Counting matching models…
I loved BenignVibes's tie hanger design but found it a little cramped, and wanted to store more than 8 ties. So I recreated the design in FreeCAD with wider tines, more space between them, and using a parametric model. You can edit the…
A hook for holding grocery bags upright in your trunk. Provided in 6 different lengths and 4 seatback depths for cars with different trunk depths. Choosing a length To determine the length required for your car, grab a grocery bag, throw…
Recommend printing at 0.2mm layer height, with 0.6mm wall line width (using either a 0.6mm or 0.4mm nozzle should work) with 3 walls, this will result in 0 required infill and solid walls. It should also work fine in vase mode.
The Minisforum MS-A1 is an awesome low power motherboard case combo, but the cooler is weak and kind of noisy. The cooler mount is almost but not quite AM-5 cooler compatible. I made a mount to adapt the NH-L9a to the slightly smaller…
The Vargo Dig Dig cat hole shovel / trowel is an amazing tool, but has sharp edges. Protect the contents of your bag with this sheath / case! The sheath was designed to print with 95A TPU, which gives the ability to push in / pull out the…
Bracket to mount an LM2596 DC to DC converter to any extrusion with M3 hardware. A good use case is the Voron V0 Formbot kit which comes with this converter. PCB mounting holes are sized to self-tap with M3 machine thread screws (they are…
The Minisforum MS-A1 is an awesome low power motherboard case combo, but the cooler is weak and kind of noisy. The cooler mount is almost but not quite AM-5 cooler compatible. This design adapts the NH-L9a to the slightly smaller mounting…
A remix of the official Voron V0 Raspberry Pi Frame to allow mounting on the right side of the rear instead of the left. This makes the GPIO easier to access and allows for alternative wiring options.
🖥 A mounting bracket to attach the Noctua NH-L9i CPU cooler to an AMD AM5 socket. ℹ Noctua provide free upgrade kits for coolers with older mounting hardware! So go and order one. But if you're in a pinch, you can use this instead. 🔩…
Some older models of the Ecovacs Deebot have a brush roll with a keyed shaft which requires a square adapter to fit into the robot. This is a tiny part and easy to lose. Should fit: Deebot Ozmo 900 / 901 / 930 / 950 / 960 Deebot M87 / M80…
Description The Mijia LYWSD03MMC temperature / humidity sensor is tiny and works great. The battery life is fine, but what if it was even better? This is a modification to the battery tray to accept a CR2450 battery, which increases the…
@loicloic made a lovely terminal cover for the V0 PSU. However it seems to rely on screwing into a threaded panel underneath the PSU - while the standard v0/v0.1 instructions have you mount the PSU directly to acrylic with a nut on the…
Mounts to attach the LDO LCP300-24D5 Power supply to a DIN Rail, in either an aligned (82mm hole spacing) or 90 degree (115mm hole spacing) orientation. Uses 4x 5mm M3 standard Voron heat-set inserts This is a remix of the Voron design…
A sturdy trash can / bin / pen pot / pencil pot. The dimensions are 140mm (5.5") diameter by 200mm (8") height, but it's easy to make this whatever size you want in your slicer using the scale tool. The spiralized ribs make this…
Justin Thursday's beautiful cable management raceways are well designed but only come in shorter sizes. I have added additional sizes for easy printing of longer runs without needing to jump into CAD.
Remix of @Ozpyn's XG125 Rackmount ears to fit the XG115
This is a Voron 2.4 / Trident skirt and bezel that fits the Elecrow / Hoysond 5 Inch 1024×600 IPS touch screen , which - by the way - is a gorgeous screen. Here is a photo of the screen for reference A thicker version to is also provided…
Sturdier remix of @loopj's MB8611 Rack Mount with LED light pipes and an SVG for laser etching the face. Wider gussets to reduce flex LED window removed and replaced with light pipes SVG for etching the face with the logo, LED icons, and…
This is a camera mount for the Waveshare OV5640, adapted from Voxel3D_NL 's HappyCam. Motivation I preferred to put a chamber light strip on the inside edge of the 2020 extrusion, so I wanted the camera to mount beneath the extrusion…
This mod extends the original Voron 0 dragon toolhead cowls 8mm down to accommodate a TriangleLab MZE (Melt Zone Extender). A strut has been added to pinch the cowls together at the bottom to prevent them splaying, as they are only…
This is a mount for 9.5mm wide 5050 SMD LED strips. Push the LED strip in from the end - it is retained without the need for unreliable adhesive. Secure with 2x M3x8mm and t-nuts. 200 and 250mm lengths available
Replacement Cover for TecMojo Standard Series Wall Mount Rack / Network Cabinet. Use this to replace a missing or broken cover, or customize your cover to allow cable passthru without compromising airflow. Print the cover on its back.…
These are all currently available results.
