Counting matching models…
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: part 1/2 and cutter: 4 part 3/4: 10 part 5/6: 15 Supports: only part 5/6 overhang Assembly: Fix hinge parts with superglue (e.g. Cyanoacrylate) First add parts 5 and 6 to…
Print approx. €4.71–€5.75 excl. taxPreliminary estimate for PETGSource material: PET
Most minimized and functional USB Cable Organizer ever Printing parameters: 0.2 mm resolution, 3 perimeters, no supports. Common cable diameter is 3.50 mm. Gcode contains one piece of each size.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Shaker Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm Grids: small, medium, large, open closed, small, medium, open closed, medium, large, open Lids: plain “S” for salt “P” for pepper “C” for chili, curry “O” for oregano…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for PETGSource material: PET
Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm O-rings: Printed O-ring with FLEX O-ring 34 x 2 mm Printing Parameters: Resolution: 0.2 mm (O-ring 0.1 mm) Perimeters: 4 Infill: 15 % Supports: no Seam Position: rear Tips and…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
Cable Clips in different sizes: 1 x 3 mm 1 x 4 mm 2 x 4 mm 1 x 6 mm 2 x 6 mm 1 x 8 mm Printing Parameter: Material: PETG Resolution: 0.2 mm Perimeters: 3
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
ATTENTION: Strictly avoid short circuit and wrong polarity !!! Part list: DIY powerbank modul 2.4A (e.g. from ebay) 4 Samsung INR21700-50E (21700, 5000 mAh) 4 hex screws M3 x 6 4 insert nuts M3 x D4 x L5 1 m flexible cable 0,75 - 1 mm² 2…
Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant
Epic 3D printer toolbox for: screw drivers tongs hex keys brush deburrer scraper flashlight lighter IPA spray glue oil lubricant SD/USB cards nozzles other small parts Printing parameters: Resolution: 0.3 mm Infill: 10%
Print approx. €27.38–€33.46 excl. taxPreliminary estimate for PETGSource material: PET
Printing Parameters: Resolution: 0.2 mm Perimeters: 3 Infill: 15%
Print approx. €8.96–€10.95 excl. taxPreliminary estimate for one variant
Horizontal and vertical 20mm backpack mounts for Armytek Wizard and Wizard Max. Material: PETG Resolution: 0.2 Perimeters: 4 Supports: yes
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Outer diameter: 35 mm Inner diameter: 31 mm Print it with supports.
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for one variant
Holder for 1000 ml / 35 oz bottles Diameter: 80 mm 4 attaching options Printing Parameters: Material: PET Resolution: 0.2 mm Perimeters: 4 Infill: 20 % Supports: yes Seam Position: rear
Print approx. €9.53–€11.65 excl. taxPreliminary estimate for PETGSource material: PET
Use 4 Perimeters.
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
No supports needed.
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET
Holder for PET bottles to support local birds with water. Important because of increasing heat waves. You need a PET bottle and a 21 cm plant pot coaster. Feel free to ask for other diameters. Printing parameters: PET 0.2 mm resolution 4…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for PETGSource material: PET
Print it with 3 Perimeters. No supports needed.
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Sizes (Diameter x Height): 30 x 25 mm 30 x 35 mm 30 x 50 mm 42 x 35 mm (2 mm and 3 mm thread) 42 x 50 mm (2 mm and 3 mm thread) 42 x 65 mm (2 mm and 3 mm thread) 66 x 50 mm 66 x 65 mm 66 x 80 mm Printing Parameters: Resolution: 0.2 mm…
Printing Parameters Roller Cutter: Material: PLA Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: Organic, only on the headbed To avoid supports on the threads, add a cylindrical cap (0.2mm) at the bottom during printing and remove…
21 different storage boxes for IKEA Skadis: 1 case, 160 x 40, 160 x 60, 160 x 80 mm, height: 20 mm 2 cases, 80 x 40 mm, heights: 20, 40, 60 and 80 mm 3 cases, 120 x 40 mm, heights: 20, 40, 60 and 80 mm 4 cases, 160 x 40 mm, heights: 20,…
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no For two colors add a color change Calibrated with my favorite pasta Barilla Spaghetti no 5 (also works for all other spaghetti).
Printing Parameters: Material: PLA or PETG (more durable) Resolution: 0.2 mm Perimeters: 3 Infill: 15 % Supports: no One color or add color changes at 12.6 mm and 57.4 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape…
Sizes: Small: 55 mm Medium: 62.5 mm Large: 70 mm Printing Parameters: Resolution: 0.2 mm No supports needed Only cut off the two struts Related Models: Skadis Storage Box Skadis Sanding Block Holder Skadis Basic Hooks Skadis Grinder Holder
Printing Parameters: Material: PLA or PETG Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no One color or add color changes at 12.6 mm, 57.4 mm and 88.0 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape Use…
Printing Parameters Roller Cutter: Material: PLA Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: Organic, only on the headbed To avoid supports on the threads, add a cylindrical cap (0.2mm) at the bottom during printing and remove…
PLA works good. For durable spring tension use PETG.
Additional you need: Single: 1 x 8/10 mm x 25 cm LED Strip (15 LEDs) Double: 2 x 8 mm x 25 cm LED Strip (30 LEDs) 2 Screws 3.5 x 13 mm 4 zip ties Power supply
Updates: V2: Chamfer at the bottom for better printing Related models: Spoon Holder Deluxe
Printing parameters: Resolution: 0.2 mm Supports: no
Open the STEP files to start. All Skadis basic hooks are located at y+. Add your constructions at y-. NEW: Struts version to print without supports .
Printing Parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Seam Position: rear Tips and Tricks: Cut off the thin struts to insert the belt Add a tiny amount of lubricant to threads (e.g. Vaseline or olive oil) Related…
Cookie Cutters: A-Z, 0-9, & and . Height: 8 cm Printing parameters: Resolution: 0.2 mm Supports: no
Related Models: Epic 3D Printer Toolbox
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Supports: no (only for Skadis hooks) Attachment options: Double-sided adhesive tape Screws Ikea Skadis pegboard
Holder for 7 sparklers to share a new year photo with your friends.
Printing parameters: Resolution: 0.2 mm Perimeters: 3 Supports: recommended
Printing Parameters: Material: PETG Resolution: 0.2 mm Perimeters: 4 Supports: yes
Clips: 20 mm belt, 10 mm hose 25 mm belt, 10 mm hose Printing parameters: Resolution: 0.2 mm Material: PLA or PETG Supports: no
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15 % (Bolts 100 %) Supports: no Assembly: Use a light hammer
Akku Size (Diameter x Height): 18 x 65 mm (18650) 18 x 70 mm (18650, IC protected) 21 x 70 mm (21700) 21 x 75 mm (21700, IC protected) Printing Parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Seam Position: rear…
Printing parameters: Resolution: 0.2 mm Perimeters: 3 Infill: 50% Supports: for Tile Gauge Base only Brim: recommended for long parts Parts for gauge length 50 cm: 1 x Tile Gauge Head 1 x Tile Gauge Base 4 x Tile Gauge Knob 1 x Tile Gauge…
Printing Parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no
IKEA Skadis Holder for Sanding Block 93x115, 115x140 Printing Parameters: Resolution: 0.2 mm No supports needed Only cut off the two struts Related Models: Skadis Storage Box Skadis Spray Can Holder Skadis Basic Hooks Skadis Grinder Holder
Ear Swabs Holder Diamaters: 36 mm 50 mm Cotton Pads Holder Heights: 60 mm 100 mm Printing Parameters: Resolution: 0.2 mm Perimeters: 3 Supports: organic/tree Related Models: Skadis Storage Box Skadis Spray Can Holder Skadis Sanding Block…
Printing parameters: Resolution: 0.2 mm Perimeters: 3 Infill: 15%
Printing Parameters: Resolution: 0.2mm Supports: yes
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: 3 Supports: Organic
Printing Parameters: Resolution: 0.2 mm Perimeters: 3 No supports needed Only cut off the four struts Related Models: Skadis Storage Box Skadis Spray Can Holder Skadis Basic Hooks Skadis Grinder Holder
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 10% Supports: no Brim: recommended
Circular pasta and pierogi cutter 10 cm / 4 inch
Printing parameters: Material: PLA Resolution: 0.2 mm Supports: organic Brim: recommended Model generated by Meshy AI.
Printing Parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no
Printing Parameters: Material: TPU Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Surface: fuzzy
Printing parameter: Resolution: 0.2 mm Infill: 15 % Supports: no Color changes: Start with red Change to white at 1.2 mm Change to red at 3.2 mm
Printing parameters: Material: PLA Resolution: 0.2 mm Perimeters: 3 Infill: 50% Brim and organic supports for Chisel Holder.stl only Tips: Roughen the contact surfaces to the chisel with 120 grit sandpaper Related models: Bench Grinder…
Printing Parameters: Material: PETG Resolution: 0.2 mm Perimeters: 3 Infill: 40 % Supports: no Assembly: 1 hex screw M6x40 1 nut M6
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no Suitable sketchbook: https://www.amazon.de/Notizblock-Notizbuch-Skizzenblock-Schreibblock-Zeichenblock/dp/B08T9H6SQ3 Related Models: Score Sheet Stencil
Printing parameters: Material: PLA Resolution: 0.2 mm Perimeters: 3 Infill: 50% Brim and organic supports for Knife Holder.stl only Tips: Use a spacer that is at least 0.2 mm thinner than the blade Roughen the contact surfaces to the…
Print it with 6 perimeters and 50 % infill.
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no Parts: 16 mm aluminum pipes: 320, 309, 292, 277, 261, 253, 240 and 226 mm 1 mm cord Glue for the ball
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no For two colors add a color change Suitable sketchbook: https://www.amazon.de/Notizblock-Notizbuch-Skizzenblock-Schreibblock-Zeichenblock/dp/B08T9H6SQ3 Tip: To…
Printing parameters: Resolution: 0.2 mm Supports: no Assembly: 2 hex screws M3x6 Hole distance 34 mm (ask for other distances)
Build you own archaeologist diorama with brush and trowel.
Printing parameters: Material: PETG Resolution 0.2 mm Infill: 5%, cubic Supports: no
The ESP8266 (ESP-01) based download counter offers a web server to set the count. After plug in power supply, the device displays its IP address to open by a browser. The count input will displayed in two ranges (0 to 99999999 and 100.000…
Printing parameters: Resolution: 0.2 mm Color change: 8.2 mm Supports: yes Assembly: 4 hex screws M3x10 1 nail
Use M8 x 50 lock screws for 40 mm workbenches. Print it with PETG, 4 perimeters, 50% infill and supports.
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no For two colors add a color change Suitable sketchbook: https://www.amazon.de/Notizblock-Notizbuch-Skizzenblock-Schreibblock-Zeichenblock/dp/B08T9H6SQ3 Related…
Printing Parameters: Material: PLA Resolution: 0.2 mm Perimeters: 2 Supports: yes, organic or tree Text: The signs should be printed on paper and glued on: French Signs.pdf in French Signs.zip Or create your own text with PowerPoint:…
Printing parameters: Material: PLA Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Assembly: PET bottle and 6 chopsticks (7, 8 or 9 mm) Aluminum or wooden rod (20 mm) and 9 chopsticks (7, 8 or 9 mm) Feel free to ask for other…
115 phone sizes supported: Height: 8, 9, 10, 11, 12 mm Width: 69, 69.5, 70, 70.5, … , 79.5, 80 mm Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15 % Supports: no Assembly: For each connection print 2 hinges and use 4 hex…
Wine bag locker for safe transport and fridge storage.
WLAN Clock with ESP8266 D1 Mini and ST7789 TFT 240 x 240 Display. Wiring: ST7789 ESP8266 D1 Mini GPIO VCC 3V3 - GND GND - SCL D5 GPIO14 SDA D7 GPIO13 RES D2 GPIO4 DC D1 GPIO5 CS - - BLK 3V3 - Arduino Code: see ESP8266_ST7789_Clock.ino…
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: part 1/2 and cutter: 4 part 3/4: 10 part 5/6: 15 Supports: only part 5/6 overhang Assembly: Fix hinge parts with superglue (e.g. Cyanoacrylate) First add parts 5 and 6 to…
Printing parameters: Resolution: 0.2 mm Supports: no Assembly: Fix letters and stars with super glue Cut off alignment frame
Printing parameters: Material: PLA Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Assembly: Use Superglue
Printing parameters: Material: PLA / PETG Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: 3 Infill: 15 % Supports: yes Assembly: Use a M3x32 bolt and a M3 locknut
Printing parameters: Material: PLA Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no
These are all currently available results.
