Counting matching models…
20-5-'26 Update If you have a Pheatus Conch hot end, there is a new model upload for it of this duct. This will fit without having to force the Conch hot end behind the original duct in this upload. You can find the new Conch version here…
I needed something to make it easier to adjust the knobs underneath the buildplate while doing the paper leveling or when using the Klipper “screw_tilt_adjust” Result is this 12 sided key that fits the leveling knobs perfectly. I kept the…
A simple bowden coupling clip
This part for the Qidi Plus 4 raises the height of your filament spool with 75mm for extra clearance of riser units like my own design or to use larger spools without a vented riser. It is recommended to use more walls and higher…
03-28-'24 Edit added on the bottom! 04-01'-24 Edit added on the bottom! I started with printing the gridfinity box from “ Pred ” and quickly found that I actually would have more need for something with drawers. I wanted to incorporate…
About 5 years ago I made these 28mm scale windows and doors with meshmixer for a foam building project I was working on. File sizes are somewhat large because I didn't know how to make stuff with Fusion yet. All parts were printed on my…
I wanted to utilze the maximum surface area of my Qidi Plus 4, but while setting up a test print I ran into a problem with the exclusion zones pre set in the Qidi studio slicer. With the “filament replacement” command on the printer…
I have been using my Prusa XL almost daily since it arrived early may. One of the first things I made was a nozzle cleaning brushholder, for those cheap brass brushes. Although they worked ok, they were not perfect. After seeing a video…
04-01-'24 Edit added at the bottom! This is an adapted version of my other drawer box set . This adaptation makes it possible to print on a Bambulabs printer. This boxset is 230x230x97mm To make printing easier I have, where neccesary,…
I wanted a different color chainguide for my Specialized Status Moutainbike and quickly found out that specialized uses special hardware to mount the chainguide to the ISCG05 bracket. A few minutes in Fusion360 and I had a model I could…
For a 28mm scale steampunk foam building project I designed this boiler set. Designed in meshmixer so files can be a bit large for the models you get. Printed in resin at 0.05 layerheight
Made with meshmixer 5 years ago for a steampunk project. Suitable for 3, 4, 5, 6 and 7 mm pipes Printed with 0.03 layerheight
This is a slightly altered Ameralabs town test file. I added chamfered edges to the bottom part for easier removal of the print from the build plate. For a detailed explanation on how to interpret the printed test piece, check the…
I really love my Phrozen Sonic Mighty 4k, but the hood that covers the printer/vat area was a big nuisance. Every time a print was ready you needed to remove it and put it somewhere where it didn't stand in the way. Another thing that…
I made a small cover for the right side panel bolt. The bed cable has a tendency to get snagged behind it and this cover prevents that. I made a project file for the QidiPlus4 with height modifiers so the final surface finish is…
In the past few weeks I received 3 separate requests for the matching woofer grille for an older design I made earlier. I had some spare time and decided to finish the woofer grille I had already started designing a long time ago. Since…
For a Steampunk foam building project I made these brackets to hold 3mm to 7mm pipes to the walls of my structure. Made 5 years ago with meshmixer, so file size is somewhat large. Printed with 0.03 layerheight
Variation on this model so it will fit the Phaetus Conch hot end.
Modified ARCO extruder core body with improved filament path Edit 3 - Detailed print settings It is highly recommended to print the ' Filament path parts ' (orange parts in the drawings) with a 0.2 or 0.25 nozzle! For both versions, 0.2…
I recently received my KickStarter “Phrozen ARCO” fdm printer. After going through all the calibrations and firmware updates, I started noticing Z-banding on all of my test prints. Upon inspecting possible causes, I found the top of all 4…
After having build the Phrozen Arco Pentashield I wanted to change the inlet position of the Bowdentube, because having to fiddle behind the Pentashield, to feed the filament into the bowden tube, very quickly became an annoyance. I…
I made a replacement extruder cover with an open top hole for the heat break cooling fan. The intent was to minimise the whistling jet engine sound from the air current produced by the small 25mm fan. This didn't really work as intended,…
I needed some knobs for the resin printer enclosure and the curing chamber. In this time of SARS-CoV-2 pandemic, this seemed like a nice design. They are biohazardous material cabinets after all, so why not.. Print Settings Printer:…
I have come across a lot of posts on different social media where I see a lot of the same problems people are having with resin 3D printing. In this guide you can find the basics to get a good start and a lot of answers to your questions…
The seals for my Wellgo MG-1 flatpedals were worn so I designed new seals. Printed with RESIONE F69 rubber resin 0.03 layer height Seals are 3 years old and used at least once a week for a ride on my Mountainbike and still hold up well!
Update 27-6-2026: I have added new outer mold casings with more space to be able to create a thicker, 2mm walled silicone sock. I thought my own test cast was a bit thin walled, so I added the 2 extra files. Someone jokingly asked me if I…
Last year I broke a towel hook and needed something that would be easy and conviniently near my IKEA ANRATTA hot air oven. I wanted hooks that could clip onto the oven handle but would not drop the tea towel or ovenmittens when the…
These blocks, you need 1 on each side, are needed to align the gantry of the Arco, when the left en right Z-axis are no longer at the same height. Some people seem to have accidentally thrown away their Z-axis alignment blocks. These are…
I bought a few WiFi dimmers that are to be installed behind your wall mounted light switch. The junction box in my concrete wall was to small to house the WiFi dimmer unit, so I designed a bigger cover for my existing switch and wall…
I needed a stronger magnetic clip for my ‘Evoc Hip Pack Pro 3’ hydration hip pack and while I was designing this, I decided to make it a clip on baseplate. Now I can easily add one to any packpack strap with a width of 24mm. It slides…
A friend asked me if I could design an earplugs case for her custom made concert/party ear protection earplugs. She has difficulty recognizing left from right of her custom earplugs in a dark club or venue, so something with separate…
I wanted to get easier access to the hot end of the Arco extruder and the possibility for better heat break cooling. Since there wasn't a lot of space for extra heat break cooling in the front I made a design which moved the part cooling…
Qidi Plus 4 ventilated top riser Update 11-10-'24 : Added 2 files, see below Update 16-10-'24 : Added an explanation for the Foam template file, see below I recently bought the new Qidi Plus 4 printer and experienced a clog caused by…
These are all currently available results.
