1 / 3
Two-by-Four Pilot Hole Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pilot hole guide for drilling 1/8" holes into the ends of 2x4 lumber
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A pilot hole guide for drilling consistent 1/8" holes into the ends of 2x4 lumber (actually 3 ½" by 1 ½").
Two model versions: Align with the corner of the 2x4 or the sides of the 2x4.
Three holes: Middle hole is center and the two outer holes are spaced third of board's width.
Has a little ruler on the side divided into 1/8" increments.
Extrusions on either side to put up against the board being drilled, lining-up the holes to center.
Supports shouldn't be required.