Counting matching models…
Fully open source STEP files Please remix and share alike I'm sorry that all the files are not better sorted, labelled and optimized. 6x12 is designed for Fujinon SWD 65mm lens 6x17 is designed for Fujinon SWD 75mm lens 6x24 is designed…
DO NOT GLUE THE TOP FILM RETAINER It should be loose so you can slide film in/out. Use a dummy sheet of film to get the tolerances right before permanently gluing together. Open source with STEP files 26.02.23 Updated to v3 Light proof…
Line holder for fly fishing, with belt clip. Mirror it in your slicer if you prefer have it on your right side. Uploaded v2 in step file, easy to edit yourself.
Print in 95A or 98A TPU. Work well against even tough weeds. Will not break from barely touching rocks or concrete. Tip will wear down instead of the entire blade exploding. They are a bit wider at the base, so will be a little more…
Recommend to print this with a big nozzle if you plan to print large ones. 0.8mm nozzle or larger with max layer height, which is usually 75% of nozzle diameter. So 0.6mm layer height with a 0.8 nozzle.
--- 04.01.20 update II --- Added first test image. No light leaks! Even without any light foam seals around the film holder. Should still be added though, to increase distance to lens, so that infinity is in focus. Infinity is now in…
10.06.25 Uploaded new complete version with front swing and rear shift. 21.10.24 Made a new front standard with swing and much more stiffness. The carbon tubes are not recommended. Print the new towers in some very stiff plastic, like…
Added some more print surface to the tips of the blades so that it won't warp during print. These things are probably best printed in ASA, so that it's UV resistant.
--- UPDATE --- 28.12.19 --- Increased the cubes' size slightly (0.813 ---> 0.815), so that perimeters are slightly intersecting. Got feedback that some of the perimeters were printing in mid air, should be fixed with new version 3. -----…
A 120 film tag slot holder to remind you what film is in the camera. I recommend printing this standing, with the slot opening up. I use a 0.4 nozzle and 0.1 layer height. This seems to work fine. Glued mine on with epoxy glue. Print with…
Print in vase mode. Use large nozzles for reduced print time. For example: 0.8mm nozzle, 0.6mm layer height and 2mm extrusion width 1.2mm nozzle, 0.7mm layer height and 2.5mm extrusion width etc Remember to slow down print speed. It's…
Fits Arca-Swiss and RRS type tripod heads. Remember, this is plastic. Still, it holds my camera + 300mm lens in vertical orientation. Please remix and improve this. I uploaded 123D Design save file as well. Print instructions Category: 3D…
Open source with STEP files Uses M4 and M3 hardware, but you can edit this yourself. 2x M4 brass threaded inserts 2x M3 brass heated inserts 2x 15mm or 20mm M3 bolts for the film winder knobs 2x 20mm or 25mm M4 bolts for the knobs to keep…
The the female part of the arca swiss style quick connector. With built in supports. Print at 0.2mm layer height, 0.4 or 0.6 nozzle. Blue part goes on tripod head, while red part goes on tripod itself. Have not tested tolerances yet, so…
Inverted and made it more shallow. To use as thumbscrews on the Goodman Zone camera, for fastening the film back and ground glass frame. Print instructions Category: 3D Printing Print Settings Rafts: Doesn't Matter Supports: Doesn't…
Film advance lever for the Fujfilm 6x9, 6x8 and 6x7 rangefinders. Modern III type. Will not fit older models. Print instructions I print mine in 0.1
A simple "hat" for you 4x5 filmholder to avoid light leaks. Especially useful for very long exposures. Print instructions I printed mine in black ABS, but any opaque filament is suitable.
A stand that for the Analogue Pocket, compatible with the Analogizer. Recommended print orientation Print with a brim to minimize warping.
Enclosure for the SNES SNAC adapter that came with the second batch of the Mister Pi. 6 x 20mm M3 bolts 6 x M3 heated inserts
The small hole on one of the sides is used for my berd-air cooling pipe. Made a version that fits the v4.0 effector design.
Download the original STL files for the smooth non-air vented block.
Uses M3 nuts and bolts. 4x 40mm and 4x 10mm. I've printed and tested it, and it fits for me. Ended up not using it since I couldn't get the board to work. No fan for the steppers, but inluded the STEP file so you can easily modify it if…
Remove 49mm filter from it's metal ring and glue it to the model. Glue in 4x1.6 magnets in the holes. Uploaded a revision, easier to hold with tweezers and larger opening for filter. Magnets should "clip" in place, but will still need to…
Inverted and made it more shallow. To use as thumbscrews on the Goodman Zone camera, for fastening the film back and ground glass frame. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1 Infill: solid?…
Added a chamfer for more comfortable handling
Made in FreeCAD. Deep enough so that the aperture engagement pin doesn't collide with the cap. Chamfered both top and bottom for more comfortable handling.
Small plate that can be used with arca swiss style clamps, but also 3/8" mounts or 1/4" with adapter
These are all currently available results.
