1 / 5
IKEA SKADIS Glue Stick Dispenser – 7 + 11 mm — zdjęcie 1
1 / 5

IKEA SKADIS Glue Stick Dispenser – 7 + 11 mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gravity-fed dispenser for hot glue sticks (7 x 150 mm and 11 x 200 mm) for the IKEA SKÅDIS pegboard.

Ocena
0 / 5
Polubienia
6
Pobrania
15
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Grab a glue stick and the next one rolls forward automatically. A gravity-fed hot glue stick dispenser for IKEA SKADIS pegboards.

Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.

Features

  • Load from the top, a curved ramp rolls the lowest stick into the tray

  • 7 mm version: sticks up to 150 mm, about 12 sticks

  • 11 mm version: sticks up to 200 mm, about 9 sticks

Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.

More for your SKADIS board

See all of them in my collection: Skadis hardware

If you print it, I'd love to see a photo in the comments or as a Make!

Tagi