Counting matching models…
I remixed this remix to support the MakerHawk 2200mAh LiPo battery (aff link). The original and the remix before this was just slightly too small to hold my battery. Grab the button STL from the original model.
A cap for the reMarkable Marker/Marker Plus. It has a flat side to allow the marker to continue to sit flush and flat against the tablet magnetically. The cap can help prevent your pen nib collar from breaking, which is costly to replace.…
This is a case for the Heltec T114 V2 for you to dangle on a bag, backpack, or set of keys as a neat “charm”. It includes space for a GPS module, as well as a RAK PCB antenna or OEM coil antenna. Materials Required Heltec T114 V2 nEF52840…
I made this holder because I thought 12$ for one was rather exorbitant, so I bought 12$ worth of smells instead and made my own holder. STEP files are included so you can customize for your car if you so wish. A slide-on sun visor clip is…
This model is those who run a larger printer where the included bowden tube may not be long enough (and too large of a diameter), or just would like to directly attach their dryer feed to their extruder. (This prevents filament from…
A simple disposable lens mount for a Nikon camera using NIKKOR 1 lens mount. Also included is a STEP file so the end-user can modify it to accommodate various disposable lens types. These lens and mount were tested with a Nikon J1. I…
This is a magazine release button guard for the Novritsch SSG11. It reduces the chances of you dropping your magazine when holding your rifle, as the button protrudes and is easily pressed on accident. Print right side up with supports. A…
# 5D Tactical Router Jig Pro 1.25in Vacuum Hose Adapter A hose adapter for the 5D Tactical AR-15 Jig to support 1.25in hoses. ## Description Not affiliated or endorsed by 5D Tactical. A hose adapter for vacuum hoses with a greater than…
This is a case for the Heltec T114 V2 for you to wear as a watch. It works great with the upcoming 2.7 firmware that gives you a watchface. Materials Required Heltec T114 V2 nEF52840 ( Amazon - affiliate link ) 1x 502030 LiPo Battery 3.7v…
The mini crates will store nine discs laying flat, or ten if you don't stack anything on top. The big crates will store thirteen discs laying flat, or fourteen if you don't stack anything on top. All crates will hold 14 discs vertically.…
This is a extra -extended handguard extension for the Novritsch SSG11. It reuses your existing mounting hardware, and wraps around the barrel for a secure fit. Print with the screw holes facing up. Mirror for the opposite side. Print as a…
The shells for these foam dart blasters are easily lost (and difficult to find replacements for), so I decided to model them up. Print with 6 walls and 100% infill for durability. They cycle and hold darts just like the originals! You can…
# Irwin 4.0in Vise Soft Jaws Printable soft jaws for an Irwin 4.0in vise. ## Description Not affiliated or endorsed by Irwin. A set of soft jaws to be printed for working with delicate or prone-to-marring parts. ## Print Instructions…
A replacement knob that goes in the back of a Chevy Volt cargo area
This is a printable mount for the Thurstmaster T300RS that will let you mount an Elgato Stream Deck. It's a great way to add buttons quickly to your sim racing setup without spending a fortune. It should be compatible with both the Mk1…
(See original source model for printing instructions.)
My M1887 dart blaster didn't come with a bird's head grip, but rather with a not-so-convincing stock. I drew up a printable version. It doesn't fit the curvature exactly, but is still comfortable to hold none-the-less and gives a nicer…
This dock is a remix/redraw of Grummie's original reMarkable 2 dock linked below. It is compatible with the Type Folio. I want to thank and acknowledge them for publishing the STLs. (You can see what I did to their models in the…
Print with the top angle of the pen flush against the bed, use maximum supports.
A simple MiniDisc display stand. It fits MiniDiscs with or without their cases. Most cases should fit. Be sure the model is flush to the bed before printing! You can print vertically or horizontally.
A simple lens cap for a Nikon camera using NIKKOR 1 lens mount. Also included is a STEP file of the cap so that the mount geometry can be used for other applications too. Printed with 100% gyroid infill and four walls, flat side down…
This is a base STEP model for a single DIN mount. Perfect for adding your own buttons or whatnot.
Remixed from DocDrill: https://www.thingiverse.com/thing:4241723/files The original did not have a solid file, so I made it from the mesh. (Included also in this post.) Made for use with USB-C Keystone Cable from Poyiccot…
This is a replacement cover for the Apricorn Aegis Secure Key 3NX ( Amazon ) or 3Z ( Amazon ) hardware encrypted thumb drive models. I had repeatedly lost my original soft rubber cover countless times before it fell off for good. To…
A printable replacement window grommet for a Mazda Miata MX-5 / Eunos Roadster (NA & NB), meant to stand in for UB39-58-502A. Printing Instructions Print in a weather and temperature resistant material If printing on an FDM printer,…
Print on its side. Use recommended supports for your printer. I recommend four walls for extra rigidity. Spring Loaded M8 T-Nuts ( Amazon Affiliate link ) M8 Button Head Screws ( Amazon Affiliate link )
Self-explanatory. Print with strength settings for your printer, on the angled side.
Compatible with the Holmes 4" Mini High-Velocity Personal Desk fan . A simple remix of Noctua's airflow amplifier, adapted to fit the mini-fan linked. Best case to chamfer the mounting holes with a Phillips-head screwdriver before trying…
Please follow volzotan's (Christopher Getschmann's) original model page (linked below) for assembly instructions. I have been able to salvage unwanted “ UP-TECH Reusable Photo Camera 35mm ” from Five Below for my lenses.
This is a grip panel compatible with the Novritsch SSG11! It lets you add MLOK compatible accessories to your airsoft rifle. Print with the screw holes facing up. Mirror for the opposite side. Print as a set. Ironing is optional if you…
A printable replacement window grommet for a Mazda Miata MX-5 / Eunos Roadster (NA & NB), meant to stand in for B235-58-502. Printing Instructions Print in a weather and temperature resistant material If printing on an FDM printer, orient…
This was made at the request of a friend. Included are his pictures. This was made for the Steam Frame, but for those with face tracking, who are also using the Arcturus Vision, AND a Vive Tracker. Required Parts D-Shaft 1/4" Tripod…
This is a simple, snap-together case, requested by wehooper4 and vidplace7, the designers of the MeshToad USB LoRA board (version 1.x). Two versions of the top for the case are provided: a debossed version, or a multi-material version. I…
Recommended to print in ABS or PP.
Introduction I love my MiniDisc player, but unfortunately, I am spoiled by wireless headsets! I decided to remix a cradle for my Sony MZ-NF610 and turn it into a case that holds some commercial-off-the-shelf parts to add Bluetooth…
A replacement blank switch for the Nissan Y33 steering column switches. Also includes a single-keystone adapter switch as well. Printing Instructions Orientation : Lay the broad side of the model flat on the build plate. You do not want…
Use with Chinese ink paste: https://amzn.to/3oxd2dB
A friend of mine asked for me to make him a replacement wing end-cap when his car did not come with one. I had initially asked the original vendor for pricing on a replacement end cap… and discovered that it was 60$ a piece, which we both…
On my Toyota Sera, my clutch pedal's cushion has long dried and crumbled away. I took some measurements and printed a TPU replacement to place on my pedal. It shares a part number with a wide variety of Toyota vehicles . Print in TPU with…
I found that the hooks on the handles in the rear seat above the door are difficult to get to for hanging things, especially for larger and bulky items like clothing or suits. If you manage to hang something, it ends up blocking the view…
I'm the kind of person who will lose accessories and tools if they are not directly attached to a device or stored immediately adjacent to it, so I made this tool holder for the “ 3DZWMAN Vertical Heat Pressing Machine,Heat Set Insert…
This is a custom-made bracket for attaching fog lamps to a Toyota Sera that did not come with a factory fog lamp. Bill-of-Materials x2 M8 x 1.0 self-locking nut - Amazon (affiliate link) x2 M8 x 1.0 D 10mm bolt - Amazon (affiliate link)…
Print using TPU. These fit around a 81731-17050 and 81731-17051 lamp housings. It may fit other Toyota cars too of the same era that use these winkers.
This model was a custom request by a friend. He was looking to fit his Haltech HT-011502 CANBUS Keypad into his 1993 Subaru WRX STI from Japan. You may install this flush or recessed. It works great in either configuration! Printing…
A lens protector and kill-flash for your airsoft sniper optic. It was tested with a point blank (less than an inch) Hi-Capa pistol, and all four shots bounced away, however, obviously I cannot guarantee that this model will protect your…
A model of the center console cup holder tray that can found in the Nissan Y33 platform. This may be compatible with other Nissan cars with a similar center console organizer layout too. Print with the flat on the bed. Use 4 walls, 100%…
This is a replacement clear lens housing for the Toyota CleanAce Air Purifier commonly found on 1990s JDM Toyota's. Print with the top facing upwards, using clear filament (or tinted if you so choose) in either PETG, ABS, or ASA. Note…
A model of the center console divider tab that can found in the Nissan Y33 platform. This may be compatible with other Nissan cars with a similar center console organizer layout too. Print with the flat (non-angled) side down on the bed.…
A crude battery door replacement. May need some more tweaking to be exact, but for my use case, it holds well enough.
A model of a cover for the center console cup holder tray that can found in the Nissan Y33 platform Print with TPU with the top facing up.
This has been an idea I had been conceptualizing for a long time- having a blended or more-discreet radar installation that looks OEM-ish. I finally found a car that I wanted to put this on, so here is the model. In the original model…
I made this model for replacing my car's broken cigarette socket cover, while also modifying a cigarette lighter splitter (https://amzn.to/3N2cWEw) to fit in that same spot. This replaces Part# (85535-76020). There is no spot for a…
I made this bracket as my Sera did not come with a Clean Ace air purifier, and a bracket was impossible to find. Uses McMasterCarr - M3.5 x 6mm Self-Tapping Screws90380A361 attaching the air purifier to the mount. Only tested with…
This is a fuse box cover I drew up to finish a dash cam installation job I did for a 2026 Lexus TX 350. You will need to print this in ABS. You need tree supports on the build plate only, along with impeccable bridging performance on your…
I was a victim of return fraud, so rather than perpetuate it or send my mirror to a landfill, I made some parts to restore functionality of the Broadway Mirror (aff link) I got. The bottom grips press into place on the mirror, and the top…
This is NOT for the consumer Stream Deck. It is for the Stream Deck XL module made for DIY and commercial integration into a custom project. (You can find these at Micro Center or from Elgato directly.) For use with: RAM MOUNTS Diamond…
This is a replacement blank to swap out the security module in a JZS171 dash finisher with either a blank one, or another of your choosing. In the STEP file, there is a body (not to be printed) that shows the space that you have clearance…
A lamp cover to replace the one that is above the footwell on the underside dashboard cover. This may fit other places. Print vertically standing up on the flat end. Use tree supports. Use transparent or translucent PETG. You may buy it…
A flush adapter that converts a syringe with a Luer lock to a loose 6mm x 1mm threading found on this particular Hongdian fountain pen nib. Strongly recommended to print in TPU, however, PLA may do as well. Parts Syringe 10pcs 5ml - (…
Use the split-into-parts feature in Bambu Studio to print in multicolor.
This has been an idea I had been conceptualizing for a long time- having a blended or more-discreet radar installation that looks OEM-ish. I finally found a car that I wanted to put this on, so here is the model. In the original model…
A shortened stock tube extension for use with an existing G&G stock tube extension.
A remix for those looking to use a Packtalk Neo as a bridge to wear on their belt or accessory
A custom mounting solution for those using Zenni prescription lenses on their Meta Quest 3, but want to use EyetrackVR's v5 LEDs. I haven't seen one made, so I suppose that I had to do it. You will need the cooling face pad interface…
For some AWFUL reason, Compustar/Firstech decided to have the key ring attachment be secured to the remote via a tiny piece of plastic that can snap off from a four-foot drop onto wood flooring. On top of that, after contacting them for a…
This is an untested model.
Print two of these, with one mirrored. Parts Nuts: https://amzn.to/4tWGDss (affiliate link) Bolts: https://amzn.to/3PIInru (affiliate link)
Print this in ABS, and on its side. I used the MOKIN USB C Hub: https://amzn.to/3W9kOe8 (affiliate link) These cables help too. Get two packs of them: https://amzn.to/4s6kd8W (affiliate link)
Print with the USB-C port facing up away from the bed. Use supports.
For use with: RAM MOUNTS Diamond Ball Base with 2-Hole AMPS Pattern, B Size 1" Ball Mount for RAM Device Holders and Mounting Systems RAM-B-238U (Amazon affiliate link) which secures with 272PCS M5 Screws, Nuts and Washers Assortment kit,…
Introduction I had always been a fan of the Mateba 2006M. It is one object in the world I'd sell a kidney to own. When the opportunity to own an airsoft model came up, I jumped at the opportunity. I saw フリーダムアート's ( GunFreedomArt )'s…
These are all currently available results.
