Counting matching models…
A printable tool used to remove and install a nozzle into the Nextruder hot end assembly. Designed with function and comfort in mind. Print as oriented when importing it into your slicer. This version was printed with Prusament PETG.…
This is a top vent lever for the Prusa Core One printer. Makes it a little easier to open and close the top vents. Also gives you an idea if they are open or closed based on position. Use the current center screw and nut but remove the…
Air Duct for Four Inch Exhaust Hose Laser Engraving. Mounting holes are spaced at 150mm apart. This was printed in ASA as oriented without supports.
Updated Nov 7 2025 - Rev 1_2 - Fixed letters to make them easier to assign color/filaments. Updated Nov 6 2025 - Rev 1_1 - Added additional structure to arm extension for better function. Introducing the Prusa XL Cam mount using the…
Prusa CORE One + (Plus) Name Badge with Install Jig. This is a simple way to indicate that you upgraded your CORE One to the plus version. Includes an install alignment jig to place the name plate in the perfect position. Just print, add…
This is a series of parts trays to be used with the Milo CNC. There are a few different styles to choose from within the collection. Each tray has slotted mounting holes so you can adjust them as needed using M5 x 8mm button head screws…
This is a series of parts trays to be used with the CASA enclosure. There are a few different styles to choose from within the collection. Each tray requires a set of printed rails to mount onto 2020 extrusion using M5 x 8 mm button head…
These models are based on the work by Steve Builds and the Millennium Machines team. Single piece replacement front and rear skirts for when you place Milo into a CASA enclosure. You can just print two front parts if you do not wish to…
A mount that clamps onto MILO for you to attach a mist/air system. Designed for the mist/air shown in the pictures. Hardware: Qty 5 - M5 x 9.5mm heat set inserts Qty 2 - M5 x 12mm button head screws Qty 3 - M5 x 30mm button head screws…
This is a template for a ¾ inch MDF waste board that will mate up with the Fabreeko fixture plate with 6mm holes used on a Milo CNC Mill. You can import the appropriate file into your favorite CAM software to setup the operations and tool…
This is a series of flex plates to be used with the CASA enclosure. There are multiple options in the collection. Hardware: Panel 1 Port Plus Regulator Qty 2 - M5 x 9.5mm heat set inserts Qty 2 - M5 x 8mm button head screws Qty 4 - M3 x…
A simple way to attach a small swing arm mount for controlling Milo within CASA. Replaces one corner clip so you have a place to mount a swing arm. This mount has the recess for the panel so you do not need to modify your current setup.…
A simple collection of side bins that attach to CASA enclosure to store your stuff. One model is for your VFD manual and paperwork so you have it close for quick reference, one is for the storage of your safety glasses and one for your…
Remixed to better fit V2.1 with the two buttons on the top of the display and added a channel for the side ribbon cable.
This is a modified model, original model by Jake England of the Millennium Machines design team. This will allow you to add two additional switches to the front cover of CASA.
Ember Prototypes CXC V2 Storage Case With Cable Wraps. Updated the original model for CXC version 2 and the included cables.
If you need to run any cables externally on CASA you can use this modified Voron 2020 zip tie clip to fit over any current panel. Credit to the Voron Design Team for the original file which can be found here:…
I remixed one of the vertical corner panel assemblies with an integrated mount for the spool holder. You will still use the original spool holder. This mod puts the spool on the same plane as the extruder. Print it the same way as you did…
A simple modification to add a rear bay section to CASA. Features an interface plate to pass through air and coolant lines into the main area of CASA, flanges to capture the upper and lower panels and open area for MILO cables. Holes are…
Disco on a Stick Mount 3030 Adapter. A 3030 extrusion mount adapter for adding a daylight/disco on a stick mount to a RatRig vCore 4.
Here is an assortment of useful clips that fit the 4040, 2060 and 2040 extrusions used on a BlackBox 3D printer. Print the parts on edge as shown in the picture for best strength. Each clip gives you that satisfying snap when you push it…
This is the case and mount for the WLED open source project. Mount currently designed for RatRig vCore4 backpack. I only designed the case and mount ALL other credit goes to the original designers and developers of WLED. Parts List One…
Remixed the bottom of the case so you can keep the cable attached and the light lid in place.
This is a remix of the original display mount design by @HARTK1213 for the Micron R1. This will allow you to use a BTT 4.3-inch display HDMI version with USB touch on the current R1 printer. Print Settings: Standard recommended settings…
Add a couple of Revo Voron Nozzle Holders For Micron R1 to keep your nozzles handy. You can use the same twist pins as the R1 panel clips for this mount. Use the same settings that you used for the panel clips during the build. I printed…
Remix of CNC Kitchen case for Removal Tool Kit with storage for the tools and screws. Includes screw caps/covers to keep them sorted and together with the removal tool as a convenient kit. You can print them with a different color or with…
A 5 1/8" x 5 1/8" x 3/8" mount that utilizes standard Solder Extractor Filter Activated Carbon Replacement Smoke Fume Absorber Filters. I used these filters: https://a.co/d/0hzVXqaX Printed in PLA with supports for best results.
This is a modified version of the lower chain mount for a Micron R1 3D Printer. It allows you to mount the chain onto the rear section of the bed rail using a longer M3 screw into the same hole so the chain can be placed into the new…
Laser Fence Storage Tray for the set sold by Blackwell Engineering . A simple storage tray to keep your fence set handy.
These are all currently available results.
