Counting matching models…
For those with a V3 KE and want to remove the spool from the uprights. Not just for the shaking, but (for me) I wanted to feed the filament from a dry box sitting on my workbench. Both original designs were great. However, I wanted to…
If you're like me, I have tons of HSW models with numerous types of connections. I like the new multiboard (MB), but I do not like how the connections do not match that of the HSW wall except for the “peg” connection. I worked with the MB…
I've always wanted a clean and easy way to stow a picnic tap on a keg. Since most keg handles are variable in size your mileage may vary. Printing it on it's side makes for a very strong model but aesthetics not so much. Printing upright…
10.04.2023 EDIT - Changed parameters to include wall thickness and the inside diameter measurement instead of outside. Included the blank insert STL so people can remix. I utilize one of the best inserts I've tested for the honeycomb…
10/21/2023 Update Added a third option to have the EZ insert which is the best insert I've used so far. Also added the STL file for the blank EZ insert only. I remixed my own version of this bin / box to now have two inserts w/o tabs, two…
I know there are many of these out there, but I wanted to create one specifically for my 2oz bottles. The diameter of the hole is 35mm. Please keep in mind the z seam can cause it to be a tighter fit. A little sandpaper to minimize the…
Remixed the original model to fit on the honeycomb wall (HSW.) Can be used to store whatever, but in my case it was used for Q-Tips as the original maker designed. Please keep in mind this insert HAS NO TABS . Tabs on my system are nearly…
A remix of a remix in which I added some fillets to further strengthen the model and allow for easier placement of the tape. I also added a 3MF file which adds %100 infill on the “lip” on top of the model where the tape goes over to…
Mount the Blink Mini on your SE or KE on the Z rail and fits just behind the controller screen. The view is perfect for almost all prints. I have not printed something very tall. I'm no longer using the top filament spool mount, so I…
Very simple and quick print. Mine slides on and off with ease. I might add an option for snap fit versus push pin fit. Sorry for the misorientation. Change the orientation so the pins sit on the plate horizontally.
Snap the flashlight into place instead of having to slide into a full round ring. This works with all the Bellowhowell and knock off's. This is a remix from an OpenSCAD file, but I could not figure out how to mark it as a remix. I…
I remixed this due to having issues with the 45 degree peg. In OpenSCAD it had an odd merge of two objects to create that peg. I deleted this peg completely and recreated it in Fusion 360. I rounded the peg and it barely touches the plate…
Simple print to mount Tuya smart buttons wherever you want but also be able to easily remove them. They could have more than one use, when you need to change the battery or need to reset it. I use them with Home Assistant. I'll provide a…
Simple plug that mimics a screw for devices that hang with a slot in the back. Not sure how much weight it can hold due to being printed vertically, but it seems pretty strong since it's short. Hung my outdoor wireless thermometer instead…
My son loves having a sheet over the bottom area of the bed to become his fort. Very basic clips but posting in case someone is interested. Can post the Fusion 360 file to easily change the parameters for other purposes if needed.
Mount your Quest 2 controllers on the HSW wall. I remixed this model to utilize the EZ insert. It has become my favorite insert. It is easy to install and easy to remove yet it is still strong. Printed with Overture white PETG which only…
The original description hasn't changed. “designed this case to be able to hold standard, utility razor blades. The bump and indentation combination on the lid and base allow it to snap in place so it doesn't fall apart without prying.”…
Remixed the original model so that I could mount it on a pegboard using rivets. Since there is only one hole and it's a tight fit, you do have to hold bottom of the holder when taking the cutters off. You can do this with the same hand…
Adjust the peg / insert to the top of the model so that it can be printed upside down without supports. Also added a second STL so that it can be printed using Sys Pegboard model. I was going to add a multiboard insert, but the MB design…
Model to mount on the wall to hold the pH and Chlorine liquid bottles and the test kit. Created honeycomb holes in the bottom to allow for drainage and drying out.
Update: Made the lid's Z height higher and added a .25mm lip. It snaps on now as it was a bit loose prior. Created a lid for the original seed starting pot. Helps to keep moisture in during the germination process. Printed with Blue PETG…
This is, obviously, a little silly but honestly it is useful for us. I used a cross section picture of a banana as a canvas in Fusion 360 so it's shaped more like a banana than a perfect circle. All that mattered was to close off the very…
Edited the Fusion file provided by the maker. This part just slides on top of the tablet while resting in the original model. This keeps it from moving while tapping on the tablet in the mount.
These are all currently available results.
