150 models
Soda can dispenser / fridge dispenser Made to fit 6x 330 ml cans / 58x146 mm Flat top and robust structure to allow stacking of other items on top Groove to make stacking easier No assembly or glue Printing No supports necessary Print…
Customizable storage solution for kitchen cabinet doors. With a modular design, they can be combined to create a storage unit that fits specific needs, and adjust it as changes are needed. Each box is designed to fit securely into the…
Print back side down. No supports needed.
Remix of very nice model by Idlebear. After struggling with getting bolts (long) to fit the original model, I remixed it to make it possible to assemble with only 3x M3x25 bolts. The axles were changed to be a part of the print. The gears…
Beach umbrella sand anchor Needed a sand anchor for my beach umbrella. Picture from the hot sand on a beach in Spain. Fits umbrella poles up to about 24mm (the hole is 25mm but I would expect some expansion in the printing process). How…
Print the main parts sideways and print the bolts with threads facing upwards. The base is 5cm wide. There are two bolt sizes. The same design for circular surfaces using the same clamp and bolt can be found here: Circular sanding block .
To simplify the printing process, it is recommended to print the tray with the backside facing down, aligning all internal channels for easy printing. With comparable size to the original tray that came with our Samsung machine. The…
Fiat Ducato Screenwash Funnel Angled to reach the extendable filler tube in the vehicle Print Print upside down Some brim might be good depending on the printer No supports needed Example print eSUN PLA+ - Light Blue
Can be used with one hand. Insert the plug at an elevated angle, then the notch will grip when lowered and lock the plug in place. Simple to print. Needs a small support structure below the notch (inside the holder).
Filament: Polyalkemi - Marble-like PLA, variable layer height 0.1 - 0.2mm. Related model: Desk container .
Adapter for attaching 32mm accessories. Fits Bosch vacuum cleaner (Readyy'y BBH21633) Made to be printed without supports (pipe side down), but may need a brim to stick sufficiently to the bed.
Brace for the wheel bracket to stiffen the weak angle adjustment mechanism. Uses the outer holes on the playseat bracket. This fits when using Thrustmaster T300 (the outer holes are not used). The angle of the bracket can be changed by…
Laptop cooler / pad for powerful laptops Simple print Easy to lift along with laptop due to side air inlets. Example laptop is a 16" gaming laptop. Large air inlets. No fans. High flow bottom plate. Printing / mouting Print size (without…
Print using TPU. Example printed using Polyalkemi transparent TPU.
Print Example printed in PLA No supports needed. Options if the printer is not tall enough The main rollers can be shortened to half length (or any length). Two rollers, each with two bearings may then be fitted to each of the threaded…
Print the main parts sideways and print the bolts with threads facing upwards. The models are labeled with the diameter of the circular shape of the main part. The base is 5cm wide. There are two bolt sizes. The same design for flat…
TH8A shifter Playseat Challenge mount Robust shifter mount for mounting Thrustmaster TH8A to a Playseat Challenge sim racing chair. Printing Rotate the models as shown below. Use supports. Use at least 5 wall loops. Mounting Use six M6…
Key wall box 20 key wall box with hinge Height 240mm Width 178mm Depth 73mm Printing Print flat sides down (front / back) No supports necessary Mounting Use a 1.75mm filament as hinge. Preferrably PETG or ABS to avoid the PLA brittleness…
This design is specifically optimized for strength, with bolts that help distribute the load away from the plastic at the end holes (compressing towards the bolt instead of pulling from). It has been tested with 120kg weight, but further…
Needed a funnel with the right height and angles for my V6 for an oil change. Made this. Should be printed with a filament that has some resistance to chemicals. The example is printed in PETG. The walls are 1.8mm thick, so the funnel is…
iPhone night stand changer base for Ikea Nordmärke Qi charger Made to fit: iPhone 11, 12, 13, 14, 15 and 16 with or without protective cover Will likely fit many others also The base phone model used during modeling were 154x80x12.5mm.…
Why I made this for the bathroom in our boat, as both storage for two rolls and a central rod to make it easy to pull more paper. Can be just as good in a regular bathroom :-) The model Four versions with optional rod, with or without…
Siphon liquid detergent tray for washer Two tray dimensions Normal Short/wide See Narrow tray for Blender file for easy modification to fit your washing machine. Printing No supports needed. Print backside down as shown below Example…
Flsun logo. Printable dimensions. Perfect for "engraving" as logo into other models.
Thetford Fridge Keep Door Open Lock Fits Thetford N3000 fridges with separate freezer. Spring preloaded when installed for tight fit to keep the doors firmly in open position. No goods should be in the fridge if the camper is driven while…
Torsen Differential Type 2 - with base My second remix to add a proper base and driving gear. The model is complete with the simplifications from my other remix. Additional hardware 3x M3x25 bolts with nuts Printing Print the two halves…
Strong Single and Double Pulley for rope This design is specifically optimized for strength, with bolts that help distribute the load away from the plastic at the end holes (compressing towards the bolt instead of pulling from).…
The inner diameters of the adapters are provided as their names/sizes. The adapters go on the outside of the sander and of the vacuum hoses. All adapters are slightly tapered (+/- 1mm). The following are the adapter inner diameters for…
Can be used with one hand. Insert the plug at an elevated angle, then the notch will grip when lowered and lock the plug in place. Simple to print. Needs a small support structure below the notch (inside the holder). A similar 3D printed…
Nissan Leaf Strut Cap - simpler print Covers the upper strut mount to mitigate collection of water Solves this problem: mynissanleaf.com Printing Print with bottom down Supports needed Mounting Remove perforated cover carefully to access…
Modification of the excellent Flsun V400 enclosure cover plates made to support air flow in or out of the enclosure. Prepared for HEPA/carbon filter upgrade. See:…
Can be used without fan with only the sides (passive flow). I needed a better way to cool the printer in a non-air conditioned room since the passive risers I previously used (available at Passive vents ) were not very effective in…
Simple remix of Petr Skřivánek's 42-44mm very nice Apple Watch stand. Only the hole to get the charging cable through has been widened. Tested with Apple Watch SE 44mm original charging cable. Prints without supports.
This tool is ideal for removing prints or leftover filament from the build plate. It is easy to print and features a simple design that is particularly suitable for achieving a smooth first layer, especially when printing with thin…
Fan covers with and without mesh. Print the fan cover with mesh at slow speed, as the width of the mesh is about 3mm, and a good first layer is essential for getting it to print right.
TP-Link Tapo surveillance camera mount Simple mount for TP-Link Tapo camera. Works great with C200. Two files, one that is rotated 90 degrees. Please ensure you use the right one to get the camera end stop and power cable at the right…
Can be used with any fitting enclosure by making the necessary holes, but is made to fit in this enclosure: https://www.printables.com/model/329918-flsun-v400-enclosure-cover I have adjusted Amazon62's top plates in the following remix to…
Update 2024-12-17 Added multiple angles (4) Added marks for where the cable will go to simplify selection of version The camera blind sector is in the direction of the cable Tapo C200 90 degree mount - stronger Simple mount for TP-Link…
Example is printed in PLA. For 957 version, please see here: Porsche Cayenne screenwash funnel 957 .
Fits this scoper: Pet Litter Scoper Thicker walls that typically will be double when using 3 wall loops. Example printed in generic white PLA. No supports needed.
Needed a sealant cap without o-ring. Seals by having in internal cone that wedges securely into the cut hole in the cartridge. Print with flat top down.
Print in place. no assembly or supports needed. Some brim might be good, depending on the printer.
Remixed the screwdriver holder for my pegboard (4mm holes with 12mm spacing). Made to be printed upside down without supports. May need some skirt to support the small hooks that are built from the table. The hooks are quite thin, but the…
Simple to print vents that can be used when using: https://www.printables.com/model/325471-flsun-v400-upper-plate-risers Easiest to print with mesh down. --------------------------------------- More effective active cooling vents can be…
Funnel with threaded sleeve for jug Made to fit jugs with 40mm (inner) to 44mm (outer) threads 4mm thread pitch Printing Print top down with brim some brim as the cantact area is low. No supports should be necessary. Example funnel…
Print the object in an upright position and use a brim. Supports should not be necessary. The OTP token is secured by the ID card, and additionally you can use the OTP strap to secure it through the slot.
Crutch holder Made to fit 22mm tubes. Printing Print with the flat surface down. Should not need supports. Mounting Use zip ties to lock one of the sides to one crutch. Avoid tightening it too much. It is only meant to ensure that this…
Slightly flattened on one side to allow printing without supports.
Ducato door trim panel clips Fits the large door panels. Print Print sideways with flat side down. This will make it quite strong. Some brim might be good depending on your printer. The FULL version is only for non FDM-printers and is…
A simple merge of the two designs.
Fits 958. Will probably fit more Porsche models
Narrow stand for TP-Link Tapo camera. Approximately 60mm tall. Works great with C200. Perfect for having in the window. Use supports under the two “wings” that attaches to the camera.
Flsun T1 arm widening pliers Extends the spring to extract the ball joint rods. Two versions, short and long. The short will be more maneuverable, and the longer more stable and require less force. Printing Print oriented as shown in the…
Get fantastic cooling with this CPAP / WS7040 fan mount for enclosures based on this design. Some noise reduction by covering the fan properly. No screws necessary. Very simple print (no supports). The printed version uses generic black…
A bit of hot glue on the lower part to make it stick to the pegboard. The hooks are strong enough for a stack of grinding wheels.
Print back side down. No supports should be needed.
Print flat side down. Use the printed washer on the flat side when mounting. A bit of grease on the axle is probably a good thing. Original wheel also shown in the pictures. Example print in PETG. No need for a bearing. It rolls very well.
Can be used with one hand. Insert the plug at an elevated angle, then the notch will grip when lowered and lock the plug in place. Simple to print. Needs a small support structure below the notch (inside the holder). A similar 3D printed…
Sharp edges to be able to clean hard to reach places. Print upright with a brim. Example printed using PLA. Two versions, one with hole and one without.
Fits center-feed rolls that are 190mm wide and 200mm tall. No supports needed. Print all parts with the "flat side" down to ensure a simple print. Add a bit of glue on the surfaces between the paper cutter and the body of the holder.…
iPhone changer base for Ikea Nordmärke Qi charger Made fit iPhone 11, 12, 13, 14, 15, 16 and XR. Will likely fit many others also. The base phone model used during modeling were 154x80x12.5mm. Printing / mouting Print with bottom down. No…
Very robust, quick to use, and simple to print Ryobi power tool holder with thick walls. Side mountable. Tested to fit the R18DP7 Cordless Combi Drill and R18IW3 Cordless Impact wrench. It is likely to fit multiple drills, but it has only…
Plastic Bag Holders Two sizes (resize works to do small adjustments) Large: 120x120x240 Small: 80x80x150 Printing Print flat side down. No supports needed Example print Clas Ohlson generic gray PLA
Made this years ago and have used it since. About time to share it. Gillette razor travel case Made to fit Gillette razors. Likely to fit others (not tested) Razor is secured - throw it into the toliletry bag without fear that it will…
Print sideways, lying down. A robust filament should be used (PETG or ABS for example) to make it durable in water. Just a few grams of filament is necessary. If needed, use a permanent marker or a similar tool to mark the levels.…
Rugged tool box for bits Made to accept various bits and parts from ratchet to screwdriver. Some generic and space for hex bits. Many spaces for ¼" sockets. Additional hardware 6x M4x25mm screws for the rugged box Suitable glue to glue…
Covers for Thetford camper van sink (TPU) Model plug diameter 6.46mm Slightly higher than the original plugs to make the cover rest better. Dimensions were perfect fit for me using TPU (needed a few prototypes to adjust the diameter)…
The shaft clicks in place. Simple to print without supports.
After nearly breaking my USB extension cable connectors several times by stepping on them, I created this simple box to protect the connectors. The design is as simple as it gets, and has a simple snap on lid.
Can be used with one hand. Insert the plug at an elevated angle, then the notch will grip when lowered and lock the plug in place. Simple to print. Needs a small support structure below the notch (inside the holder). A similar 3D printed…
Drill bit holder - 1mm -> 15mm. 0.5mm steps below 7mm. No screws needed.
Sofa Leg - 130mm 130mm tall Fits 8mm Unbrako / Allen/ Socket head bolts Conic inside to add vertical and horizontal strength. Narrow by the bolt to help horizontal strength. Printing Print upside down. Low amount of infill needed (to…
Knife organizer - 9 knives Knives of different length. Approximate blade max length 260mm (lower level) / 135mm (upper level) Longer blades may cause the tip of the blades to protrude the knife block. Two versions Tapered end (for tighter…
Makes room for more beans.
Single and Dual Taco Stand Curved taco stand Printing Print sideways No supports necessary. Consider using brim Example print eSUN PLA+ Gold
Very robust, quick to use, and simple to print Ryobi power tool holder with thick walls. Side mountable. Tested to fit the R18DP7 Cordless Combi Drill and R18IW3 Cordless Impact wrench. It is likely to fit multiple drills, but it has only…
Tapo C200 compact stand Small footprint Collects the cable to make the stand more stable. Camera twist on to fix it to the stand Printing Print with bottom down Supports needed under the tabs. No support needed elsewhere. Example Strut…
IKEA ADILS - Extender 60mm Sufficient to clear Ikea Kallax (under the table) Printing No supports needed. Print all parts with the bottom down to ensure a simple print. Example print Clas Ohlson generic white PLA
Nescafe logo. Perfect for “engraving” into other models.
iPhone changer base for Ikea Nordmärke Qi charger Made fit iPhone 11, 12, 13, 14, 15, 16 and XR. Will likely fit many others also. The base phone model used during modeling were 154x80x12.5mm. Printing / mouting Print with side down. Use…
Shower drain filter 72mm diameter 53mm height Knob for lifting Printing Print with bottom down No supports necessary Some brim may be needed - depends on speed and printer Slow print may be beneficial Example print Clas Ohlson generic…
Can be used with one hand. Insert the plug at an elevated angle, then the notch will grip when lowered and lock the plug in place. Simple to print. Needs a small support structure below the notch (inside the holder). A similar 3D printed…
Rugged Box - mesh simplified for remixing I use Blender for modelling, and really like this simple, yet versatile rugged box for many of my projects. As Blender operates on a mesh for imported STLs, redimensioning and moving features…
Center-feed paper towel dispenser 130x200mm Fits center-feed rolls that are 130mm wide and 200mm tall (or smaller). Separate wall bracket Printing No supports needed. Print all parts with the "flat side" down to ensure a simple print.…
Prints best bottom down. May need supports under hooks (depending on the printer). Examples are printed with PLA. Two sizes.
For 13 x 451mm sander belts. Simple to print with no supports.
Knife organizer - 2 knives Two knives of different length. Approximate blade max length 235mm A longer blade may cause the tip of the blade to protrude the knife block. Printing Check infill and top layer slicer settings to have…
Based on how the support is mounted, it may need some angling. Blender file provided to simplify modification. The STL-file bracket is not angled.
Had some trouble slicing the original design, and instead of modifying it I made this from scratch using the same dimensions. Example is printed in PLA, as I understand PLA withstands alcohol. (screenwash with antifreeze). However it…
Funnel with sleeve for jug Made to fit jugs: more than 30mm inner diameter hole less than 50mm outer diameter hole Printing Print top down with brim some brim as the cantact area is low. No supports should be necessary. Example funnel…
Knife organizer - 9 knives - cut version Knives of different length. Approximate blade max length 260mm (lower level) / 135mm (upper level) Longer blades may cause the tip of the blades to protrude the knife block. Two versions (see…
Rugged Box for Sewing Awl Made to fit sewing awls. Dimensioned for “Ivan Sewing Awl Kit”, but will probably fit others as well. Print the “AwlOutline” test print if you want to measure whether your stitching awl will fit. Additional…
Print sander side down (use brim). Requires supports for the twist coupling part for the vacuum hose.
Camper waste water handle (8mm) Simple to print. Fits 8mm square shafts. Print Print letters down. No supports needed. Example Print Clas Ohlson gray PLA
Brush refresh for Roborock S7 series Uses original brush core and bushing No glue Easy to print 3 hard (core) parts, one TPU part Reusable core parts and lock ring. TPU part can be replaced quickly when worn out and locked in place with…
Winter Cover for Thetford Fridge Vent Multi part snap on. Depending on how much coverage is needed. Typically commercially sold covers are like this: Print this combination for similar coverage as shown above: 10 Lowest x2 9 Lowest x 2 8…
Drill bit holder for pegboard. No screws needed.
Remis / Ducato Pleated Cab Blinds Cover Similar design to the original cover Fits the side window Printing Print upside down May be good to use PETG rather than PLA to be more temperature and deformation resistant Example print Gray…
