Counting matching models…
Remixed from a design on Thingiverse and modified to have a slightly shorter length to also accommodate vertical displays for small tablets. Print settings Layer height: 0.20mm Infill: 20% No supports needed, print in the default…
Remixed for 13mm spacing. Letters: A to Z Numbers: 0123456789 Special: $!?%&. Use Extra Pins for reference or your own custom designs for 13mm spacing (1 or 2 pin variations) Print slow! __________________________________________________…
Remixed from ToolsToMars ' design to add more geometry to the loonie to make it smoother and also ensured both models were flush to the print bed (loonie was raised slightly when brought into a slicer) Print Settings I opted to used…
Simple design for replacement enamel pin backings. This is made to be printed with flexible TPU to allow pins to grip. Pin hole is about 1mm diameter and should accommodate most standard pins up to 6mm depth. TPU Print Settings Nozzle…
This is an A5 notebook template for dot-matrix and lined pages. Spacing between dots and lines are 5mm Holes are 2mm wide and should accept most pencils/ballpoint pens. I've included a blank STL as well as the F3D file if you wish to…
This print was created using the Rugged Box (Parametric) design by @Whity (thank you!). Designed for the Logitech G502 Lightspeed Wireless Mouse and to be fitted with the molded cardboard insert from the original box's packaging (see…
Simple phone mount to attach to the bottom of your kitchen cabinets for easy hands-free display. No additional hardware needed. Mount can be removed easily or it can be rotated 180 degrees to hide in the cabinet when not in use. The mount…
A 1x1x6 Gridfinity bin designed to hold your gluesticks or other items with a 30mm diameter. For reference, this will fit a 40g Elmer's Purple Gluestick. Hole diameter: 30.8mm Hole depth: 35mm I'd recommend using a magnet base for better…
A remix of a remix, handle design was from anderfrank that I modified to be a bit stronger and without the need for supports. Original pouch protector design created by GangStead Print settings: Perimeters: 8 for a strong uniform print…
Same design from caw242000 's made with rounder edges. I've also made a version of this stand that is compatible with the Gridfinity system here: https://www.printables.com/model/381936-spotify-car-thing-gridfinity-1x3
Storage for the Leatherman Signal compatible with the Gridfinity system by ZackFreedman . Grid size: 1x3x6 Note that fitment was designed with the pocket clip installed. Depending on which side you display, the Leatherman will orient…
Created for the Sovol SH01 Filament Dryer to allow smoother filament feeding through the top outputs. A simple M6 nut and bolt fastener that is hollowed to accept 4mm bowden tube pass through (1.75mm filament). The tube is press-fit, but…
A simple cold shoe clip to easily attach your small camera accessories to your belt, pocket, backpack, etc. Disclaimer : This is NOT recommend for mounting anything heavy such as speedlights or cameras. This is intended for…
Never forget what film you loaded in your cameras again! I designed these display cards to go into your camera's memo holder to remember the film you have loaded. Includes popular film stocks from Kodak, Ilford, Fujifilm and CineStill. If…
Simple hotshoe covers remixed from metalsepp for film cameras to remember what type of film stock is loaded: Colour (RGB), or Black and White (BW) Also included blank STL if you just want a basic cover and CAD file for your own customizing.
Remixed with a couple modifications from the original design by Tchitchi . Flipped X axis to give access to the charging ports on the other side for wired operation. Widened the screw-mount hole to accommodate the original Raleno hot-shoe…
Mounts designed for 22mm handlebars to hold a speedometer. Remixed from koubekt on Thingiverse . Required hardware: 4 x M6 hex cap screws x 35mm 4 x M6 nuts You can optionally add rubber strips in between the mount and the handlebar to…
A remixed stand for the Spotify Car Thing with a Gridfinity compatible base. Grid size: 1x3 Stand is available without the Gridfinity base here . Original stand created by caw232000 Gridfinity system created by ZackFreedman
This mounting plate merges the light box holder originally created by Tchitchi with the modular film scanner system created by RODSGEAR . The plate slots into the light box holder and 6x1.5mm magnets can be glued in to connect the film…
I made this for the Structube Campbell Sectional L-Shape Couch . This may be compatible with other modern couches but YMMV, check yours for dimensions and angles, this will slot between where the two sectional parts meet (see photos).…
A lightweight battery recycling bin that measures 10 x 10 x 9.6 cm Print settings 0.3mm layer height 2 walls (0.4mm nozzle) or Vase mode (0.6mm nozzle or larger) Bottom layers 4 Uses about 49g of material
Dock for the Steam Deck, remixed to accommodate this DockTeck 5-in-1 USB-C Hub Supports are required.
I wanted a headphone mount that was discrete and didn't take up a lot of space. This mount is designed to fit into the IKEA MALM Desk replacing one of the plastic end-caps on the inner side panel. Mount supports headphone bands up to 60mm…
A button guard to protect the Darkbeam V5 UV flashlight from accidentally turning on. This light gets hot quickly and the power button protrudes from the back, so I made this as a safeguard if travelling with this in your pocket/bag.…
This organizer tray was made for the Wacom ExpressKey , along with the pen and pen holder for the Wacom Cintiq Pro 24 Touch tablet. Rear slot allows the controller to charge to via USB while in the tray. There's a space in the front for…
I created a TPU protective bumper case for the LaCie Porsche Design External Hard Drive USB 3.0 version, sizes 1-2 TB. Hard Drive Model No: P9220 (or the similar later versions, LAC302000, STFD1000400, etc) Hard Drive Dimension: 77mm x…
These are all currently available results.
