Toilet Seat Bumper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Default and extended (+7 mm) bumper for toilet seat with Bidet.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
I recently bought a Luxe Bidet Neo 185. It's hard to install in a European toilet but much cheaper and more environmentally friendly than installing a whole new toilet just to have a bidet. After installing the bidet, the feet at the back were about 7 mm in the air. So I designed my own. I also replaced the default ones to make them look uniform. They fit tightly but can be removed with a sharp object.
If you are interested in which parts I used for the bidet Installation:
Toilet Brand: Geberit
Print settings
Printed in TPU 95A (flexible filament) with 100% infill for durability
Printed with the 3 knobs touching the build plate
Add a thin support ring around the perimeter for stability
No additional supports required
Notes
Designed for a 7 mm lift – can be scaled if needed
TPU recommended for flexibility, but PLA or PETG may also work
Feet are press-fit under the bidet, no adhesive needed