IKEA SKADIS Glue Stick Dispenser – 7 + 11 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gravity-fed dispenser for hot glue sticks (7 x 150 mm and 11 x 200 mm) for the IKEA SKÅDIS pegboard.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 15
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Grab a glue stick and the next one rolls forward automatically. A gravity-fed hot glue stick dispenser for IKEA SKADIS pegboards.
Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.
Features
Load from the top, a curved ramp rolls the lowest stick into the tray
7 mm version: sticks up to 150 mm, about 12 sticks
11 mm version: sticks up to 200 mm, about 9 sticks
Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.
More for your SKADIS board
SKADIS Battery Dispenser – gravity-fed, AA and AAA
SKADIS Drill Bit Index – 19 labelled slots, 1–10 mm
SKADIS Screwdriver Holder – 10 slots, 6.5 and 10 mm
SKADIS Bin Set S/M/L – three sizes with label field
SKADIS Tilt Bin – flips open, closes by itself
See all of them in my collection: Skadis hardware
If you print it, I'd love to see a photo in the comments or as a Make!
