Counting matching models…
Inspired by "Dachshund eppendorf tube holder" by jrletourneau ( https://www.thingiverse.com/thing:3116138 ) I designed this tube holder which holds 6x 1.5 mL Eppis. Made in Fusion 360. Because cat people do lab work too. Enjoy. EDIT…
My Makita Vacuum started cracking on the top part, so I quickly printed this reinforcement part. Designed for Makita DCL180ZB. Enjoy.
This is a special 50 mL Tube Rack. It is able to store up to 9 tubes at once and it was designed with compact storage in mind. Ideal for storage of samples in small fridges and tight spaces. For this design, my goal was to make it as…
This is my attempt on making a fully 3D printable remix of Push Latch Mechanism by c_bot which I believe originated from Push Latch Mechanism by Coffreedom_Official - Thingiverse . After some tests I did with springs I designed using the…
This is a remix of the presence sensor originally designed by @FSquare_1622667. I made a few tweaks to suit my needs: Replaced the original screws and inserts with plastic screws (I didn’t have the metal ones at home). Thinned the walls…
Materials needed 2x Compression springs --> 10 mm diameter / 50 mm length 4x Tension springs --> 4 mm diameter / 30 mm length Double sided adhesive tape 3D printed parts How to Print All parts are oriented in the right direction All 6…
For this model I tried to replicate a model of a cat from a book stand I found on amazon. It was meant to be a present, and I wanted to write text on it, so I tried recreating the shape of it in Fusion360. I also didn't like the glasses,…
I modified to original design to fit my ZTE Nubia Red Magic 3 and my Fossil Sports smartwatch. I use round magnetic cables for all my devices because I can use fast charging with them, and it is almost as easy to use as wireless charging.…
This is a adapter piece to convert the standard brush head which comes with the Dyson DC45 to fit on the Makita DCL280FZ. Recently my old Dyson died so I decided to buy a Makita vacuum instead since I wasn't really a fan of the short…
Simple 2D Model of a Bird on a tree branch
Instructions: Buy a 25 mm, 30 mm, or 40 mm elastic band depending on your personal preference. The recommended length for one belt is around 100 cm ± 20 cm. For example, you can use Auckpure 20 Metre Rubber Band Black Width 10mm 20mm 30mm…
Based on the original design ( https://www.thingiverse.com/thing:2670912 ) I made myself a X Y direction helper. Hope it helps you too. Enjoy.
This is a replacement part for an insect screen door handle. Mine broke so I designed a new one in Fusion360. Hope this helps someone. Enjoy.
This is my customizable air freshener cover. It consists of 4 pieces. An inner shell, an outer shell and a button which is made by gluing 2 parts together. Also, a standard air wick spray can is needed of course. By pressing on the big…
⭐TLDR: This is my attempt at creating the smallest footprint 18650 battery cell-based battery pack. 18650 Li-ion cells have a lifespan of approximately 300–500 cycles. Therefore, it is very important to me that they can be replaced…
How to use? Find the right size for your toilet paper rolls first. If you are uncertain just use the bigger one, it can be used for both sizes. There are 2 sizes. One for max 120 mm outer diameter toilet paper rolls and one for max 110 mm…
⭐ Instructions: 🔹3D Printed parts: 1x Housing Base 1x Housing Top 1x Fan Blades 1x Fan Duct 3x Screw 3x Nut optional: 1x Rubber Gasket optional: 1x Cutting Stencil 🔹Print Settings: All parts print without support except Housing Base All…
Zuhause ist dort, wo sich dein Herz wohlfühlt - Schild
This is a matrix inspired picture frame I made. I used a free online SVG converter and Fusion360 to create this model. I cut the model into 6 pieces since it was too big for my printer. The puzzle is from an old Lootbox. Enjoy.
I noticed the whole rack tipped when only one tube is placed on one side so I fixed that.
Changes: Removed one tube stand to make Tube rack use less space if put in freezer. One tube rack now hold only 9 tubes! Removed Print Helper between Legs for faster assembly (Print helper is not needed when printing in PETG with good bed…
A stencil I made from the music video of K/DA's "POP/STARS". I modified some parts of the original artwork to make it print in one piece. I printed the model 0.4 mm thick (2 layers). I used prisma tech perma spray glue on one side and let…
I recently bought a Luxe Bidet Neo 185 . It's hard to install in a European toilet but much cheaper and more environmentally friendly than installing a whole new toilet just to have a bidet. After installing the bidet, the feet at the…
Just a simple parasol adapter I made for myself. It consists of 2 pieces. One bottom piece and one top piece to give the whole construction rigidity. Both should slide in the outer shell pretty easy. The inner side is a bit tighter.…
This is a upgraded version of the MMU2 filament control (attempt 1) by pmeyer. https://www.thingiverse.com/thing:3184377 NEW FEATURES: .) Added holes on the back side the keep the acrylic sheets in place. .) Added part "Plates holder"…
A wall mount for the Ekey Uno Fingerprint I designed. The door lock can be bought on amazon:…
A replacement for the standard squared nut of the CR-10 Spool holder. In the past I had trouble with some spools falling off the filament holder, but I didn't want to lose the ability to quickly swap spools by using a bigger nut. So, I…
Recently I bought this Multifunction Straw Tubes Dust Brush from Aliexpress and it didn't fit my Makita Vacuum. So I designed this simple adapter. Link:…
What you need: 1.) IKEA 365+ Food container, rectangular/glass, 1.0 l - IKEA Austria 2.) Food grade silicone for molds. e.g. Wagner sil 26 LE Premium Silicone Rubber Duplicating Silicone Food Grade 1 kg : Amazon.de: Home & Kitchen 3.)…
Recently I made a holder for the keypad of my new smart door lock. I printed this on my MMU but this can easily be printed in two parts and glued together. The beveled edge around the device is on purpose so it cant be knocked off or…
Print in TPU95A recommended! Use with these Silicone ear tips! 3 Sets (S/M/L) Anti-Slip Silicone Eartips Earbuds Eargels for JBL Synchros Reflect BT Sports Wireless Headphones : Amazon.de: Electronics & Photo In-ear 3 perechi Accesorii…
This is a replacement part for aluminium screeding level caps, in case yours break or as in my case you want to cut one of them into 2 pieces and need a way to cover the ends. They should fit perfectly without any glue depending on the…
Simple 2D image of a Witch on a broomstick
Had some problems around the boots printing the original model.
Features Distributes clamping force over a larger area Rounded corners reduce the risk of tearing or cutting into fabric Can be glued to the clamp to prevent it from falling off Compatibility Designed for this clamp: Pack of 10 Nylon…
So, I ordered this megaphone on aliexpress, but it didn't come with a handle nor battery compartment. https://de.aliexpress.com/item/32686557652.html?spm=a2g0s.9042311.0.0.27424c4db2ykbb That's when I decided to create my own. This was…
Just a simple heat warning sign which can be put on hot surfaces e.g. hot plates or any other heater to get a visual indicator for the temperature. Print in colour changing filament like:…
This was an old project of mine. No instruction unfortunately, if you need help feel free to ask. 😊
Summary This is a practical guide on how to keep your 3D printing filament dry with as little effort, cost, and power consumption as possible. I will compare different drying and storage methods and explain what actually works long-term.…
These are all currently available results.
![Fully 3D Printable Push Latch Mechanism [WIP]](https://media.printables.com/media/prints/534635/images/4312911_d1e5ac34-6e42-4e03-944a-55b63a61da6b/photo_-_google_photos_-_google_chrome_2023-07-24t11-14_hql.png)
