
Seam Allowance Discs for sewing from 1/4" to 1" size.
Pilot holes are 1/8" inch for #9 screws that are 3.5 inches in length. Meant for joining two-by-fours perpendicular to each other. Two pilot holes for if/when one of them gets worn-out.
A small, easy to print clip for routing wires on dropped ceilings. Passthrough is one centimeter in diameter.
Enclosure for the B0205 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam with IR LEDs Made to hang from the frame of my Type A Machines Series 1 3D Printer. Some support required for the front plate. Four tiny screws are…
Front Grille Assembly for 1st Gen Scion xB (2004 - 2006) Remixed from jawhnbot's thing 5470117 Channels in the back for led light strips. Toyota Part #: 52133-52051 & 52134-52051 Support required
A double-decker tray system that can be mounted to a wall or other vertical surface. Two holes in the back to mount to a wall with screws. No supports needed.
A pocket pinball design based on old-timey pinball machines. Requirements: x1 M3 machine screw preferably 20mm or longer x1 compression spring that can fit over the screw (some pen springs will fit) x1 M3 nut, preferably a lock-nut type…
Little Model of the iconic IBM 729 Magnetic Tape Unit A hollow version of the model that can be used as storage can be found here . The original model is 200mm tall, but you can scale down in your slicer as you see fit.
A small stackable trellis with a hexagonal pattern for plants. The Base and Stakes should be printed without supports, but the addon does need support. The addon model is installed by sliding it on top of a lower section. The addon has…
Glasses frame designed around using two 40.5mm polaroid polarized lens filters for seeing through water and glass reflections. The lens filters are press-fit. There are slots at the top of each lens to allow easy rotation with a finger.…
Modified Gripper for the BCN3D MOVEO Robot Arm I thought the original MOVEO robot arm gripper could use a little improvement. This design gives the arm a softer grip on objects. 50%+ infill recommended.
A tuning wrench for the music maker lap harp. Recommended 100% infill with a durable filament.
This desktop air filter design utilizes four 120mm x 120mm x 25mm computer fans to suck in air that passes through two HEPA filters. You will need: A minimum 200mm x 200mm build plate 8 M5x10 PC Fan Screws About 1kg of filament at 15%…
Eastern Michigan University Eagle Keychain Charm Original size is approximately 80mm x 70mm x 2.5mm
A birdhouse in the shape of an egg. The model is approximately 17cm tall. Comes in three mounting options: hanging, screw, and magnetic. The hanging version uses rope or string looped through the top. The hanging version has a top and…
A compact case to mount six TB6600 stepper drivers. Two 92mm fans can be added to both ends for improved air circulation. Hardware for mounting the stepper drivers to the base plate: x12 10mm-long M4 screws x12 M4 nuts Also included are…
A Small Nail Polish Magnet Holder. Magnet used is a 30mm x 10mm x 3mm neodymium bar magnet. Print with its side on the build plate for better durability. Support and high infill required.
This is a completely redesigned z-axis leadscrew knob for the discontinued Type A Machines Series 1 3D Printer. It has the Type A Machines logo on the top, solid hub to hug the lead screw, and a more aggressive design for grip as well as…
Preface: I am very new to t-spline modelling and this is my first attempt at a model so curvy and wavy. A little sculpture that is supposed to be a drop of water splashing on the ground. Good size to hold business cards.
A pen cup with a diamond pattern. No support required, 100% infill recommended.
A pilot hole guide for drilling consistent 1/8" holes into the ends of 2x4 lumber (actually 3 ½" by 1 ½"). Two model versions: Align with the corner of the 2x4 or the sides of the 2x4. Three holes: Middle hole is center and the two outer…
It's a sheriff pet tag for your pet! Scale and Emboss your tag with your pet's name in prusa slicer!
A small cabinet shelf support that fits in an 8mm pilot hole. Designed to use minimal material and no printing support. 100% infill recommended.
Check-in with how you feel with this mood dial / barometer. Two recesses in the back for two 15mm-diameter, 3mm-thick circular magnets; glued into place/ Dial is held in place with two 6mm-diameter, 3mm-thick circular magnets; one magnet…
A model of an IBM 729 Magnetic Tape Unit for storing coins, pens, etc... Top lid is to be glued on. Two top lid styles available; piggy bank and solid lid.
Small bracket mounts for the SEN0208 Weatherproof Ultrasonic Sensor Module . Mounting screw hole size is 4mm in diameter.
A painting palette with a hexagon shape theme. Recesses for five separate colors and a recess in the middle for mixing.
A little weather vane made out of circles. You will need: Minimum 200mm x 200mm Build Plate x1 6001 Ball Bearing Glue Assembly: Print the two sides of the Vane Glue the two sides together Print the base Insert 6001 ball bearing into the…
Keychain Case for a Darkdawn UV Flashlight It's a tight fit, you really have to squeeze it in there!
A small organizer for devices and documents. I made this to hold my various calculators, but it can be used to hold / organize many items such as phones or documents. It can also be situated on any of its sides. The dimensions are 184mm x…
A Knob for a Kitchenaid toaster; fits inside of a potentiometer that controls toasting level. Print with supports with the front and back along the x-axis or y-axis for max strength. Preferably use a filament material that is heat…
Two small printable models to convert the Y-Axis rods to MGN9 Linear Rails on Monoprice Select Mini 3D Printers; especially helpful if your y-axis linear rods are worn out. This design was inspired by Paroni's Monoprice Select Mini V2…
My laptop wasd keys get really hot when playing video games, to the point it sometimes burns my fingers. This little fan duct remedies that by cooling my Acer Nitro gaming laptop keyboard, blowing air over the surface. It uses three 40mm…
Panel mount case to cover a Meanwell PSD-30 series DC-DC converter. Cutout patterns on the sides and top to encourage airflow. Cutout for an optional 40mm fan for active cooling.
Yuasa YTZ10S battery case for 1983 Yamaha Virago XV500K Motorcycle Hardware required for assembly: 4 pcs M6 x 100mm bolts for the frame 4 pcs M6 lock nuts for the frame 2pcs M5 x 20mm bolts for the base 2pcs M5 standard nuts captured in…
A shade to fit over 6" ring grow lights; specifically these 6" Yadoker Grow Lights found on Amazon. There are two models that can be used to block light from scattering (shade model) or diffuse light with a translucent printing material…
A small bird feeder that mounts using 12mm x 3mm circular magnets. There are recesses for eighteen 12mm x 3mm circular magnets used for mounting on metal surfaces. There is also an additional ring for eighteen 12mm x 3mm circular magnets…
A Collection of Monoprice Select Mini Side Panels with a combination of features. Vented side panels for extra air circulation Left side panel with 40mm fan mounting point Left side panel with C14 power connector for internal power supply…
1983 Yamaha Virago XV500K Gas Tank Damper Bushing Damper, Locating 2 - PN 22U-24182-00-00 No support should be necessary. Use TPU filament for proper application.
Desktop wireless charger case using a Wireless Charging Module from a Toyota. This is not a practical design by any means because the charger used is prohibitively expensive, but perhaps someone can find use in it or remix the model. You…
Replacement stand for Styli Cosmetics LED Mirror
These are all currently available results.
