Counting matching models…
This is a servo hinge setup for use with MIPRESIDENT's Iron Man Mark III helmet ( http://www.thingiverse.com/thing:260152 ). You can see my final build here: http://www.thingiverse.com/make:286759 And a video of it in use here:…
Faster print speeds can result in prints coming out less glossy even when printing with the same material. I've included a PrusaSlicer project that contains 9 test units all printing with the same settings, except each one has the…
31x22x19mm sided corner bracket with central M5 screw hole. Incredibly strong Category: DIY
This is a remix of Armatures design (Thing: 4819929). They had already designed what seems to be a perfect replacement for the official iFlight gopro mount for the Chimera 7. The only issue I had is it didn't feature a countersunk hole…
This is a hook which clips onto a crutch, with the purpose of holding a bag from the crutch itself. I had an accident recently for which I'm now in crutches and wearing a bag isn't safe so I was after some way of carrying things without…
This is a super simple mount for fitting any webcam with a tripod thread on it inside the Snapmaker 2 enclosure. I've personally used it to fit 2 webcams, 1 as a high wide to show a more overall view of the work area, and a second one…
This is a rear mount for both a BN220 GPS unit & a TBS crossfire immortal antenna to fit the iFlight XL5V5 frame (Drones such as the Nazgul5). Unlike others out there, this doesn't replace any of the existing parts. The rear frame bars…
This is a cassette tape style USB stick holder I designed. Perfect for giving your valentine a mixtape in the modern age. It's designed for use with this range of Kingston USB sticks: https://ebay.to/3rxhbdn You can see a video of it in…
The Prusament spools do tend to work with the Bambu Labs AMS, but they are technically wider than Bambu's stated maximum width, and there are a couple of other things that occasionally cause issues. Not only are Prusa spools a tad too…
This is a unit designed to be made into a HEPA air filter. With a 120mm fan mounted each side, it both pushes and pulls air through the HEPA filters slotted inbetween. It can be mounted directly to an enclosure (as pictured), or with a…
Whilst preparing for the sequel to my popular YouTube video on silencing the CR-10 ( https://youtu.be/Vlta31wswAE ), I designed these feet for the CR-10 range to dampen noise from vibrations against the table surface. They make a…
I invested in a fire extinguisher just incase the worst case scenario happened. This is a stand to keep it neat an safely upright. Designed to fit any extinguisher up to 104mm in diameter, this stand uses a 200mm squared footprint to keep…
This is a phone holder designed for the One+ 3 Mobile phone with a slim case on, but will hold anything approx 77.4mm wide and 7mm deep.. NOTE: This is NOT a stand alone phone holder but is designed to work with the Brodit mount system. I…
This is a simple box to store the 1600mw Snapmaker laser module toolhead in when not in use. It keeps it protected and free of dust and prevents the lens protector or camera being scratched or knocked. I use this so I can just store it in…
This is a case to hold the RaspberryPi 3B+ along with a 30mm or 40mm fan, and can be mounted to the Prusa Mk3 frame, or can just sit somewhere. It has been designed to accommodate the Noctua 40x40mm fan (which is silent compared to other…
This is a holder which holds all the bed surfaces for the Snapmaker 2.0 A250T, as well as the tool box which comes with the Snapmaker 2.0 and it slots onto the side of the enclosure. The print bed and CNC bed just slot onto the 'hook'…
This is a protector for safely storing two DJI Inspire 2 SSD cards. When out on location during a shoot, if you fill up a card but are not near your case, you may feel inclined to slip the card into your pocket or your bag. This isn't a…
This is a phone holder designed for the One+ 2 Mobile phone but will hold anything of a similar depth and width (can hold phones slightly bigger in both dimensions). NOTE: This is NOT a stand alone phone holder but is designed to work…
A simple clip which can be fitted using any of the casing screws (I have used the top rear screw of each side panel) allowing you to easily clip the left or right filament tube out of the way when you haven't got anything loaded into it.…
This is a compact case designed specifically to hold 2 pairs of 3D glasses from the cinema so you can keep then clean and scratch free for your next trip down there. I'll be keeping this in my cars glove compartment so I always have them…
This is a protector for safely storing a single DJI Inspire 2 SSD card. When out on location during a shoot, if you fill up a card but are not near your case, you may feel inclined to slip the card into your pocket or your bag. This isn't…
When getting into my car, I didn't want to spend the time sitting down and searching for the USB cable, and plugging it in, then having my phone flop around whilst driving so I can use Android Auto. I designed this so I can easily just…
This is designed to securely grip an 80mm extractor hose onto a 70mm diameter tube. Effectively doing the job of a jubilee clip (though not adjustable) Directions Slot the TubeLock onto the hose (with the thicker grip facing away from the…
This is a protective cap for the Aqua Pure water bottle to protect the drinking end from getting dirty when travelling, and a tether to make sure you don't lose it. I've travelled through jungles and rain forests with this cap and it…
These are all currently available results.
