Counting matching models…
PRINTABILITY - PLEASE READ These are resin miniatures at 32 mm. On FDM with a 0.4 mm nozzle the finest details on this model measure 0.12 mm — below what the nozzle can physically lay down, so they print thinned or missing entirely. For…
PRINTABILITY - PLEASE READ These are resin miniatures at 32 mm. On FDM with a 0.4 mm nozzle the finest details on this model measure 0.23 mm — below what the nozzle can physically lay down, so they print thinned or missing entirely. For…
Celestial clay cutters — moons, stars and cosmic shapes for polymer clay jewellery. Five designs in 15, 20, 25, 30 and 40mm so you can mix scales in one pair of earrings. Printing: no supports required. Millimetres, do not scale. 0.2mm…
PRINTABILITY - PLEASE READ These are resin miniatures at 32 mm. On FDM with a 0.4 mm nozzle the finest details on this model measure 0.34 mm — below what the nozzle can physically lay down, so they print thinned or missing entirely. For…
A botanical clay cutter set for polymer clay and ceramics — leaf and petal forms designed to layer into natural arrangements. Five shapes across 15, 20, 25, 30 and 40mm, so a single design scales into a matched set. Printing: no supports…
The workhorse set: classic geometric clay cutter shapes in five sizes each, covering the forms used most in polymer clay jewellery. Printing: no supports required. Millimetres, do not scale. 0.2mm layers give a clean cutting edge. More…
The Boho Clay Cutter Set is a 3D-printable STL collection for crafting bohemian clay shapes. Five shapes — arch, diamond, gem, moon and teardrop — each in 15, 20, 25, 30 and 40mm, so you can build graduated sets for earrings and pendants.…
Geometric clay cutters — hexagons, arches and angular forms that stack into modern, architectural jewellery. Five shapes across 15, 20, 25, 30 and 40mm. Printing: no supports required. Millimetres, do not scale. 0.2mm layers. More free…
Six 1u trays — 1x1, 1x2, 1x3, 2x2, 3x1 and 3x2. Deep bins swallow small flat things. These do not: SD cards, washers, guitar picks, earrings, spare screws. Printing: no supports, 0.2mm — and they are quick, because there is barely any of…
PRINTABILITY - PLEASE READ These are resin miniatures at 32 mm. On FDM with a 0.4 mm nozzle the finest details on this model measure 0.55 mm — below what the nozzle can physically lay down, so they print thinned or missing entirely. For…
A set of five printable desk name plates with a clean, modern face that reads well from across a room. Includes Emma, Oliver, Sophia, a STUDIO plate, and a GAME OVER plate for a desk that needs less formality. Good as a small gift, a…
A complete starting kit for Gridfinity, the modular 42mm storage system. Includes four baseplates (2x2, 3x3, 4x4, 5x5) and six bins covering the sizes you reach for first: 1x1x3, 1x2x3, 2x2x3 with four dividers, 2x1x6 with two dividers,…
The whole alphabet plus 0-9, 36 cutters at 40mm — enough to spell any name, date or word in clay, fondant or biscuit dough. Letters are set in a heavy geometric face so the counters (the holes in A, B, D, O, P, Q, R) stay wide enough to…
Pumpkin, ghost, bat, cat and tombstone, each in 15, 20, 25, 30 and 40mm. The ghost keeps a scalloped hem and the bat is a single connected silhouette, so both cut cleanly instead of leaving thin bridges that tear. Printing: no supports.…
Paw print, fish, butterfly, bone and bird, each in 15, 20, 25, 30 and 40mm. The paw and butterfly are built as single connected outlines rather than floating pieces, so they cut in one press. Printing: no supports. Millimetres, do not…
Six full-depth 6u bins — 1x1, 1x2, 2x1, 2x3, 3x2 and 3x3 — for the things that need to stand up: pens, drivers, files, spray cans, tall bottles. Each keeps the scooped front and label tab, so you can get a part out one-handed. Printing:…
A cutter set that does double duty for baking and polymer clay work. Printing: no supports required. Millimetres, do not scale. If you are cutting food with these, print in PLA or PETG and hand-wash only — 3D printed parts are not…
Psoas Hook A hooked handle that reaches into the anterior hip while seated, so the tool does the reaching instead of your wrist. TARGET AREA: psoas, self-applied seated SPECS - Size: 30 x 72 x 154 mm - Material: 73.6 cm3 - Solid-core…
Five Christmas shapes — tree, bauble, candy cane, snowflake and star — each in 15, 20, 25, 30 and 40mm, so you can build a graduated set for earrings, ornaments or iced biscuits. The snowflake arms are deliberately chunky: a finer flake…
Egg, tulip, bunny, chick and carrot, each in 15, 20, 25, 30 and 40mm. Printing: no supports. Millimetres, do not scale. 0.2mm layers give a clean edge that releases from soft clay. Every file passed a watertight/manifold check before…
One 1x1 bin at each of the six depths people actually use - 1u, 2u, 3u, 4u, 6u and 9u. If you are new to Gridfinity, print this first. An hour of printing tells you which depths suit your drawer better than any amount of reading, and each…
Toe Spreader Holds the toes apart to restore the splay that shoes remove. TARGET AREA: toe splay SPECS - Size: 84 x 30 x 15 mm - Material: 16.9 cm3 - Solid-core print: it does not compress, so the pressure you set is the pressure you get.…
The sizes the usual Gridfinity starter sets leave out. Most starter sets are deep square bins on square baseplates. Drawers are the opposite: shallow and oblong. This kit is 14 bins and 4 baseplates built for that. Half-height bins (2u,…
Five saddle clips sized for 4, 6, 8, 10 and 12mm cable, each with a flat foot and two screw holes. Saddle rather than a snap-on ring, because a saddle survives being screwed to a skirting board and does not fatigue open after a dozen…
Four J-hooks — small, medium, large and XL — with two screw holes and a triangular gusset where the arm meets the backplate, which is where a printed hook actually breaks. Printing: no supports. Print on the flat side face so the layers…
Four skeletonised baseplates - 3x3, 4x4, 5x5 and 6x4 - that keep the full Gridfinity grid while removing the material underneath it. If you are plating out a whole drawer, this is the difference between an afternoon and an evening, and a…
Six bins at 9u (66.5mm) and 12u (87.5mm) - 1x1, 1x2 and 2x2 at each height. Standard 3u and 6u bins lay tall things down. These stand them up: spray cans, adhesive bottles, long drivers, rolled drawings. Printing: no supports, 0.2mm.…
Back Hook A hooked tool that reaches the mid-back points you cannot get a hand to, so you are not wrestling your own shoulder to apply pressure. TARGET AREA: mid-back, hard to reach SPECS - Size: 143 x 141 x 29 mm - Material: 377.5 cm3 -…
Heart, double heart, arrow, envelope and lips, each in 15, 20, 25, 30 and 40mm. Printing: no supports. Millimetres, do not scale. 0.2mm layers. Every file passed a watertight/manifold check before publishing. More free files and…
Twelve garden markers with the name standing proud of the plate and a pointed stake that pushes straight into soil or compost: Basil, Mint, Thyme, Parsley, Rosemary, Sage, Oregano, Chives, Dill, Coriander, Tomato and Chilli. Raised…
Five bins built for spiral vase mode - 1x1x3, 1x2x3, 2x2x3, 2x2x6 and 3x1x6. Single-wall printing makes these dramatically faster and lighter than a standard bin, which matters when you need forty of them. They are not as tough, so keep…
Back Roller A knobbed roller for the whole back, with the central relief channel keeping load off the spinous processes while the knobs track the erector columns. TARGET AREA: full back SPECS - Size: 98 x 98 x 130 mm - Material: 697.9 cm3…
Psoas Paddle A long paddle handle with a broad head: reach of the probe, contact area of the palm block. TARGET AREA: psoas, broad handheld SPECS - Size: 31 x 31 x 142 mm - Material: 71.0 cm3 - Solid-core print: it does not compress, so…
TFL Handheld A handheld probe for TFL, which is small, superficial and awkward to reach with bodyweight on the floor. TARGET AREA: TFL, lateral hip SPECS - Size: 27 x 27 x 114 mm - Material: 45.6 cm3 - Solid-core print: it does not…
Six printable name keychains with solid, readable lettering and a reinforced ring hole that will not snap off the first time it is pulled from a pocket. Includes Benjamin, Emma, Oliver, Sophia, MOM, and a GnG tag. They print in minutes,…
Free sample pack — 3 printable parts: Heavy J Hook, Double Prong Heavy, Garden Tool Hook Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed…
Free sample pack — 3 printable parts: Battery Aa Tray, Clamp Rail, Flashlight Ring Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight…
Acupressure Heel Pad A textured pad for the heel, for standing pressure work through the day. TARGET AREA: heel pressure points SPECS - Size: 94 x 151 x 14 mm - Material: 40.3 cm3 - Solid-core print: it does not compress, so the pressure…
Narrow Peanut A narrow-gauge peanut for the smaller paraspinals and the cervical spine, where a full-size peanut bridges straight across. TARGET AREA: cervical / small paraspinals SPECS - Size: 82 x 40 x 40 mm - Material: 68.5 cm3 -…
Psoas Probe A narrow probe for a specific point once you have found it with something broader. Small contact area means high pressure at low force, so ease into it. TARGET AREA: psoas, targeted SPECS - Size: 30 x 37 x 144 mm - Material:…
Ten labels that thread onto a cable and tell you what is on the other end: PHONE, LAPTOP, MONITOR, ROUTER, PRINTER, TV, LAMP, CHARGER, AUDIO and CONSOLE. The hole is 6.2mm so it slips over a standard USB or figure-8 plug and then sits on…
Six tags with raised lettering and a reinforced strap hole that will not tear off a carousel: Emma, Oliver, Sophia, Benjamin, TRAVEL and GYM. Printing: no supports, 0.2mm layers, three walls for strength. A colour change on the text layer…
Three hooks that hang over the edge of a desk — sized for 18, 25 and 32mm tops — with an upturned lip so a strap or handle cannot slide off. No screws, no adhesive, nothing that marks a rented desk. Measure your desktop first; the fit is…
Four extra-wide thin baseplates - 7x5, 8x5, 9x4 and 10x3 - for the long shallow drawers that square plates waste. Check your bed: 10x3 is 420 x 126mm, so it needs a 420mm bed or a diagonal. Thin style, so no screws or magnets to buy.…
Achilles Fork A tendon is not a muscle and there is no pressure dose for it. So this is a fork: two rails straddle the Achilles and load the muscle-tendon junction either side, with a clear channel down the middle. TARGET AREA:…
Erector Roller Our flagship. A 36 mm central relief channel keeps pressure off the spinous processes while rows of knobs track the erector columns on both sides. A round foam roller spreads bodyweight across everything including your…
Neck Peanut Sized from anatomy rather than a lacrosse-ball guess: the lobes sit either side of the cervical spine and the channel clears the spinous processes, so you can work the suboccipitals lying down. TARGET AREA: suboccipitals,…
Sacral Cradle Supports the sacrum without pressing on it, so the surrounding tissue can be worked while the bone stays unloaded. TARGET AREA: sacrum, SI joint SPECS - Size: 132 x 112 x 53 mm - Material: 538.2 cm3 - Solid-core print: it…
Hamstring Peanut A free-standing peanut sized for seated hamstring work, so you can load one side at a time from a chair. TARGET AREA: hamstring group SPECS - Size: 148 x 68 x 68 mm - Material: 349.6 cm3 - Solid-core print: it does not…
Reflex Insole RIGHT A textured insole that stimulates the plantar surface through the day. Right foot. TARGET AREA: plantar reflex points SPECS - Size: 200 x 226 x 14 mm - Material: 76.0 cm3 - Solid-core print: it does not compress, so…
Couch Glute Pad A broad supported pad for glute work lying down. Large enough that bodyweight spreads across the whole muscle belly instead of driving a single point into it, which is what makes a ball unusable on the glutes for most…
Couch Neck and Trap Arch A full arch that carries the head while the upper traps drape over the crest. The neck is supported rather than working, which is the difference between a release and a held position. TARGET AREA: cervical spine,…
Knuckle Bar A bar of knuckle-sized contacts, so a long muscle can be worked in steps along its length. TARGET AREA: general, knuckle profile SPECS - Size: 204 x 40 x 43 mm - Material: 143.0 cm3 - Solid-core print: it does not compress, so…
QL Claw QL lives in the gap between the last rib and the iliac crest. The claw profile fits that gap and loads the muscle without pressing the floating rib. TARGET AREA: quadratus lumborum SPECS - Size: 116 x 76 x 45 mm - Material: 162.1…
Seated Cane A cane you use from a chair to reach your own back, so a desk-bound day has an answer that does not require getting on the floor. TARGET AREA: back, seated reach SPECS - Size: 120 x 44 x 131 mm - Material: 121.0 cm3 -…
Big Toe Ramp A ramp for great-toe extension. Push-off needs that range, and losing it changes how the whole foot loads. TARGET AREA: great toe extension SPECS - Size: 34 x 58 x 24 mm - Material: 23.6 cm3 - Solid-core print: it does not…
Body Stick A straight handheld stick for pressure you apply with your arms rather than your bodyweight, so the depth is always under your control. TARGET AREA: general, handheld SPECS - Size: 160 x 34 x 34 mm - Material: 98.4 cm3 -…
Multifidus Thumb Multifidus is small, deep and close to the spine. A thumb-sized contact reaches it without loading the spinous process next to it. TARGET AREA: multifidus SPECS - Size: 84 x 22 x 49 mm - Material: 37.0 cm3 - Solid-core…
Wrist Roller A narrow roller for the wrist flexors close to the joint, where a full-size roller will not fit. TARGET AREA: wrist flexors SPECS - Size: 78 x 34 x 34 mm - Material: 65.3 cm3 - Solid-core print: it does not compress, so the…
Six bookmarks at 1.4mm thick, thin enough to close a book on: Emma, Oliver, Sophia, Benjamin, READ and BOOKWORM. Printing: no supports, 0.2mm layers, prints flat and fast. Two or three walls is plenty. A colour change on the lettering…
Free sample pack — 3 printable parts: Marker Block, Notions Bin, Ribbon Ring Large Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight…
Free sample pack — 3 printable parts: Glove Clip, Hose Nozzle Dock, Pruner Holster Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight…
Neck and Trap Arch An arch that supports the head while the upper traps release over the crest, so the neck is held rather than working. TARGET AREA: neck, upper traps SPECS - Size: 195 x 181 x 80 mm - Material: 1107.0 cm3 - Solid-core…
Gua Sha Scraper A printed scraping tool with a hand-width contact edge. Flat, fast to print, and it does not compress the way a soft tool does. TARGET AREA: IT band, calf, forearm SPECS - Size: 107 x 59 x 5 mm - Material: 23.1 cm3 -…
Neck Cradle Holds the cervical curve while you lie on it, so the neck is supported rather than working. TARGET AREA: cervical curve SPECS - Size: 110 x 158 x 66 mm - Material: 733.8 cm3 - Solid-core print: it does not compress, so the…
Occipital Wedge Supports the base of the skull so the suboccipitals can release without you holding your head up. TARGET AREA: occiput, suboccipitals SPECS - Size: 112 x 130 x 62 mm - Material: 480.9 cm3 - Solid-core print: it does not…
Couch Erector Ridge Twin ridges run either side of the spine so the erector columns load along their length while the spinous processes stay in the central channel, untouched. TARGET AREA: erector spinae, full length SPECS - Size: 180 x…
Couch Lumbar Wedge Supports the lumbar curve while you lie back over it, so the low back extends over a shape instead of being held there by muscle. TARGET AREA: lumbar spine, QL SPECS - Size: 158 x 150 x 100 mm - Material: 929.1 cm3 -…
Glute Ball A large solid ball for the glutes, big enough to spread across the muscle rather than drilling one point. TARGET AREA: glutes, deep SPECS - Size: 80 x 80 x 84 mm - Material: 324.8 cm3 - Solid-core print: it does not compress,…
Thoracic Block A block to extend the mid-back over, with the central channel clearing the spinous processes so the load lands on the paraspinals. TARGET AREA: thoracic spine SPECS - Size: 116 x 84 x 60 mm - Material: 336.7 cm3 -…
AIIS Knob Block Rectus femoris originates at the AIIS on the front of the pelvis. This knob is sized to reach that origin without pressing into the hip joint capsule. TARGET AREA: rectus femoris origin SPECS - Size: 100 x 80 x 50 mm -…
Arch Dome A dome the arch sits over, for a sustained hold rather than rolling. TARGET AREA: plantar arch SPECS - Size: 80 x 80 x 38 mm - Material: 117.2 cm3 - Solid-core print: it does not compress, so the pressure you set is the pressure…
Rotator Cuff Ball Infraspinatus sits in a shallow fossa on the scapula, so a large ball bridges the ridges and never reaches it. This one is sized to drop into the fossa. TARGET AREA: posterior cuff, infraspinatus SPECS - Size: 96 x 84 x…
Glute Med Wedge Glute med sits on the outer surface of the ilium. An angled face follows that plane; a dome just presses the crest. TARGET AREA: gluteus medius SPECS - Size: 96 x 80 x 59 mm - Material: 149.6 cm3 - Solid-core print: it…
Levator Scapulae Wedge Levator attaches at the superior angle of the scapula. This wedge presents an edge at that corner rather than a dome that skates off it. TARGET AREA: levator scapulae SPECS - Size: 92 x 72 x 41 mm - Material: 106.4…
Swappable Peanut A peanut body with swappable lobes, so one core covers several depths. TARGET AREA: general, modular SPECS - Size: 144 x 60 x 60 mm - Material: 230.7 cm3 - Solid-core print: it does not compress, so the pressure you set…
Jaw Knob A small knob for the jaw muscles. Masseter is strong and dense and takes real pressure over a very small area, so the contact point is deliberately tiny. TARGET AREA: masseter, temporalis SPECS - Size: 82 x 24 x 24 mm - Material:…
Trap Hook A hook that reaches over your own shoulder to the upper trap, so you can load it without holding your arm up in the position that tightens it. TARGET AREA: upper trap SPECS - Size: 116 x 26 x 34 mm - Material: 35.1 cm3 -…
Trap Roller A small roller for the upper trap, sized to stay on the muscle rather than rolling onto the spine of the scapula. TARGET AREA: upper trap SPECS - Size: 83 x 54 x 49 mm - Material: 85.9 cm3 - Solid-core print: it does not…
Spinal Wheel Small A smaller wheel: tighter radius, more local extension, for people the full-size wheel overshoots. TARGET AREA: thoracic extension, tighter radius SPECS - Size: 90 x 95 x 95 mm - Material: 80.6 cm3 - Solid-core print: it…
Free sample pack — 3 printable parts: Air Fitting Bin, Blow Gun Holster, Coil Hose Ring Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed…
Free sample pack — 3 printable parts: Cable Clip Large, Cord Wrap Hook, Hose Hook Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight to…
Free sample pack — 3 printable parts: Caulk Gun Holster, Adhesive Tray, Glue Gun Hook Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed…
Free sample pack — 3 printable parts: Cleat Bin, Wall Spacer, Cleat Hook Blank Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight to a…
Free sample pack — 3 printable parts: Brush Rack, Paint Can Shelf, Roller Hook Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight to a…
Free sample pack — 3 printable parts: J Hook Medium, Cutter Slot Rail 4, Loose Plier Bin Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed…
Free sample pack — 3 printable parts: Ear Pro Hook, First Aid Bin, Glove Clip Pair Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight…
Free sample pack — 3 printable parts: Accessory Bin, Dremel Holster, Rotary Bit Block Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed…
Free sample pack — 3 printable parts: Screwdriver Rack 5, Chisel Rack, Mini Rack Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight to…
Free sample pack — 3 printable parts: Component Bin, Driver Probe Block, Iron Holster Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed…
Free sample pack — 3 printable parts: Ball Holder Ring, Bat Clip Pair, Fishing Rod Clip Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed…
Free sample pack — 3 printable parts: Bottle Ring 60, Can Shelf, Glue Bottle Ring Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight to…
Free sample pack — 3 printable parts: Wrench Rail 10, Adjustable Wrench Hook, Allen Key Block Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed…
Foot Peanut A twin-lobe profile that spans the arch instead of poking a single point into it. Debossed FOOT. TARGET AREA: plantar fascia, arch SPECS - Size: 112 x 92 x 42 mm - Material: 169.8 cm3 - Solid-core print: it does not compress,…
Glute Dome A large spinning dome for glute medius and minimus, sized so bodyweight spreads rather than concentrating into one painful point. TARGET AREA: glute med / min SPECS - Size: 130 x 130 x 80 mm - Material: 504.9 cm3 - Solid-core…
Heel Dome Concentrates pressure at the heel and proximal arch where the plantar fascia anchors. Debossed STRONG. TARGET AREA: heel, proximal arch SPECS - Size: 69 x 91 x 37 mm - Material: 98.5 cm3 - Solid-core print: it does not compress,…
Iliacus Wedge The iliacus sits on the inner surface of the ilium, which a ball cannot reach. This wedge presents an angled face that follows the inside of the hip bone. TARGET AREA: iliacus, inner hip SPECS - Size: 156 x 88 x 76 mm -…
Neck Peanut V2 A shorter, tighter revision for smaller necks and more targeted suboccipital work. Debossed BUILT NECK. TARGET AREA: suboccipitals SPECS - Size: 86 x 34 x 26 mm - Material: 34.4 cm3 - Solid-core print: it does not compress,…
Pec Knob A single contact point sized for pec minor. The knob concentrates load where a ball skates off the rib cage. TARGET AREA: pec minor, anterior shoulder SPECS - Size: 82 x 96 x 49 mm - Material: 119.8 cm3 - Solid-core print: it…
QL Tool QL lives between the last rib and the iliac crest. This fits that gap and loads the muscle without pressing the floating rib. TARGET AREA: quadratus lumborum SPECS - Size: 120 x 104 x 45 mm - Material: 208.2 cm3 - Solid-core…
