Counting matching models…
A small tray to go below the heat bed, to catch purge from the hot end. The tray has some kind of studs below that go into the aluminium extrusion profile cross beam. There is enough distance to the rollers that move the heat bed, and you…
The Batman Model is great, but needs a Superman Companion. So I reused the compatible parts and colored them accordingly. From the remixed Batman I used: Left + Right Leg, colored it blue and some lower part of the legs red (for Superman…
Remixed the tray for the Kobra Neo to extend below the rollers. This allows to cover the whole open section. Notice that it is not designed for the Neo 2! Update: The model that this was remixed from got an update for Neo2 compatible…
The remixed roomy esp32 box is really great, if you want to have a bigger packaging, which allows to use pin heads and those breadboard wires which connect directly to pin head without soldering. In this remix I made this box more…
Motivation I do have a shadow sail, that is mounted with ropes and those got loose over the time. I did not want to re-mount that when a simple rope tensioner would do it. I was pretty sure I saw a similar model once here, but could not…
A simple shelf for Figures that can be built out of those hexagonal parts and fit nicely into one Kallax compartment. It is designed such that 3 parts in a “row” almost fills the kallax space horizontally (325mm vs 335 mm Kallax) and one…
When putting a filament spool inside the vacuum bag, it is often difficult to press the vacuum pump against the valve if the spool is large/or wide. It is easier if there is a higher counterpart, and this model provides this. It was…
A remix of the cute little pumpkin spider with a smoothened stl file and a full colored 3mf file. In the 3mf file I tried to set everything to standard settings (System presets) so that you don't have to import my user presets at all.…
Motivation I have several hooks / coat hangers in my house of the same type – one central upper hook and two smaller lower hooks. On two of them the central one broke the last years, and this week one broke completely by also loosing the…
Update: I updated the compartment and offer two version of that – see below for the differences. If you use a Levoit Core 300/300s Filter (replacement), you can add with this model an additional compartment to fill with activated carbon.…
Original description by “_marcovaldo_”: "This sieve keeps the coffee ground pellets (almost) dry. No (white) mould seen anymore since using it. Also cleaning of coffe grounds container much easier(very little ground coffee powder falls…
A refined Oral B Toothbrush Stand optimised for easy put on / remove single handedly. Several iterations were needed to get this sweet spot of it is easy to remove but not too wobbly. Should print quite easily. Also added a Version were…
A stackable Box with an optional inlay and a separator that allows to divide the box in multiple compartments. I printed all the parts without support, although the rim at the bottom may need a support. All the parts have a good fit, but…
A big enough snack plate that allows you to serve your favorite snacks – fine seperated in its own compartment. Sometimes you want to serve sweet things and not sweet snacks, like chips and peanuts, on the same plate. With this snack…
I liked the roomy esp32 enclosure, but my az-delivery boards did not fit. What I did to remix this was using MeshLab ( https://www.meshlab.net ) and following this tip on stackoverflow (…
A Base Bord that fits four of the referenced Organizers to keep them nice and closely together.
There is this great slinky on here ( https://www.printables.com/de/model/842456-slinky-spring-cylinder ), that prints well and that is very popular with the kids. If you print this, you will need to seperate it afterwards, as it will come…
Motivation We use those MEPAL Lunchboxes and one came with an “inside box” that has two compartments but no lid. I guess the idea is that it sits inside well covered by the main lid, such that it may not spill small parts into the main…
A player organizer holding taxi, bus, and subway cards with an added groove for easier removal of the cards.
The lid of the MUM9 has a big opening, this is a lid cover to avoid something getting in. I tried to match the outline of the opening as good as possible, there are still some tiny deviations, but it is good enough that it has a nice fit…
The gauss cannon is a great thing, but I only have 10x2mm Magnets. So I created an adapter, that fits into the referenced model (use the 3mm variant). If you would like to adjust the adapter to your dimension, feel free to change the…
Update After a discussion with a https://www.printables.com/@PennybridgePioneer (see comments) and some time in between I noticed that I could improve the center piece – read further down what and how. Problem We have some obstacles…
Update: I added 2 variants of the top plate that allows to use a 12 V 4 Pin PWM Fan (+Control Board) Additionally the middle plate was adjusted to work better with some additional activated carbon compartment, that I designed…
With High Flow Nozzles (CHT) and when printing with PLA and due to the improved heating of the micro swiss hotend you have to adjust the print settings / print temperature and take care of retraction settings etc. because it is really…
Just needed to raise the printer a bit and designed those.
Needed a bigger EDC Tray, with Wallet, Key, and KeyCard compartment. Additionally added a small space where you can store some paper or letters in an upright position.
A small clip to replace the broken original one that holds the sun screen up for a passenger window. Easy model, easy print, easy fix. I printed it with PETG and it has proven itself in mid-european summer. If your place / car tends to…
A Wizard Wand / Wizard Staff as wanted by my son. Consisting of three easy to print parts, just put them together and add some glue. For the “crystal” part I printed it in upright position, using a big raft. The same for the wand part, I…
A big but somewhat flat box with removeable inlay that can be used to take your favorite (un)healthy snack with you when going on the road. Should fit nicely in a backpack. The inner size is 220x170x40 mm, the inner tray is available in…
A cutting board designed for 3 round boards of diameter 250 mm and a thickness of ~ 15mm. The model consists of two parts – the base stand and the separator part. This should easily click into the base stand. You need to print one base…
This inlay is a variant for the esp8266 amica board by az-delivery. Please download the enclosure + lid from the referenced model – they are compatible. If you need to adjust this inlay, just use the added FreeCAD file. FreeCAD is open…
The kids got this carton toy money for school, this is a nice transport and sorting box. 100 Euro Size: 55x31mm The depth of the individual are according to the amount of bills and coins we got for school. That are: Bills: 1x100€, 2x50€,…
Whenever I emptied the ground container, I littered some of the stuff beside the organics trash bin, because the opening of the ground container is too big. This model helps here, by partly covering the ground container for the time…
A holder for the Smart Cards/Slides that come with the Microscope. Design need to be glued on (I used doublesided tape on the curved part at the front). I printed it with the angled bottom of the holder flat on the bed and used support.
Update: Added Pipe Parts – you can now print your own pipe if needed. Problem The AMS has some desiccant compartment, and a lot of people use additional desiccant holder inside the AMS. Most of them cannot be accessed when the spools are…
Just changed a few parameters in the openSCAD file, to make it smaller (60mm height, ~ half the diameter, thinner wall)
I used those clips for cable management and they worked very well. So I drew this version that allows to mount a webcam onto it (I used a cheap webcam from a well known online market place, and it had fixed focus, so I needed a little…
Just a substitute for a broken cap for the M.Asam Lipbalm.
The MUM9 slicer needs a lot of space if stored as it is, because it has no support below its connection point to the machine. This “model” is very simple but effective – it just supports the slicer at the right position, and allows you to…
A fully colored file for Bambu Studio.
A Tablet holder that allows to look at the tablet from *below*. To watch movies when the tablet is on a higher level. It is suitable for 10" tablets, the pillars shouldn't cover too much of the display. The angle is about 35° from the…
It is a small box with three compartments – one for the bills and buildings, and two fitting for the two different type of cards. It uses the remaining space in the board game box such the box is organized and you do not loose time…
These are all currently available results.
