Counting matching models…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission…
The band GHOST logo with letters raised 3.3mm I upscaled it 2000% percent to make it a good size. Dont understand why CURA upload it this way as I modeled it bigger, Pursaslicer uploads it at a normal size. Uploaded .STL instead of OBJ…
Night light lithophane of Papa Emeritus IV (Formerly Cardinal Copia) from the band GHOST. I did 2 walls, 99% infill, sunlu white. You can also input 99 walls
This model was created in Fusion 360. the project file was saved from bambu labs slicer. There is a front and a back to this model. The project has a hole cut out into the back plate to allow the running of leds. BAMBU SLICER allows the…
this print is on a bambu with dimensions of 110x220 so you may have to scale it down a little bit depending on what size your print bed is 2 files available, one is a project file that you can load right into bambu studio. Printed with a…
Toyota Supra Keychain If you the use the raw stl file you will need to add a hole in your slicer with a negative cylinder. I used a 3 mm hole Both stl files for back and text at uploaded and can be combined so you can easily do a…
I have added the BAMBU file for P1S so you simply upload the project and print it. STL is uploaded so you can add your layer changes in another program of your choice. I used Bambu colors, but your DO NOT have to use bambu filaments.…
This File is 200x150mm . If you have a smaller build plate you can change the size, but DO NOT CHANGE THE Z it will throw the colors off. You are not limited to the colors I used, you do not have to use bambu colors. Using the colors I…
The band GHOST logo with letters raised 1.6mm I upscaled it 2000% percent to make it a good size. Dont understand why CURA upload it this way as I modeled it bigger, Pursaslicer uploads it at a normal size. Uploaded .STL instead of OBJ…
Simple R2D2 Snowflake Ornament with a hole to apply a hook. Just a simple fun print for the StarWars fans
Print is 150x84mm, will add bambu project file for those who use bambu and the stl file Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA…
Print this with 100% infill and 1 wall First Layer 0.24mm Layer height .08 mm Not really a super fun colorful print, but I wanted to try one of my favorite cars. Always open to ideas, they dont have even have to pertain to hueforge. A lot…
Boba fett snowflake with 2mm hole for a hook have stl file and bambu 3mf file as well
Simple Darth Vader Snowflake Ornament with a 2mm hole to add a hook and is about 4mm thick and 110mm in diameter
Simple Scout Trooper Snowflake Ornament with 2mm hole for a hook. Fun simple print for the starwars fan in you
Simple C3PO Snowflake Ornament with a 2mm hole to add a hook and is about 4mm thick and 110mm in diameter
Papa Terzo and the nameless Ghouls 2 walls, 99% infill, sunlu white. created in BAMBU studios
Simple Rebel Pilot Snowflake Ornament with hole for a hook to hang. Simple print for the StarWars fans
This File is 150x170mm . If you have a smaller build plate you can change the size, but DO NOT CHANGE THE Z it will throw the colors off. You are not limited to the colors I used, you do not have to use bambu colors. Using the colors I…
This File is 200x200mm . If you have a smaller build plate you can change the size, but DO NOT CHANGE THE Z it will throw the colors off. You are not limited to the colors I used, you do not have to use bambu colors. Using the colors I…
These are all currently available results.
