IKEA SKADIS Drill Bit Index – 1–10 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Labelled stepped holder for 19 drill bits 1–10 mm (0.5 mm steps) for the IKEA SKÅDIS pegboard.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Every drill bit from 1 to 10 mm in its own labelled slot. A stepped drill bit index for IKEA SKADIS pegboards.
Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.
Features
19 slots from 1 to 10 mm in 0.5 mm steps
Every size is engraved
Small bits in the front row, large bits in the raised back row
Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.
More for your SKADIS board
SKADIS Hex Key Holder – labelled, 1.5–10 mm
SKADIS Screwdriver Holder – 10 slots, 6.5 and 10 mm
SKADIS Caliper Holder – for digital calipers
SKADIS Bin Set S/M/L – three sizes with label field
SKADIS Tilt Bin – flips open, closes by itself
See all of them in my collection: Skadis hardware
If you print it, I'd love to see a photo in the comments or as a Make!
