Counting matching models…
This is my design for a diy darts ring light. You need to print eight ring elements, four connectors and four holder/feet. The Ring elements Screwed together with some m3 button head screws. I used this LED strip:…
This is my new design for a diy darts ring light. Connected to the dart board by four little magnets in each feet. I glued the magnets in place with some glue (based on cyanacrylat). I used this LED strip:…
Bosch GTS 10XC sliding rail (less clearance)
Hello, this is a simple burger press. you can use the plate for the top and the bottom. Printed with PLA works great, but you need to avoid the dishwasher =).
Easy to print. You can see how it is used in the picture! Have fun!
Three Gears to put on a toddler busyboard. Works great and is easy to built.
Better Version of the bike computer holder. You will just need two M3 srews (10-12mm) an two M3 srew nuts. Fits for handlebars with 31.8mm diameter. Just use the original base and screw it to the holder. Printed it with Sunlu PLA+. You…
Hi, this is my diy carp swinger. I use four of them and they work pretty good. Printed the parts with PETG. Here the overview of the non-printed parts: threaded rod M4, circa 180mm 2x M4 nut 2x M4 washers ball bearing 8x19x6 mm coil…
Bike Stand/Holder for any mountain bike. You can screw it on, i built something with some remnants.
Hello, this machine works with a gear dc motor, i used this one: https://www.amazon.de/gp/product/B0863R5R9F/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Furthermore you will need a battery, a radialfan and switch. For the soapy water…
Habe den Adapter mit PLA und 20% Infill gedruckt.
Printing Instructions: download the file divide the model into objects in your slicer software duplicate the small knob print the parts screw the knobs with two M3x5 screws to the baseplate Additional needed: 2 M3x5 countersunk screw
This is a adapter for the Bosch GTS 10XC and the Scheppach DC 500 sunction system. Printed in PLA
Replacement feet for the Bruder Manitou
Simple kitchen buddy. I used PETG with 100% infill 0,15 mm
A little helpful steering adapter. Gives you better grip.
Spare part, flexible role for Kaercher VC2 vacuum cleaner.
Brackets are easy to print and you can screw them.
Requires a Ugreen Fine Track Tag 1x M5x16 mm screw and 4x M3x8 mm
These are all currently available results.
