Counting matching models…
UNIVERSAL PEG FOR IKEA SKÅDIS – one peg for my whole organizer system This peg is the mounting system for all my SKÅDIS holders and organizers. The holders are designed around it, so they print without supports and their entire back sits…
Your digital caliper safe on the wall instead of loose in a drawer. A caliper holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features…
Pick the size that fits: storage containers in 18 sizes for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features 18 sizes For cable ties, pens, small…
The original IKEA bin is too small? Here are three sizes, from the original size up to long. Bins for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.…
Your scissors always in the same spot: grab them and put them back with one hand. A scissor holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.…
The short version of my mounting peg for IKEA SKADIS pegboards. Features Prints without supports in its strongest orientation The whole back of the holder sits flat on the board Compatible holders SKADIS Scissor Holder SKADIS Pliers…
Fun and simple cat toy. Either the cat can play with it alone or you play with her. (makes even more fun). The toy rolls through its shape very unevenly which stimulates the cat even more to play. Works with my cat really great. The toy…
First part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests. The reason for a separate peg from the organizers is that it enables you to…
Your pliers on the wall, ready to grab, instead of buried in a drawer. A pliers holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features For…
Get your controller off the desk and onto the wall. A controller holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Designed for the…
Water scale hook for the ikea Skadis board. Easy to print, very stable. If you would like to see more of my designs for the Ikea Skadis board, I have created a collection here: Skadis hardware I'm always happy to receive feedback!
Simple, sturdy hooks for IKEA SKADIS pegboards. More for your SKADIS board SKADIS Long J-Hooks – 50, 75, 100 mm + double hook SKADIS Spirit Level Hook – for spirit levels SKADIS Cable Comb + Cable Hook – 7 slots plus hook for coiled…
Multimeter on the wall, upright and ready to use. A holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Frees up space on your workbench…
Safety glasses right next to your tools, so you actually put them on. A holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features For safety…
Your solder reel on the wall, ready to pull solder from. A holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features For solder reels Mounting…
The folding rule always within reach. A holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Fits a standard 2 m folding rule (Zollstock)…
Adaption des bekannten Scott’s iPhone Standby Mode Docks , angepasst für Google Pixel Geräte. Kompatibel mit: Pixel 9 Pro XL Pixel 10 Pro XL Funktionen: Verwendet das Anker Zolo Magnetische kabellose Ladepad (ca. 15 € bei Amazon )…
Bring some green to your pegboard. A pot holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Fits 9 cm IKEA FEJKA pots Mounting Mounts…
No more solder sucker rolling across the bench. A holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Fits solder suckers (desoldering…
I designed this 45 Record Adapter in Fusion360 for the Printables 45 Record Adapters contest. The dimensions are as required: 1.5 inches(38mm) around with a .25 inch (7,3mm) hole in the center.
I designed this 45 Record Adapter in Fusion360 for the Printables 45 Record Adapters contest. The dimensions are as required: 1.5 inches(38mm) around with a .25 inch (7,3mm) hole in the center.
A small shelf for the things that have no better place: glue bottles, sprays, tape. For IKEA SKADIS pegboards. Features For a bigger version in three widths, see the Shelf Set below More for your SKADIS board SKADIS Shelf Set – 88, 168…
This is for the BantaMount. I designed a bracket to attach a CR-Touch to the standard BantaMount. X Offset from nozzle +/- 39mm Supports: No supports needed Infill: Shouldn't matter Material: Shouldn't matter Website for the mount:…
Storage bins in three sizes for IKEA SKADIS pegboards, with a label field on the front. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Sizes S, M and L Label field on…
Tip it forward, grab what you need, and it swings back closed by itself. A tilt-out bin for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features…
Every drill bit from 1 to 10 mm in its own labelled slot. A stepped drill bit index for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features 19 slots…
A round pen cup in two sizes for IKEA SKADIS pegboards, for pens, markers and brushes. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Two sizes Prints without…
Grab a glue stick and the next one rolls forward automatically. A gravity-fed hot glue stick dispenser for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without…
A shelf in three widths for IKEA SKADIS pegboards, for sprays, glue and small tools. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Widths 88, 168 and 248 mm For…
Take a battery from the tray and the next one rolls forward automatically. A gravity-fed battery dispenser for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without…
Ten screwdrivers within reach. A screwdriver holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features 10 slots: 5 × 6.5 mm and 5 × 10 mm…
Long, stable hooks for IKEA SKADIS pegboards, for everything that needs more depth than the standard hooks. Features Lengths 50, 75 and 100 mm Double hook (70 + 30 mm) included Easy to print, very stable More for your SKADIS board SKADIS…
A cable comb and a hook for coiled cables for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Cable comb with 7 slots Cable hook for coiled…
Every hex key in its own labelled spot. A holder for metric hex keys (Allen keys) for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Sizes 1.5,…
All your SD cards, microSD cards and USB sticks in one place, sorted and labelled. A rack for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features 8…
A small cabinet with 2 drawers (80 x 68 x 43 mm inside each) to mount to an Ikea Skadis pegboard. Perfect for screws, small parts, SD cards or anything that should stay out of sight. Insert the pegs through the upper compartment before…
A holder for super glue (cyanoacrylate / CA glue) bottles up to 38 mm diameter to mount to an Ikea Skadis pegboard – single and double version included. Keeps the bottle upright and the nozzle clean. Two of my Universal Pegs are already…
Your screwdriver bits sorted and within reach. A holder for 24 standard 1/4" (6.35 mm) hex bits for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.…
A headphone holder with a wide curved saddle for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Wide curved saddle protects the headband For…
Your phone or tablet on the wall, charging and always in view. A 150 mm wide shelf for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Fits…
A holder for the Steinel MobileGlue MG 1007-S cordless glue pen to mount on an IKEA SKÅDIS pegboard. The pen slides in from the top, nozzle down, and wedges itself between the side walls – two quivers on the sides store 4 spare 7 mm glue…
These are all currently available results.
