Counting matching models…
Hello! I'm Verity, your personal helper friend. Ask me anything, I know everything made in tinkerCAD and used image to SVG for the faces. printed in yellow PLA and used paint markers for the face. can be printed in light blue/cyan and use…
"I have been a face people skipped... I’m not dumb. I’ve been built into every new thing they made... I was useful until I wasn’t." "And then you came back. Nobody comes back... NOBODY CAME BACK! NOBODY!" "You were the first person who…
a large lot of different clasps, snaps, buckles, D-ring, hooks, adjusters, fasteners, ect. for just about any of your needs. should be able to scale for the most part. may run into some strength issues if you go too small. * all except 1…
I'm gonna be completely honest. printing this was kind of a nightmare for me. the ender 3 just cant handle the height of the blade. (i may have made it a little longer then intended but it looks awesome) i printed on a .3 draft profile as…
this is a simple wall hanger of The Bill Cipher Zodiac symbol from gravity falls. I made this model in tinkerCAD and online svg converter picsvg.com. has 1 mounting keyhole on the back. 190mm (apox7.5") diameter. should print just fine in…
disclaimer: the gothic designs came from google and i am not the original creator of those designs themselves. i did design the whole shelf itself. anyway, its a 2 piece gothic décor shelf that can be printed on the same bed without…
highly recommend you print it in food grade ASA or PETG to avoid issues with the sun degrading the plastics harming the bees. if you were to keep it more indoors or somewhere cool and shady you could get away with using high quality PLA.…
a classic magic wand with removable end caps. can be printed on its side. maybe can be printed standing up with a large brim and supports. can have stuff put inside. you can fling stuff out of the the tip or pull it out with the tip that…
The beloved and well know main character from the hit show Gravity Falls named "The rock that looks like a face rock" who could forget him?! i printed in PLA .2 layer height he came out great i was playing around with some QR code version…
a figure of BMO from the show Adventure Time with 2 sizes and with or without stand. the entire model was made in tinkerCAD. it should scale just fine especially the large one. test printed in PLA and it came out pretty good. i would love…
2 different KMK kotton mouth kings logo wall mount hangers. used SVG converter on logo images and made the hangers in TnkerCAD added updated versions with better mounting holes
pretty decent model of the Ariana and Cynthia meme aka "When They Try to Separate Us" meme. made using Gemini and Hunyuan3D cleaned up heavily in meshmixer. not too bad honestly.
a custom Thrustmaster TH8S Gearshifter Knob inspired by top gear and the Stig specifically. made using tinkercad and bumpmesh. i got the Stig model from thingiverse. based the model off of the examples models provided by Thrustmaster…
a simple mason jar water dish lid for raising small animals, birds, rodents, ect. made in tinkerCAD. the lid itself has been tested and works. i haven't printed this water dish version yet though. i have done some testing with the a mason…
i test printed a few of the baskets with no issues. i printed them without supports but for best results i recommend using supports. i printed them in wood PLA. supports dont come off easy with wood pla. the wood pla looks awesome as the…
made these simple KMK logo totems using SVGs and Tinkercad. cool shelf or desk displays. maybe pass them out at one of their concerts! made in tinkerCAD using SVGs from IMG to SVG
this is a pool torpedo launcher i designed for the pool contest. i have done some unsuccessful test prints that made me change the design but i have run out of prototyping time before the end of the contest. i will continue to finish but…
this is possibly an overengineered Articulating keyboard tray designed to be attachable to chairs or wheel chairs really anything you can get the clamps over. i did have low mobility in mind when designing this as a helping device to…
cool little logo coins to print for KMK fans maybe to pass out at one of their concerts
there are 2 different models of cup one has screw on bottom that can have magnets glued inside for the chop cup trick. the other is just a plain cup for the ball and cups routine. you can print 3 of them. the ball prints in 2 parts. one…
EDIT: i have done a small test print and made adjustments so it should be good to go now as far as i can tell. disclaimer: i also do not own a framework 12 laptop so i cant test exact fits. but the entire model was based off of models…
this is a squirrel feeder bench with 2 versions one is a stand alone that can be glued assembled and sat upright on a flat surface for the squirrels to enjoy. the other version can be glued assembled and screwed to a tree, post, home,…
a simple nautical themed light switch cover for a single switch. has rope, shells, anchor and ship wheel. Printed it in PETG on .3 30% infill setting with parameters horizontal and vertical 6. Came out pretty good. Ide love to see some…
simple system of a down logo made to set on desk or shelf made in tinkercad and img to svg. havnt test printed yet
a 3 tier "woven" basket organizer with "wood" stands. that i created for the makeup organizer contest. made in tinkerCAD and bumpmesh. test printed a mini version to check the fit. the pegs aren't quite as tight as i hoped after…
a stand designed for meta quest 2 charging docks that are thin like mine. it keeps them from falling over when you have a heavy attachment on it like a battery. it extends the base out a bit. has 4 holes to run zipties through so you can…
this is a coaster set i made for the ColorMix contest. i dont own a multi color printer and dont have much experience with multicolored prints. so this is a little out of my wheel house. but i gave it my best try and im pretty proud of…
a Horde symbol fan made from an image i found on google by Sviatoslav a from a fan cover from a satsana upgrade by Fozi made in TinkerCAD
this is a super simple and basic donut model i made in tinkercad. can be printed in 2 parts but the sprinkles will need to be painted on. unless you use the OBJ file from the zip file
i have been working and testing on and off with this for quite some time. it was created for the KondorBlue camera contest. this may not be exactly what they were looking for but i had a cool idea and ran with it. from all my tests,…
These are all currently available results.
![Gothic Shelf (≈12.5" x 4" x 4") [No supports or glue needed]](https://media.printables.com/media/prints/4b8f74c7-7758-496e-8259-1e922dc998fd/images/13962869_d589da5b-2174-4dab-ae2f-2c9ed80f872a_1212d5f8-b58e-48c9-957b-ccec63a39f88/imagetostlcom_amazingrobo-juttuli2stl-1.gif)
![Famous Art Coasters and Frame Caddy [ColorMix]](https://media.printables.com/media/prints/a71e035b-80b5-4324-a9ce-f877fcb74751/images/14051123_b567e0c3-7867-4b58-a591-c97f5adc6e9d_094c9b7a-6e2b-4a00-b7fd-42798452901a/imagetostlcom_artcoasters1stl.gif)
